Plasma modification of cellulose derivatives as biomaterials

A film of cellulose acetate was submitted to a cold plasma of tetrafluoromethane or of sulfur hexafluoride. The interactions of these cold plasmas and cellulose acetate lead to a material whose surface has been modified by fluorination. Comparison of CF₄ or SF₆ plasma treatment shows that fluorine atoms provided by each kind of plasma induce degradation and grafting of fluorocarbon radicals on the surface. As a consequence, the surface energy decreases and offers the possibility of a better response of plasma-modified cellulose derivatives used as biomaterials (e.g. hemodialysis membrane).     

—Review Paper—Current State-Of-The-Art Measurements Of Ozone In The Gas Phase And In Solution

This paper is a critical review and summary of the analytical procedures currently used by operating water utilities to control ozone treatment processes, considering disinfection as well as the many oxidative applications of ozone in water treatment applications. The role of common interferences in the various methods is described.

In operating U S., Canadian, European, and Japanese water treatment plants currently employing ozone as a primary disinfectant, ozone nearly always is followed by the addition of small quantities of chlorine, chlorine dioxide, or chloramine to provide the residual in the distribution system and to act as a secondary disinfectant. Clearly, the analytical procedures used must distinguish between the various species. This review critically presents these various factors and their implication with respect to “true values” of ozone determined under widely varying conditions.     

Influence of Ozone on the Photocatalytic Oxidation of Organic Compounds

Heterogeneous photocatalytic oxidation processes using titanium oxide as a photocatalyst are widely discussed topics in research for water and waste water treatment. Oxygen fed into the systems is normally used as oxidizing agent. However few investigations exist concerning the use of ozone as an additional oxidant. In this work the influence of ozone on the photocatalytic degradation of organic compounds are described. The results are compared with those by using ozone, UV/O₃ and UV/TiO₂/O₂. The oxidation reactions were performed at pH 3 and 7.

In this research compounds of the different classes were used: glyoxal, pyrrole-2-carboxylic acid, p-toluenesulfonic acid and naphthalene-1,5-disulfonic acid. Depending on the classes of compounds in some cases the elimination rates of the initial compounds is enhanced by using UV/TiO₂/O₃ compared to UV/O₃ or O₃ alone. But in all cases greatest DOC elimination is achieved by using UV/TiO₂/O₃.     

3D MRI of explanted sheep hearts with submillimeter isotropic spatial resolution: comparison between diffusion tensor and structure tensor imaging

Magnetic Resonance Materials in Physics, Biology and Medicine - The aim of the study is to compare structure tensor imaging (STI) with diffusion tensor imaging (DTI) of the sheep heart...     

On best practices: The Institute of Medicine scheme for developing,validating, and demonstrating clinical utility of omics-based diagnostic and predictive tests

The Institute of Medicine of the US National Academy of Sciences issued a major report in 2012 that provides important guidance for the proteomics community for credible and transparent development of all kinds of omics-based diagnostic and prognostic tests. The key elements are summarized here to provide a compass that can guide the studies emerging from many laboratories as reported in this special issue of Proteomics Clinical Applications on “Diagnostic Proteomics.”     

Atom-probe for FinFET dopant characterization

With the continuous shrinking of transistors and advent of new transistor architectures to keep in pace with Moore's law and ITRS goals, there is a rising interest in multigate 3D-devices like FinFETs where the channel is surrounded by gates on multiple surfaces. The performance of these devices depends on the dimensions and the spatial distribution of dopants in source/drain regions of the device. As a result there is a need for new metrology approach/technique to characterize quantitatively the dopant distribution in these devices with nanometer precision in 3D.In recent years, atom probe tomography (APT) has shown its ability to analyze semiconductor and thin insulator materials effectively with sub-nm resolution in 3D. In this paper we will discuss the methodology used to study FinFET-based structures using APT. Whereas challenges and solutions for sample preparation linked to the limited fin dimensions already have been reported before, we report here an approach to prepare fin structures for APT, which based on their processing history (trenches filled with Si) are in principle invisible in FIB and SEM. Hence alternative solutions in locating and positioning them on the APT-tip are presented. We also report on the use of the atom probe results on FinFETs to understand the role of different dopant implantation angles (10° and 45°) when attempting conformal doping of FinFETs and provide a quantitative comparison with alternative approaches such as 1D secondary ion mass spectrometry (SIMS) and theoretical model values.     

The effect of electrical head-only stun duration on electroencephalographic-measured seizure and brain amino acid neurotransmitter release

Effective electrical head-only stunning produces a seizure-like state followed by a period of analgesia seen in animals allowed to recover. Passing of a 1·0 A current (50 Hz, 500 V) for less than 0·2 s, through the head of a sheep does not produce a seizure-like state as evidenced by recorded electroencephalogram. Corresponding to this lack of seizure-like state, the release of the neurotransmitters glutamate and aspartate, in the brain, occurs to levels associated with arousal rather than seizure. At a duration of 0·2 s, the same stun parameters as above produce a seizure-like state and the release of glutamate and aspartate rises dramatically. The length of the seizure-like state, and the levels of release of glutamate, aspartate and a third neurotransmitter gamma amino-4-butyric acid (GABA), increased with stun duration until 4·0 s duration, where a peak in these parameters was seen. Stun durations of 2·0, 4·0, 8·0 and 12·0 s all produce similar effects. At a duration of 20 s, however, the length of the seizure-like state and the release of neurotransmitters is less than at shorter stun durations. For welfare purposes a head-only electrical stun, of 1·0 A, at a duration as low as 0·2 s produces unconsciousness and analgesia to subsequent slaughter procedures. However, maximum welfare benefits appear attainable at durations between 2·0 and 20·0 s.     

Homopolymer Nanolithography

Future progress in nanoscience and nanotechnology necessitates further development of versatile, labor‐, and cost‐efficient surface patterning strategies. A new approach to nanopatterning is reported, which utilizes surface segregation of a smooth layer of an end‐grafted homopolymer in a poor solvent. The variation in polymer grafting density yields a range of surface nanostructures, including randomly organized pinned spherical micelles, worm‐like structures, networks, and porous films. The capability to use the polymer patterns for site‐specific deposition of small molecules, polymers, or nanoparticles is shown. This versatile strategy enables patterning of curved surfaces with direct access to the substrate and no need in changing polymer composition to realize different surface patterns.     

Paramagnetic 1H-NMR relaxation probes of stereoselectivity in metalloporphyrin catalyzed olefin epoxidation

Enantioselective catalytic epoxidation of olefins is an important problem from both practical and mechanistic points of view. The origins of chiral induction by asymmetric porphyrin and salen complexes were investigated by FT-NMR T1 relaxation techniques. A new chiral vaulted porphyrin (1) that carries (S)-binaphthyl-L-alanine straps across both faces of the porphyrin macrocycle was synthesized and characterized. (R)-styrene oxide was obtained in > 90% ee in the initial stages of styrene epoxidation with F5PhIO catalyzed by 1-Fe(III)Cl. The transition state for olefin epoxidation with high-valent metal-oxo species was modeled by coordinating epoxides to paramagnetic copper complexes of the corresponding ligands. The epoxide enantiomer that better fit the chiral cavity of the catalyst, as revealed by T1 relaxation measurements, was also the major product of catalytic olefin epoxidation. These results are consistent with the "lock-and-key" mechanism of asymmetric catalysis by metalloporphyrins. The copper complex of a chiral salen ligand showed no differentiation in terms of T1 relaxation rates between the enantiomers of cis-beta-methylstyrene oxide in contrast to the high enantioselectivity observed for catalytic epoxidation.     

Multidimensionality of oral health in dentate adults

OBJECTIVES: An understanding of the validity and usefulness of self-reported measures (as distinct from clinically determined measures) of oral health is emerging. These self-reported measures include self-rated oral health (SROH). Three objectives were to: (1) describe self-rated oral health in dentate adults, (2) quantify associations between self-rated oral health and other measures of oral health (oral disease and tissue damage, pain and discomfort, functional limitation, and disadvantage), and (3) assess the construct validity of a model of oral health proposed herein. METHODS: The Florida Dental Care Study is a longitudinal study of oral health, which included at baseline 873 subjects who had at least one tooth, were 45 years or older, and who participated for an interview and clinical examination. RESULTS: The prevalence of self-rated oral health decrements was substantial; approximately one fourth of subjects reported their oral health as only fair or poor. Bivariate and multivariate results provided consistent evidence of the construct validity of the proposed model of oral health. Additionally, the salience of one measure of dental appearance suggests that persons may use esthetic cues when rating their oral health. CONCLUSIONS: The proposed multidimensional model of oral health has construct validity. Self-rated oral health is affected by oral disease and tissue damage, oral pain and discomfort, oral functional limitation, and oral disadvantage. These self-reported measures and the proposed model should provide useful information for dental care effectiveness research. General health status has been disaggregated into the "physical" and the "mental;" an additional separation into the "oral" aspects of health seems warranted.