Development of semitransparent wood‐polymer composites

A new material has been developed consisting of pieces of wood embedded within a matrix of acrylic polymer, resulting in a transparent or semitransparent wood‐based product. This material presents quite appealing aesthetic features, thereby opening new possibilities for decorative applications. Because acrylic and methacrylic monomers are in the liquid state at room temperature, it is possible to introduce wood (in the current case, walnut wood) into a mixture of acrylic (hydroxypropyl acrylate) and/or methacrylic monomers (methyl methacrylate and 2‐hydroxyethyl methacrylate) along with a plasticizer (dioctyl phthalate) in the presence of a chemical initiator (benzoyl peroxide). A transparent polymeric matrix with dispersed wood is then obtained through bulk free‐radical polymerization. Introducing this reaction mixture along with pieces of wood into a mold results in a wood‐polymer composite. A 2^4?1 experimental fractional factorial design was implemented to study the importance of the composition of these materials on several relevant properties. The sheets produced were characterized by tensile testing, dynamic mechanical thermal analysis, thermal gravimetric analysis, and heat deflection temperature. The models obtained for predicting each property pointed to valuable insights regarding the influential constituents. In particular, our results suggested that monomers to be used in future applications of this material should be selected in terms of their cost and the desired flexibility for the final product, not in terms of their polarity. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Fatty acid composition of egg yolk phospholipid fractions following feed supplementation of Lohmann Brown hens with humic-fat preparations

The effect of feed supplementation with humic-fat preparations on the fatty acid composition of egg yolk phospholipid fractions was studied. The Lohmann Brown was the experimental hen strain and two feeding mixtures were applied – the standard feed and the mixture supplemented with humic-fat preparations. The fatty acid profile of yolk lipids was significantly affected (P = .05) by the supplementation of feed and total increase of n-3 polyunsaturated fatty acids (PUFA) was established. A different distribution of n-3 PUFA in egg yolk lipid fractions was observed: α-linolenic acid (18:3) was found in the triacylglycerol fraction, whereas docosahexaenoic acid (22:6) was detected in the phospholipid fractions. Supplementation of the hen’s diet with humic-fat preparations resulted in the production of n-3 enriched eggs with decreased n-6/n-3 ratio in all phospholipid fractions in comparison to the eggs from the control group.     

Gas and Electric Harmonization Through Technology

Technology is constantly changing the way business is conducted in the energy industry. One of the gauges that must be considered is when to use the latest and greatest technology and when to stick with the tried and true. But even with the tried and true, sometimes something new must be done when other peripheral advances force a forward movement.     

The effect of oxygen implantation on the corrosion and electrochemical properties of iron

Using the method of recording anode potentiodynamic curves in neutral and mildly alkaline borate buffer solutions, the corrosion and electrochemical behavior of iron-armco samples bombarded with oxygen ions is studied. It is shown by the method of X-ray photoelectron spectroscopy that, during such bombardment, implantation of oxygen into the surface layers of iron occurs. Therein, iron oxides of variable composition and various forms of adsorbed and absorbed oxygen are formed. These oxygen formations contribute to transfer of the iron surface to a more corrosion-resistant, passive state.     

New Eugenol Derivatives with Enhanced Insecticidal Activity

Eugenol, the generic name of 4-allyl-2-methoxyphenol, is the major component of clove essential oil, and has demonstrated relevant biological potential with well-known antimicrobial and antioxidant actions. New O-alkylated eugenol derivatives, bearing a propyl chain with terminals like hydrogen, hydroxyl, ester, chlorine, and carboxylic acid, were synthesized in the present work. These compounds were later subjected to epoxidation conditions to give the corresponding oxiranes. All derivatives were evaluated against their effect upon the viability of insect cell line Sf9 (Spodoptera frugiperda), demonstrating that structural changes elicit marked effects in terms of potency. In addition, the most promising molecules were evaluated for their impact in cell morphology, caspase-like activity, and potential toxicity towards human cells. Some molecules stood out in terms of toxicity towards insect cells, with morphological assessment of treated cells showing chromatin condensation and fragmentation, which are compatible with the occurrence of programmed cell death, later confirmed by evaluation of caspase-like activity. These findings point out the potential use of eugenol derivatives as semisynthetic insecticides from plant natural products.     

Extraction of phenolic compounds from fresh leaves: A comparison of methods

The conventional sonicator/shaker bath method for phenolic extraction was compared with a less traditional one using a homogenizer. The homogenizer proved to be both more efficient and consistent in extracting phenolics from tender, as well as tough, leaves. We propose that adoption of the homogenizer technique will increase phenolic yield and efficiency.     

Development of a Failure Model for the Adhesively Bonded Tubular Single Lap Joint

The accurate calculation of the stresses and torque capacities of adhesively bonded joints is not possible without understanding the failure phenomena of the adhesive joints and the nonlinear behavior of the adhesive.

In this paper, an adhesive failure model of the adhesively bonded tubular single lap joint with steel-steel adherends was proposed to predict the torque capacity accurately.

The model incorporated the nonlinear behavior of the adhesive and the different failure modes in which the adhesive failure mode changed from bulk shear failure, via transient failure, to interfacial failure between the adhesive and the adherend, according to the magnitudes of the residual thermally-induced stresses from fabrication.     

Surface modifications of gasketless carbon composite bipolar plates for gas tightness of PEM fuel cells

A carbon fiber composite gasketless bipolar plate for proton exchange membrane (PEM) fuel cells was developed using the groove of a trapezoidal shape, which develops large contact stresses due to a wedge mechanism. The surface of the composite groove was modified to increase gas tightness without using rubber gaskets. Graphite, polyimide (PI) and polyethylene terephthalate (PET) film were co-cure bonded on the surface of the bipolar plate during the compression molding process to change its surface hardness, which could affect the gas tightness. Additionally, plasma surface treatment and mechanical abrasion were used to modify the surface morphologies. Corrosion and gas tightness tests on the surface modified bipolar plates were performed to verify the reliability of the gasketless sealing method.