Understanding the Potential In Vitro Modes of Action of Bis(β-diketonato) Oxovanadium(IV) Complexes

To understand the potential in vitro modes of action of bis(β-diketonato) oxovanadium(IV) complexes, nine compounds of varying functionality have been screened using a range of biological techniques. The antiproliferative activity against a range of cancerous and normal cell lines has been determined, and show these complexes are particularly sensitive against the lung carcinoma cell line, A549. Annexin V (apoptosis) and Caspase-3/7 assays were studied to confirm these complexes induce programmed cell death. While gel electrophoresis was used to determine DNA cleavage activity and production of reactive oxygen species (ROS), the Comet assay was used to determine induced genomic DNA damage. Additionally, Förster resonance energy transfer (FRET)-based DNA melting and fluorescent intercalation displacement assays have been used to determine the interaction of the complexes with double strand (DS) DNA and to establish preferential DNA base-pair binding (AT versus GC).     

Analysis of the electrochemical reaction behavior of alloy AZ91 by EIS technique in H3PO4/KOH buffered K2SO4 solutions

The EIS technique was used to analyze the electrochemical reaction behavior of Alloy AZ91 in H₃PO₄/KOH buffered K₂SO₄ solution at pH 7. The corrosion resistance of Alloy AZ91 was directly related with the stability of Al₂O₃ · xH₂O rich part of the composite oxide/hydroxide layer on the alloy surface. The break down of the oxide layer was estimated to occur mainly on the matrix solid solution phase in Alloy AZ91. The mf capacitive loop arose from the relaxation of mass transport in the solid oxide phase in the presence of Al₂O₃ · xH₂O rich part and from Mg⁺ ion concentration within the broken area in the absence of Al₂O₃ · xH₂O rich part in the composite oxide structure on the alloy surface. The lf inductive loop had tendency of disappear when the dissolution rate of the alloy decreased as a result of the formation of the protective oxide layer.     

Investigating Fatty Acid Composition of Samples were Homogenized Various Meat and Offal Products from Turkey

The aim of the present study was to compare the fatty acid composition, PUFA:SFA ratio, n6/n3 ratio, and TFA of different farm animal meats and offal products. These products were collected at a regional farm in Istanbul which is the most populous city in Turkey. The results of fatty acid composition analysis indicated that the major fatty acids of C16:0 (18.00–29.35 %), C18:0 (4.10–29.71 %), C18:1 (29.21–57.30 %), and C18:2 (1.37–18.60 %) were found in the samples. The total saturated fatty acids, total monounsaturated fatty acids and total polyunsaturated fatty acids content of the samples ranged between 30.00 and 61.83 %, 32.24 and 57.80 %, and 1.64 and 23.60 %, respectively (p < 0.05). Except for turkey abdominal fat, TFA content in all other samples showed a variation between 0.10 and 3.36 %. The PUFA:SFA ratio was higher in turkey meat (0.64) and was lower in sheep kidney fat (0.02). Moreover, the n6/n3 PUFA ratio changed between 2.90 and 22.28 (p < 0.05).     

Effect of an Er,Cr:YSGG laser preparation on dentin bond strength of a universal adhesive

The aim of this study was to evaluate the bond strength of a universal adhesive system to dentin prepared with SiC paper or an Er,Cr:YSGG laser using different bonding strategies (etch-and-rinse versus self-etch mode). Ninety-six extracted caries-free, sound human molars were used. The teeth were longitudinally sectioned in the mesiodistal direction and were wet polished with 600-grit SiC paper to obtain a standardized flat dentin surface. All prepared teeth were randomly divided into two groups, according to the surface preparation method: GroupI:an erbium, chromium:yttrium,scandium, gallium, garnet laser; Group II: silicon carbide paper[SiC] (n = 48). Each group was then assigned into three subgroups according to the universal adhesive’s (Single Bond Universal) bonding strategies: (a) etch-and-rinse mode with phosphoric acid, (b) etch-and-rinse mode with a laser, (c) self-etch mode (n = 16). For surface preparation, the Er,Cr:YSGG laser was used at 3 W, 30 Hz with 140 μs pulse duration for 25 s. For etching mode, the laser was used at 1.5 W (60% air, 70% water). Cylinders of composite were fabricated on the bonding area and shear bond strength was determined using a universal testing machine. Failure modes were evaluated using a stereomicroscope. The data were analyzed using two-way ANOVA followed by the Bonferroni test (p < 0.05). Bonding strategies showed statistically significant differences in both the SiC-and laser-prepared groups (p < 0.05).Universal adhesive used in etch-and-rinse mode with acid showed significantly higher bond strength values than in self-etch mode (p < 0.05). The bond strength values did not differ according to the surface preparation method (p > 0.05). Irrespective of preparation method, using universal adhesive in etch-and-rinse mode with acid might improve dentin bond strength. Laser preparation did not affect the bond strength of the universal adhesive tested.     

Adsorption of malachite green onto bentonite: Equilibrium and kinetic studies and process design

The adsorption of malachite green onto bentonite in a batch adsorber has been studied. The effects of contact time, initial pH and initial dye concentration on the malachite green adsorption by the bentonite have been studied. Malachite green removal was seen to increase with increasing contact time until equilibrium and initial dye concentration, and the adsorption capacity of bentonite was independent of initial pH in the range 3–11. Four kinetic models, the pseudo first- and second-order equations, the Elovich equation and the intraparticle diffusion equation, were selected to follow the adsorption process. Kinetic parameters; rate constants, equilibrium adsorption capacities and correlation coefficients, for each kinetic equation were calculated and discussed. It was shown that the adsorption of malachite green onto bentonite could be described by the pseudo second-order equation. The experimental isotherm data were analyzed using the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich equations. Adsorption of malachite green onto bentonite followed the Langmuir isotherm. The thermodynamic parameters, such as ΔH, ΔS and ΔG, were also determined and evaluated. A single stage batch adsorber was designed for different adsorbent mass/treated effluent volume ratios using the Langmuir isotherm.     

Influence of different outdoor design conditions on design cooling load and design capacities of air conditioning equipments

Outdoor design conditions are important parameters for energy efficiency of buildings. The result of incorrect selection of outdoor design conditions can be dramatic in view of comfort and energy consumption. In this study, the influence of different outdoor design conditions on air conditioning systems is investigated. For this purpose, cooling loads and capacities of air conditioning equipments for a sample building located in Adana, Turkey are calculated using different outdoor design conditions recommended by ASHRAE, the current design data used in Turkey and the daily maximum dry and wet bulb temperatures of July 21st, which is generally accepted as the design day. The cooling coil capacities obtained from the different outdoor design conditions considered in this study are compared with each other. The cost analysis of air conditioning systems is also performed. It is seen that the selection of outdoor design conditions is a very critical step in calculation of the building cooling loads and design capacities of air conditioning equipments.     

Use of consistency index, expert prioritization and direct numerical inputs for generic fuzzy-AHP modeling: A process model for shipping asset management

The aim of this paper is to develop a generic version of the conventional fuzzy-analytic hierarchy process (FAHP) method and investigate the shipping asset management (SAM) problem in the dry bulk shipping market. The recent literature has various applications of the FAHP, but these studies lack consistency control, use identical decision support rather than weighted expert choices, and lack measurable criteria. The proposed model, generic fuzzy-AHP (here after GF-AHP), provides a standard control of consistency on the decision matrix for the expert group. GF-AHP also improves the capabilities of the FAHP by executing direct numerical inputs without expert consultation. In practical business, some of the criteria can be easily calculated and expert consultation is a redundant process. Therefore, GF-AHP presents how to transform such numerical inputs to a priority scale. Finally, expertise differences on the decision group are reflected in the GF-AHP process by an expert weighting algorithm.     

Systematic Understanding of Recent Developments in Bacterial Cellulose Biosynthesis at Genetic,Bioprocess and Product Levels

Engineering biological processes has become a standard approach to produce various commercially valuable chemicals, therapeutics, and biomaterials. Among these products, bacterial cellulose represents major advances to biomedical and healthcare applications. In comparison to properties of plant cellulose, bacterial cellulose (BC) shows distinctive characteristics such as a high purity, high water retention, and biocompatibility. However, low product yield and extensive cultivation times have been the main challenges in the large-scale production of BC. For decades, studies focused on optimization of cellulose production through modification of culturing strategies and conditions. With an increasing demand for BC, researchers are now exploring to improve BC production and functionality at different categories: genetic, bioprocess, and product levels as well as model driven approaches targeting each of these categories. This comprehensive review discusses the progress in BC platforms categorizing the most recent advancements under different research focuses and provides systematic understanding of the progress in BC biosynthesis. The aim of this review is to present the potential of ‘modern genetic engineering tools’ and ‘model-driven approaches’ on improving the yield of BC, altering the properties, and adding new functionality. We also provide insights for the future perspectives and potential approaches to promote BC use in biomedical applications.