A numerical procedure for predicting the performance of high pressure homogenizing valves

This paper describes a numerical procedure for the prediction of the homogenizing performance of high pressure homogenizing valves used in diary plants. The method is based on a strict interaction between a complex CFD code and a simple homogenizing simulation code developed by the authors. This latter implements a mathematical model for the evaluation of droplets break-up, that needs an accurate evaluation of few significant fluid dynamic parameters in the whole fluid dynamic domain inside the valve. Due to the relevant pressure gradients within the flow and to the possibility of cavitation, particular attention has been paid in defining the fluid model, the mesh and the parameters required for CFD simulations. Notwithstanding the quite simple model of the homogenizing process, comparatively with the complexity of phenomena involved, the first results obtained are in general agreement with the experimental data available. These results point out the potential of the procedure proposed as a starting point for further implementation of more complex effects.     

Thermal Poling of Soda‐Lime Silica Glass with Nonblocking Electrodes—Part 1: Effects of Sodium Ion Migration and Water Ingress on Glass Surface Structure

It is generally well known that not only the sodium itself, but also the non‐bridging oxygen (NBO) sites associated with sodium ions are largely responsible for the surface reactivity of soda‐lime‐silica (SLS) glass. Thermal poling can modify the distribution of sodium in the subsurface region. In this work, a commercial SLS float glass was thermally poled using nonblocking electrodes in air. The Na⁺?depleted anode surface and the Na⁺?gradient cathode surface were characterized using a variety of methods to find the compositional, structural and morphological effects of thermal poling. Of particular significance is the use of nondestructive vibrational spectroscopy methods, which can lead to new and improved understanding of water interactions with sodium and its sites in the glass. It was found that during thermal poling, the Na⁺?depleted glass network on the anode side undergoes condensation reactions of NBO sites accompanied by the increase in concentrations of silanol (SiOH) groups and molecular water species. In contrast, silanol and water species do not increase and the silicate network change is negligible in the Na⁺?gradient cathode side. Vibrational sum frequency generation (SFG) spectroscopy analysis revealed the difference in distributions of hydrous species in the Na⁺?depleted and Na⁺?gradient surfaces. The structural information of the thermally‐poled surfaces provides critical insights needed to understand the mechanical and mechanochemical properties of the Na⁺?concentration modified SLS glass surfaces reported in the Part 2 companion paper.     

Ionic Conductivity in Sodium–Alkaline Earth–Aluminosilicate Glasses

The effect of alkaline‐earth ions on Na transport in aluminosilicate glasses was studied by measuring ionic conductivity for a systematic compositional series of Na₂O–RO–Al₂O₃–SiO₂ glasses (R=Mg, Ca, Sr, Ba). The Na transport in aluminosilicate glass could be affected by compositional changes in aluminum coordination and nonbridging oxygen as well as physical properties such as dielectric constant, shear modulus, and ionic packing factor. Through careful experimental designs and measurements, the main determinants among these parameters were identified. ²⁷Al MAS‐NMR indicated that all aluminum species contained in these glasses are four‐coordinated. The activation energy for ion conductivity decreased with increasing aluminum content and decreasing ionic radii of the alkaline‐earth ion in the region where [Al] < [Na]. When the aluminum content exceeded the sodium content ([Al] > [Na]), the composition dependence of the activation energy depended on the specific alkaline earth. These results are explained based on variations in free volume and dielectric constant caused by structural changes around the AlO₄ charge compensation sites. These structure changes occur in response to the smaller size and higher field strength of the alkaline‐earth ions, and are most prevalent in the compositions which require bridging of two AlO₄ sites by the alkaline‐earth ion for charge compensation.     

Ficolin-2 Plasma Level Assesses Liver Fibrosis in Non-Alcoholic Fatty Liver Disease

Fibrosis is the strongest predictor for disease-specific mortality in non-alcoholic fatty liver diseases (NAFLD), but the need for liver biopsy limits its diagnosis. We assessed the performance of plasma ficolin-2 (FCN-2) as a biomarker of fibrosis identified by an in silico discovery strategy. Two hundred and thirty-five morbidly obese (MO) subjects with biopsy-proven NAFLD stratified by fibrosis stage (F0, n = 44; F1, n = 134; F2, n = 46; F3/F4, n = 11) and 40 cirrhotic patients were enrolled. The cohort was subdivided into discovery (n = 76) and validation groups (n = 159). The plasma level of FCN-2 and other candidate markers was determined. FCN-2 was inversely correlated with the stage of liver fibrosis (ρ = −0.49, p < 0.001) independently of steatosis (p = 0.90), inflammation (p = 0.57), and ballooning (p = 0.59). In the global cohort, FCN-2 level decreased significantly in a stepwise fashion from F0/F1 (median 4753 ng/mL) to F2–F3–F4 (2760 ng/mL) and in cirrhotic subjects (1418 ng/mL). The diagnostic performance of FCN-2 in detecting F ≥ 2 was higher than other indexes (APRI, FIB-4) (AUROC 0.82, 0.68, and 0.6, respectively). The accuracy improved when combined with APRI score and HDL values (FCNscore, AUROC 0.85). Overall, the FCN-2 plasma level can accurately discriminate liver fibrosis status (minimal vs. moderate/advanced) significantly improving the fibrosis diagnostic algorithms.     

Lipidomic Approaches to Study HDL Metabolism in Patients with Central Obesity Diagnosed with Metabolic Syndrome

The metabolic syndrome (MetS) is a cluster of cardiovascular risk factors characterised by central obesity, atherogenic dyslipidaemia, and changes in the circulating lipidome; the underlying mechanisms that lead to this lipid remodelling have only been partially elucidated. This study used an integrated “omics” approach (untargeted whole serum lipidomics, targeted proteomics, and lipoprotein lipidomics) to study lipoprotein remodelling and HDL composition in subjects with central obesity diagnosed with MetS (vs. controls). Compared with healthy subjects, MetS patients showed higher free fatty acids, diglycerides, phosphatidylcholines, and triglycerides, particularly those enriched in products of de novo lipogenesis. On the other hand, the “lysophosphatidylcholines to phosphatidylcholines” and “cholesteryl ester to free cholesterol” ratios were reduced, pointing to a lower activity of lecithin cholesterol acyltransferase (LCAT) in MetS; LCAT activity (directly measured and predicted by lipidomic ratios) was positively correlated with high-density lipoprotein cholesterol (HDL-C) and negatively correlated with body mass index (BMI) and insulin resistance. Moreover, many phosphatidylcholines and sphingomyelins were significantly lower in the HDL of MetS patients and strongly correlated with BMI and clinical metabolic parameters. These results suggest that MetS is associated with an impairment of phospholipid metabolism in HDL, partially led by LCAT, and associated with obesity and underlying insulin resistance. This study proposes a candidate strategy to use integrated “omics” approaches to gain mechanistic insights into lipoprotein remodelling, thus deepening the knowledge regarding the molecular basis of the association between MetS and atherosclerosis.     

Accuracy of FIB-4 to Detect Elevated Liver Stiffness Measurements in Patients with Non-Alcoholic Fatty Liver Disease: A Cross-Sectional Study in Referral Centers

The identification of advanced fibrosis by applying noninvasive tests is still a key component of the diagnostic algorithm of NAFLD. The aim of this study is to assess the concordance between the FIB-4 and liver stiffness measurement (LSM) in patients referred to two liver centers for the ultrasound-based diagnosis of NAFLD. Fibrosis 4 Index for Liver Fibrosis (FIB-4) and LSM were assessed in 1338 patients. A total of 428 (32%) had an LSM ≥ 8 kPa, whereas 699 (52%) and 113 (9%) patients had an FIB-4 < 1.3 and >3.25, respectively. Among 699 patients with an FIB-4 < 1.3, 118 (17%) had an LSM ≥ 8 kPa (false-negative FIB-4). This proportion was higher in patients ≥60 years, with diabetes mellitus (DM), arterial hypertension or a body mass index (BMI) ≥ 27 kg/m². In multiple adjusted models, age ≥ 60 years (odds ratio (OR) = 1.96, 95% confidence interval (CI) 1.19–3.23)), DM (OR = 2.59, 95% CI 1.63–4.13), body mass index (BMI) ≥ 27 kg/m² (OR = 2.17, 95% CI 1.33–3.56) and gamma-glutamyltransferase ≥ 25 UI/L (OR = 2.68, 95% CI 1.49–4.84) were associated with false-negative FIB-4. The proportion of false-negative FIB-4 was 6% in patients with none or one of these risk factors and increased to 16, 31 and 46% among those with two, three and four concomitant risk factors, respectively. FIB-4 is suboptimal to identify patients to refer to liver centers, because about one-fifth may be false negative at FIB-4, having instead an LSM ≥ 8 KPa.     

Catalytic performance of Co3O4/CeO2 and Co3O4/CeO2–ZrO2 composite oxides for methane combustion: Influence of catalyst pretreatment temperature and oxygen concentration in the reaction mixture

The influence of catalyst pre-treatment temperature (650 and 750 °C) and oxygen concentration (λ = 8 and 1) on the light-off temperature of methane combustion has been investigated over two composite oxides, Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ containing 30 wt.% of Co₃O₄. The catalytic materials prepared by the co-precipitation method were calcined at 650 °C for 5 h (fresh samples); a portion of them was further treated at 750 °C for 7 h, in a furnace in static air (aged samples).

Tests of methane combustion were carried out on fresh and aged catalysts at two different WHSV values (12 000 and 60 000 mL g⁻¹ h⁻¹). The catalytic performance of Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ were compared with those of two pure Co₃O₄ oxides, a sample obtained by the precipitation method and a commercial reference. Characterization studies by X-ray diffraction (XRD), BET and temperature-programmed reduction (TPR) show that the catalytic activity is related to the dispersion of crystalline phases, Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ as well as to their reducibility. Particular attention was paid to the thermal stability of the Co₃O₄ phase in the temperature range of 750–800 °C, in both static (in a furnace) and dynamic conditions (continuous flow). The results indicate that the thermal stability of the phase Co₃O₄ heated up to 800 °C depends on the size of the cobalt oxide crystallites (fresh or aged samples) and on the oxygen content (excess λ = 8, stoichiometric λ = 1) in the reaction mixture. A stabilizing effect due to the presence of ceria or ceria–zirconia against Co₃O₄ decomposition into CoO was observed.

Moreover, the role of ceria and ceria–zirconia is to maintain a good combustion activity of the cobalt composite oxides by dispersing the active phase Co₃O₄ and by promoting the reduction at low temperature.     

Regulatory Noncoding and Predicted Pathogenic Coding Variants of CCR5 Predispose to Severe COVID-19

Genome-wide association studies (GWAS) found locus 3p21.31 associated with severe COVID-19. CCR5 resides at the same locus and, given its known biological role in other infection diseases, we investigated if common noncoding and rare coding variants, affecting CCR5, can predispose to severe COVID-19. We combined single nucleotide polymorphisms (SNPs) that met the suggestive significance level (P ≤ 1 × 10⁻⁵) at the 3p21.31 locus in public GWAS datasets (6406 COVID-19 hospitalized patients and 902,088 controls) with gene expression data from 208 lung tissues, Hi-C, and Chip-seq data. Through whole exome sequencing (WES), we explored rare coding variants in 147 severe COVID-19 patients. We identified three SNPs (rs9845542, rs12639314, and rs35951367) associated with severe COVID-19 whose risk alleles correlated with low CCR5 expression in lung tissues. The rs35951367 resided in a CTFC binding site that interacts with CCR5 gene in lung tissues and was confirmed to be associated with severe COVID-19 in two independent datasets. We also identified a rare coding variant (rs34418657) associated with the risk of developing severe COVID-19. Our results suggest a biological role of CCR5 in the progression of COVID-19 as common and rare genetic variants can increase the risk of developing severe COVID-19 by affecting the functions of CCR5.     

Effect of loading‐unloading cycles on impact‐damaged jute/glass hybrid laminates

The production of glass/plant fiber hybrid laminates is a possibility for obtaining semistructural materials with sufficient impact properties, and a better life cycle analysis (LCA) profile than fiberglass. The simplest and possibly the most effective configuration for the production of these hybrids would involve the use of a plant fiber reinforced laminate as the core between two glass fiber reinforced laminates. A main limitation to the use of composites including plant fibers is that their properties may be significantly affected by the presence of damage, so that even the application of a low stress level can result in laminate failure. In particular, it is suggested that when loading is repeatedly applied and removed, residual properties may vary in an unpredictable way. In this work, E‐glass/jute hybrid reinforced laminates, impacted in a range of energies (10, 12.5, and 15 J), have been subjected to post‐impact cyclic flexural tests with a step loading procedure. This would allow evaluating the effect of damage dissipation offered by the plant fiber reinforced core. The tests have also been monitored by acoustic emission (AE), which has confirmed the existence of severe limitations to the use of this hybrid material when impacted at energies close to penetration. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

Polyacrylamides revisited: flocculation of kaolin suspensions and mature fine tailings

A series of acrylamide‐based water‐soluble (co)polymers was synthesized and they were investigated as flocculants of model kaolin suspensions and mature fine tailings of oil sands. The effects of molar mass, charge density, and polymer concentration on flocculation efficiency were studied by monitoring the initial settling rate during sedimentation. Hydrolyzed polyacrylamide (HPAM) with high molar mass and intermediate acrylic acid contents (0.14–0.41 mol/mol (14–41 mol%)) performed better in flocculation tests on kaolin suspensions requiring lower dose for maximum initial settling rate than native polyacrylamide (PAM). Surface force measurements showed that at low polymer concentrations (1 ppm), the partially‐adsorbed polymer induced a bridging attraction between the mica surfaces. Increasing the polymer concentration to 10 and 50 ppm caused purely repulsive forces. The presence of anionic groups in HPAM led to stronger repulsion, which was also demonstrated by the higher viscosity and larger hydrodynamic radius of the charged polymer. The charge‐induced increase in the viscosity of polymer solutions was suppressed by the screening effect of salts in a buffer solution and reducing the viscosity is desirable in the injection of flocculants in the industrial process.