Effect of underlap and gate length on device performance of an AlInN/GaN underlap MOSFET

We investigate the performance of an 18 nm gate length AlInN/GaN heterostructure underlap double gate MOSFET, using 2D Sentaurus TCAD simulation. The device uses lattice-matched wideband Al_0.83In_0.17N and narrowband GaN layers, along with high-k Al₂O₃ as the gate dielectric. The device has an ultrathin body and is designed according to the ITRS specifications. The simulation is done using the hydrodynamic model and interface traps are also considered. Due to the large two-dimensional electron gas (2DEG) density and high velocity, the maximal drain current density achieved is very high. Extensive device simulation of the major device performance metrics such as drain induced barrier lowering (DIBL), subthreshold slope (SS), delay, threshold voltage (V_t), I_on/I_off ratio and energy delay product have been done for a wide range of gate and underlap lengths. Encouraging results for delay, I_on, DIBL and energy delay product are obtained. The results indicate that there is a need to optimize the I_off and SS values for specific logic design. The proposed AlInN/GaN heterostructure underlap DG MOSFET shows excellent promise as one of the candidates to substitute currently used MOSFETs for future high speed applications.     

Review and comparative evaluation of symbolic dynamic filtering for detection of anomaly patterns

Symbolic dynamic filtering (SDF) has been recently reported in literature as a pattern recognition tool for early detection of anomalies (i.e., deviations from the nominal behavior) in complex dynamical systems. This paper presents a review of SDF and its performance evaluation relative to other classes of pattern recognition tools, such as Bayesian Filters and Artificial Neural Networks, from the perspectives of: (i) anomaly detection capability, (ii) decision making for failure mitigation and (iii) computational efficiency. The evaluation is based on analysis of time series data generated from a nonlinear active electronic system. This work has been supported in part by the U.S. Army Research Laboratory and the U.S. Army Research Office under Grant No. W911NF-07-1-0376, by the U.S. Office of Naval Research under Grant No. N00014-08-1-380, and by NASA under Cooperative Agreement No. NNX07AK49A.     

An analytical approach to dynamic crosstalk in coupled interconnects

This paper deals with waveform analysis, crosstalk peak and delay estimation of CMOS gate driven capacitively and inductively coupled interconnects. Simultaneously switching inputs for the coupled interconnects are considered. A transmission line-based coupled model of interconnect is used for analysis. Alpha-power Law model of MOS transistor is used to represent the transistors in CMOS driver. Peaks and delays at far-end of victim line are estimated for conditions when the inputs to the two coupled interconnects are switching in-phase and out-of-phase. The comparison of analytically obtained results with SPICE simulations show that the proposed model captures noise peak and their timing; 90% propagation delay; transition time delay and waveform shape with good accuracy, such as not more than 5% error in crosstalk peak estimation.     

Transient analysis of electromagnetic systems with multiple lumped nonlinear loads

A novel method for transient analysis of electromagnetic systems with multiple lumped nonlinear loads is presented. The uniqueness of this approach is that we develop time-domain Green's functions for the multiport linear part of the electromagnetic system by suitably terminating the ports. This ensures a short duration of Green's functions. Hence the amount of frequency-domain data necessary to obtain the time-domain Green's functions is modest. The application of this technique to an arbitrary excitation is just a straightforward convolution. With this technique one can analyze responses of systems with arbitrary nonlinear loads (even with memory) as we have at any time instant Thevenin's equivalent of the linear portion of the electromagnetic system. Examples are presented to illustrate the application of this technique to multiport nonlinearly loaded antennas.     

Studies of microstructural imperfections of powdered Zirconium-based alloys

Different model based approaches of X-ray diffraction line profile analysis have been applied on the heavily deformed zirconium-based alloys in the powdered form to characterize the microstructural parameters like domain size, microstrain and dislocation density. In characterizing the microstructure of the material, these methods are complimentary to each other. Though the parameters obtained by different techniques are differently defined and thus not necessarily comparable, the values of domain size and microstrain obtained from the different techniques show similar trends.     

Optimization of enzymatic process parameters for increased juice yield from carrot (Daucus carota L.) using response surface methodology

The effects of enzyme concentration (50–650 mg/kg grated carrot), pectolytic and cellulolytic enzyme ratio (3:7–7:3), incubation time (30–150 min) and temperature (25–65 °C) on juice recovery and viscosity from grated carrot were studied. A central composite rotatable design (CCRD) was used in designing the treatment combinations of four variables at five levels. The process involved in treating the blanched grated carrot with mixture of crude pectolytic enzyme from Aspergillus foetidus and crude cellulolytic enzyme from Trichoderma ressi, keeping the samples at the desired time, followed by extraction of juice. Enzyme-treated grated carrot sample showed increased juice recovery as compared to control. A second-order response surface model adequately fitted the data. All the variables affected juice recovery and viscosity significantly. Enzyme concentration, pectolytic and cellulolytic enzyme ratio, incubation time and temperature had total and combined effect at linear, square and interactive level on both responses. The optimum condition was enzyme concentration, 210.7 mg/kg of grated carrot; pectolytic and cellulolytic enzyme ratio, 3.84:6.16; incubation time, 130 min and incubation temperature 47 °C. Under the optimal conditions, juice extracted from enzyme-treated grated carrot was 74.3% having juice viscosity 1.07 cP, corresponding to the increase in yield by 13.95% and decrease in viscosity by 0.45 cP.     

In vitro model improves the prediction of soil arsenic bioavailability: worst-case scenario

There is a strong interest in developing an in vitro arsenic (As) model that satisfactorily estimates the variability in in vivo relative oral bioavailability (RBA) measurements. Several in vitro tests have been developed, but none is universally accepted due to their limited success in predicting soil As RBA. A suite of amorphous and crystalline solid As phases were chosen, utilizing a worst-case scenario (WCS) that simulated fasting children's gastric solution chemistry. The objectives of this study were to (i) determine the effects of residence time, pH, and solid-to-solution ratio on As bioaccessibility and speciation in the in vitro gastric test; (ii) provide the fundamental basis for an optimized in vitro model constrained by the WCS; and (iii) validate the optimized in vitro test with the in vivo RBA obtained with BALB/c mice. The gastric pH was the only significant (p < 0.05) factor influencing solid As bioaccessibility. Bioaccessible As retained the oxidation state after its release from the solid into the gastric solution. The optimized in vitro model adequately predicted RBA values for a suite of solid As phases typically encountered in soils, with the exception of aluminum-based solids. This study is an excellent starting point for developing an in vitro test applicable to different As-contaminated soils.     

Optimisation of Bacillus cereus biofilm removal in the dairy industry using an in vitro model of cleaning‐in‐place incorporating serine protease

This article addresses a major hygienic issue in the dairy industry, namely biofilm removal. Response surface methodology was deployed to optimise Bacillus cereus biofilm removal conditions using serine protease. The currently practiced alkali cleaning‐in‐place (CIP) method was also optimised, and while the optimised protease CIP resulted in complete removal of biofilm cells, the reference CIP (with alkali) resulted in a reduction of 4.08 log biofilm cells/cm² and the optimised alkali CIP resulted in a reduction of ～4.92 log biofilm cells/cm². Furthermore, the amount of the biofilm matrix removed in the optimised protease CIP was significantly higher than that of alkali CIP. It was concluded that the optimised protease CIP has better applicability.