Effect of the compatibilizer content on the quasi‐static and low velocity impact responses of glass woven fabric/polypropylene composites

Glass woven fabric/polypropylene laminates have been studied given their outstanding performance/cost ratio. Their flexural properties, mainly influenced by the adhesion between matrix and reinforcing fibers, have been investigated for systems containing maleated polypropylene (PP‐g‐MA) amounts ranging from 0% to 10% by weight. Results have shown that the presence of the compatibilizer improves both flexural modulus and strength, achieving plateau values approximately for 5 and 2 wt% of PP‐g‐MA, respectively. On the contrary, an inverse proportion between the compatibilizer content and the energy dissipated at perforation emerged from low velocity impact tests. The different dependence can be related to the failure mechanisms occurring at the fiber/matrix interface. These mechanisms are able to dissipate large amounts of energy through friction phenomena, and are pronounced when the fiber/matrix adhesion is weak. Pull‐out of fibers from the matrix has been detected, in particular, in systems containing low contents of compatibilizer and evidenced by the morphological analysis of fracture surfaces after failure. The large amount of energy dissipation allowed by the relative motion of fibers and matrix occurred before fiber breakage, as confirmed by the evaluation of the laminates ductility index. POLYM. COMPOS., 37:2452–2459, 2016. © 2015 Society of Plastics Engineers     

Modeling thermophoretic effects in solid-state nanopores

Local modulation of temperature has emerged as a new mechanism for regulation of molecular transport through nanopores. Predicting the effect of such modulations on nanopore transport requires simulation protocols capable of reproducing non-uniform temperature gradients observed in experiment. Conventional molecular dynamics (MD) method typically employs a single thermostat for maintaining a uniform distribution of temperature in the entire simulation domain, and, therefore, can not model local temperature variations. In this article, we describe a set of simulation protocols that enable modeling of nanopore systems featuring non-uniform distributions of temperature. First, we describe a method to impose a temperature gradient in all-atom MD simulations based on a boundary-driven non-equilibrium MD protocol. Then, we use this method to study the effect of temperature gradient on the distribution of ions in bulk solution (the thermophoretic effect). We show that DNA nucleotides exhibit differential response to the same temperature gradient. Next, we describe a method to directly compute the effective force of a thermal gradient on a prototypical biomolecule—a fragment of double-stranded DNA. Following that, we demonstrate an all-atom MD protocol for modeling thermophoretic effects in solid-state nanopores. We show that local heating of a nanopore volume can be used to regulate the nanopore ionic current. Finally, we show how continuum calculations can be coupled to a coarse-grained model of DNA to study the effect of local temperature modulation on electrophoretic motion of DNA through plasmonic nanopores. The computational methods described in this article are expected to find applications in rational design of temperature-responsive nanopore systems.     

Superhydrophobic SLA 3D printed materials modified with nanoparticles biomimicking the hierarchical structure of a rice leaf

Open in a separate window     

Epidermal cells on stubs used for detection of GSR with SEM-EDX: analysis of DNA polymorphisms

DNA from epidermal cells attached to the adhesive tape of stubs employed to collect and identify gunshot residue (GSR) with scanning electron microscope (SEM) was extracted, amplified with PCR and typed. The method allowed identification of specimens when attribution to a definite person was uncertain. These results also suggest that adhesive tape could be used as a non invasive method for obtaining biological material suitable for DNA analysis from the skin surface.     

The λ-scheme

A scheme for integrating the Euler equations of compressible flow in any hyperbolic case is presented. The scheme relies on the concept of characteristics but is strictly a finite difference scheme. Improvements is accuracy and physical consistence due to the scheme are discussed and results of its application to complex flows are shown.     

Dynamic scheduling of FMS using a real-time genetic algorithm

The paper presents a genetic algorithm capable of generating optimised production plans in flexible manufacturing systems. The ability of the system to generate alternative plans following part-flow changes and unforeseen situations is particularly stressed (dynamic scheduling). Two contrasting objectives represented by the reduction of machine idle-times, thanks to dynamic scheduling computation and the reduction of the makespan, are taken into account by the proposed system. The key-point is the real-time response obtained by an optimised evolutionary strategy capable of minimising the number of genetic operations needed to reach the optimal schedule in complex manufacturing systems.     

GPU-based parallel vertex substitution algorithm for the p-median problem

We introduce a GPU-based parallel vertex substitution (pVS) algorithm for the p-median problem using the CUDA architecture by NVIDIA. pVS is developed based on the best profit search algorithm, an implementation of vertex substitution (VS), that is shown to produce reliable solutions for p-median problems. In our approach, each candidate solution in the entire search space is allocated to a separate thread, rather than dividing the search space into parallel subsets. This strategy maximizes the usage of GPU parallel architecture and results in a significant speedup and robust solution quality. Computationally, pVS reduces the worst case complexity from sequential VS’s O(p · n²) to O(p · (n ? p)) on each thread by parallelizing computational tasks on GPU implementation. We tested the performance of pVS on two sets of numerous test cases (including 40 network instances from OR-lib) and compared the results against a CPU-based sequential VS implementation. Our results show that pVS achieved a speed gain ranging from 10 to 57 times over the traditional VS in all test network instances.     

Synthesis and characterization of mesoporous silica SBA 15 improved the efficacy of CORM-2 against hypoxia reoxygenation injury

Journal of Porous Materials - Carbon monoxide releasing molecule-2 (CORM-2) exhibited protection against cardiac hypoxia reoxygenation injury (H/R). However, its poor water solubility and short...