XRD studies of electrochemically hydrided–dehydrided thin films of the alloy AZ31 and AZ31 with Ti

A magnetron sputtered thin films of the AZ31 alloy and AZ31 alloy with Ti capped with Pd were electrochemically hydrogenated and dehydrogenated in a 3 M KOH solution. A phase composition and structure of the films were studied by XRD. It has been determined that the behaviour of magnetron sputtered alloy AZ31 during electrochemical charging with hydrogen was alike that of pure Mg. The shift of the XRD peak Mg (0 0 0 2) to lower angles indicates that a hydrogen solid solution in the AZ31 alloy was formed along with MgH₂. When the AZ31 alloy with 18 at.% of Ti was electrochemically hydrogenated the whole film was transformed into hydride. The minor part of the hydride was in the nanocrystalline state with a structure of rutile and a major part of the hydride was in the amorphous state. After dehydrogenation only a part of the alloy recovered and the rest remained in the state of amorphous hydride. A positive shift of peak Pd (1 1 1) was observed in all of the XRD patterns for hydrogenated films. At least partially the shift should be associated with the compressive stresses in the top-cap layer of Pd, which arose due to the hydrogenation of the AZ31 alloy.     

Feasibility of CHP-plants with thermal stores in the German spot market

The European Energy Exchange (EEX) day ahead spot market for electricity in Germany shows significant variations in prices between peak and off-peak hours. Being able to shift electricity production from off-peak hours to peak hours improves the profit from CHP-plant operation significantly. Installing a big thermal store at a CHP-plant makes it possible to shift production of electricity and heat to hours where electricity prices are highest especially on days with low heat demand. Consequently, these conditions will have to influence the design of new CHP-plants. In this paper, the optimal size of a CHP-plant with thermal store under German spot market conditions is analyzed. As an example the possibility to install small size CHP-plant instead of only boilers at a Stadtwerke delivering 30,000 MW h-heat for district heating per year is examined using the software energyPRO. It is shown that, given the economic and technical assumptions made, a CHP-plant of 4 MW-el with a thermal store participating in the spot market will be the most feasible plant to build. A sensitivity analysis shows to which extent the optimal solution will vary by changing the key economic assumptions.     

The Antimicrobial Effect of Spice‐Based Marinades against Campylobacter jejuni on Contaminated Fresh Broiler Wings

The antimicrobial effect of spice‐based marinades against Campylobacter jejuni on inoculated fresh broiler wings was investigated. Experiments were carried out with 1 strain of C. jejuni and 6 marinades. Four experimental marinades were composed for the study and contained spices (thyme, rosemary, basil, marjoram, and so on) and different combination of bioactive compounds. Two marinades were commercial and contained spices (black pepper, sweet red pepper, and so on) and chemical additives (monosodium glutamate, sodium diacetate, calcium lactate), 1 commercial marinade was also enriched with bioactive compounds (linalool, cinnamaldehyde, lactic acid). Total aerobic bacterial count was examined to estimate the possible effect of tested marinades on the shelf‐life of marinated broiler wings. Study revealed that thyme‐based marinade was the most effective against C. jejuni on broiler wings and reduced the numbers of campylobacters by 1.04 log colony forming unit (CFU)/g (P ≤ 0.05) during storage for 168 h at 4 °C temperature. Moreover, it was more effective against C. jejuni than commercial marinade with 0.47 log CFU/g (P ≤ 0.05) reduction effect. Both experimental and commercial marinades had very similar effect on the total aerobic bacterial count. Although experimental and commercial marinades had different effect on pH of broiler wings, this parameter did not show a major impact on the antimicrobial effect of tested marinades (P ≥ 0.05). Our study shows that experimental natural thyme‐based marinade can reduce numbers of C. jejuni more effectively than tested commercial marinades.     

Investigation of hydrogen generation from sodium borohydride using different cobalt catalysts

Effective Co/Cu, CoB/Cu, and CoBM (M = Mo,Zn,Fe)/Cu catalysts were prepared on the copper surface by a simple electroless deposition method using a morpholine borane as a reducing agent in the glycine solution. The activity of the deposited catalysts was investigated for hydrogen generation from an alkaline sodium borohydride solution. It was determined that these synthesized catalysts demonstrated the catalytic activity for the hydrolysis reaction of NaBH₄. The lowest obtained activation energy (E_A) of the hydrolysis reaction of NaBH₄was 27 kJ mol^?1 for the CoBMo/Cu catalyst. The hydrogen generation rate of 15.30 ml min^?1 was achieved using CoBMo/Cu catalysts at 313 K and it increased ~3.5 times with the increase of temperature to 343 K. The highest hydrogen generation rate obtained by CoBMo/Cu films may be related to the hierarchical cauliflower-shaped 3D structures and the high roughness surface area. Moreover, the CoBMo/Cu catalyst showed an excellent reusability.     

A Critical Assessment of Experimental Methods for Determining the Dynamic Mechanical Characteristics of Shape Memory Polymers

Experimental study of temperature‐ and frequency‐dependent properties of the commercially available shape memory polymer Tecoflex? EG 72D (TFX) (Lubrizol, USA) using dynamic mechanical analysis (DMA) technique is presented. Temperature scan DMA tests have been carried out in three distinct deformation modes, uniaxial tension, three‐point bending, and simple torsion, using two different testing rigs at different test parameters (frequency, strain amplitude, and heating rate) in temperatures ranging from below to above the glass transition temperature. The influence of different test parameters and some discrepancies in the temperature‐dependent storage and loss moduli (and hence the loss factor) measured by DMA in different deformation modes are discussed.     

Determination of the Optimal Fourier Number on the Dynamic Thermal Transmission

This article represents the result of experimental research on transient heat transfer in a multilayered (heterogeneous) wall. Our non-steady thermal transmission simulation is based on a finite-difference calculation method. The value of a Fourier number shows the similarity of thermal variation in conditional layers of an enclosure. Most scientists recommend using no more than a value of 0.5 for the Fourier number when performing calculations on dynamic (transient) heat transfer. The value of the Fourier number is determined in order to acquire reliable calculation results with optimal accuracy. To compare the results of simulation with experimental research, a transient heat transfer calculation spreadsheet was created. Our research has shown that a Fourier number of around 0.5 or even 0.32 is not sufficient (\({\approx }17\,\%\) of oscillation amplitude) for calculations of transient heat transfer in a multilayered wall. The least distorted calculation results were obtained when the multilayered enclosure was divided into conditional layers with almost equal Fourier number values and when the value of the Fourier number was around 1/6, i.e., approximately 0.17. Statistical deviation analysis using the Statistical Analysis System was applied to assess the accuracy of the spreadsheet calculation and was developed on the basis of our established methodology. The mean and median absolute error as well as their confidence intervals has been estimated by the two methods with optimal accuracy (\({F}_{\mathrm{oMDF}}= 0.177\) and \(F_{\mathrm{oEPS}}= 0.1633\) values).     

A topic network analysis of the system turn in the environmental sciences

Scientometrics - The concept of Earth system science denotes a shift in the scientific discourse from disciplinary accounts of isolated components of the global environment towards the holistic and...