Metal complexing properties of water-soluble poly(N-maleyl glycine) studied by the liquid-phase polymer-based retention (LPR) technique

Summary The separation of various metal ions by the water-soluble N-maleyl glycine polymer in conjunction with membrane filtration was investigated. The method is based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low-molecular-weight species from the polymer complex formed. It is shown that poly(N-maleyl glycine) can bind several metal ions in aqueous solution at pH 3. At higher pH, the water-soluble polymer can be applied to the separation and preconcentration of many metal ions. In addition, the maximum capacity values of the homopolymer for copper(II) were investigated and compared in the presence of various metal ions at different pHs.     

Renopancreatic transplant. Urologic complications

OBJECTIVE: Retrospective study of urological complications in our series of reno-pancreatic transplants. MATERIAL AND METHODS: Between February 1983 and May 1994 our group has conducted 93 RPT, 80 of which, mean age 36 +/- 6 years (24-54 years), are studied in this paper: 57 male and 23 female with an average time in dialysis of 20 +/- 15 months (0-84 months) and diabetes evolution of 21 +/- 5 years (11-37 years). RESULTS: Actuarial annual survival of patient, renal graft and pancreatic graft has been 85%, 79% and 74% respectively. Haematuria: 25% incidence, with graft pancreatitis etiology in 16 cases, rejection in 8 and urinary fistula in 6. Urinary infection: 85% incidence, symptomatic in 23 patients (29%) and asymptomatic in the remaining cases. Dysuria, urethritis and urethral stenosis: 14 patients, all male, most with both conditions associated. Reconversion of pancreatic exocrine secretion by intestinal route was performed in 7 patients. Urinary fistula: secondary to surgery in 9 cases and rejection in 4. Etiology of one case remained unknown. In 4 cases it was resolved with conservative treatment, and with surgical correction in 8. One patient required pancreatic transplantectomy and one patient died of AMI. CONCLUSIONS: Urological complication in RPT account for a significant morbidity, urinary fistula being the one with greater repercussion on the patient and pancreatic graft survival.     

薄膜磁头磁轭制备工艺研究

本文重点讨论了用不同的工艺方法来制备薄膜磁头中的关键元件-磁轭。采用多次光刻的方法克服湿法工艺中磁性膜NiFe层的侧向钻蚀问题，从而实现对磁轭几何尺寸的精确控制，并对几种工艺方法的优缺点作了比较详细的分析。     

Asymmetric alumina membranes electrochemically formed in oxalic acid solution

Alumina membranes were fabricated by anodizing aluminium metal in 0.15 M oxalic acid. The growth kinetics of the porous layer were investigated in the temperature range –1 to 16 °C using linear potential scans up to 70 V. The faradaic efficiencies of metal oxidation and of porous layer formation, determined by applying Faraday's law, were found to be independent of both temperature and electrical charge. SEM analysis of the metal-side and solution-side surfaces revealed different morphologies. After dissolution of the barrier layer in phosphoric acid, the metal-side surface showed circular pores whose size of about 90 nm was found to be uniform and independent of temperature. The pore population was also practically independent of temperature and a value of about 4 × 10¹³ pores m^–2 was determined. On the solution-side surface the presence of a deposit partially occluding the mouths of pores was observed. This coating could be removed by chemical etching in NaOH or thermal treatment at 870 °C, where decomposition of oxalate occurs. This supports the hypothesis that the deposit consists of an aluminium salt containing oxalate anions precipitated from the solution. The results show that it is possible to control the morphological characteristics of the anodic alumina membranes by careful choice of experimental conditions.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

Multiresidue method for pesticides in drinking water using a graphitized carbon black cartridge extraction and liquid chromatographic analysis

A general liquid-solid extraction procedure for the isolation of pesticides from groundwater and drinking water for high-performance liquid chromatography (HPLC) is presented. This simple and rapid procedure involved passing a 2-L sample through a 250-mg graphitized carbon black (Carbopack B) cartridge at a flow rate of 150-160 mL/min. By taking advantage of the presence of positively charged active centers on the Carbopack B surface, a stepwise elution system allowed the complete separation of base-neutral pesticides from acidic ones. After partial solvent removal, the components in the two fractions were separated and quantified by gradient elution, reversed-phase HPLC with ultraviolet (UV) detection. The performance of the Carbopack cartridge was compared with that of a 500-mg C-18 bonded silica cartridge. With the Carbopack cartridge, the grand mean measurement accuracy of the 35 pesticides considered was 95%. With the C-18 cartridge, the grand mean measurement accuracy of the analytes was 76%. Compared to the C-18 cartridge, additional advantages of using a Carbopack cartridge are that the extraction procedure is about 7 times shorter, no pH adjustment of the environmental sample is necessary for trapping acidic compounds, and one cartridge instead of two suffices to extract base-neutral and acidic pesticides, making the Carbopack cartridge more adaptable than the C-18 one for field use. The detection limits by this method of all the pesticides considered were between 0.003 and 0.07 micrograms/L.     

Global adaptive output feedback controllers with application to non‐linear friction compensation

In this paper, we consider a class of non‐linear systems in which a set of constant parameters is unknown and some state variables are not available for measurement. For such systems we provide a constructive procedure for the solution of the global adaptive tracking problem with dynamic partial state feedback. We illustrate an application of the control strategy to the adaptive non‐linear friction compensation of a DC motor servomechanism. We improve previous results in tow directions: we allow for a subset of the unmeasurable states to enter in a system non‐linearly; we consider systems which are linearly parametrized with respect to a set of unknown constant parameters. Copyright © 2002 John Wiley & Sons, Ltd.     

Primary lymphoma of the breast. Three cases of non-Hodgkin lymphoma

Primary and sole breast lymphoma is a very rare disease. With the review of our series of 616 cases operated on for breast cancer, only 3 cases (0.48%) of primary breast non-Hodgkin lymphoma (LNH) have been observed. The authors outline the problems concerning diagnosis and therapy of this rare disease: pathological and immunohistochemical aspects are discussed. They stress the importance of staging in order to plan a correct multidisciplinary approach.