Molecular and geographic patterns of tuberculosis transmission after 15 years of directly observed therapy

Stevioside is a sweet-tasting glycoside, composed of stevia, a diterpenic carboxylic alcohol with three glucose molecules, mainly used as a substitute for non-alcoholic sweetener. It has previously been shown to reduce blood pressure in studies in animals and human. The effect of intravenous stevioside on the blood pressure was studied in spontaneously hypertensive rats (SHR). The hypotensive effect on both systolic and diastolic blood pressure was dose-dependent for intravenous doses of 50, 100 and 200 mg/kg in conscious SHR. The maximum reductions in systolic and diastolic blood pressure were 31.4 +/- 4.2% and 40.8 +/- 5.6% (mean +/- SEM) respectively and the hypotensive effect lasted for more than 60 min with a dose of 200 mg/kg. Serum dopamine, norepinephrine and epinephrine levels were not changed significantly 60 min after intravenous injection of stevioside 100 mg/kg in anesthetized SHR. The present data show that stevioside given intravenously to conscious SHR was effective in blood pressure reduction and there was no change in serum catecholamines in anaesthetized animals with this natural compound.     

The association of intra-abdominal infection and abdominal wound dehiscence

Concurrent infection is a risk factor for abdominal wound dehiscence. We reviewed our experience with fascial dehiscence to determine the incidence and to identify prognostic factors for associated intra-abdominal infection. Over a 7-year period, 107 patients with abdominal wound dehiscence were identified. Seventeen were managed nonoperatively, and 90 underwent exploratory laparotomy, 43 of whom had no intra-abdominal pathology and 47 of whom had intra-abdominal infections. Demographic factors, comorbid diseases, and potential indicators of systemic infection did not distinguish patients with intra-abdominal infection from those without. Patients with an intra-abdominal infection were more likely to have undergone an emergency operation (74% vs 48%; P < 0.02), an operation on the colon (55% vs 25%; P < 0.005), or an operation with a higher wound classification (P < 0.02). Mortality was higher in patients with intra-abdominal infection than in those without (44% vs 20%; P < 0.02). Wound dehiscence after emergent operations, and operations with a higher wound classification, especially those involving the colon, should raise concern for intra-abdominal infection. Thorough abdominal exploration should be performed at the time of dehiscence repair. Before nonoperative management is chosen, intra-abdominal infection should be excluded.     

Investigating T Cell Immunity in Cancer: Achievements and Prospects

T cells play a key role in tumour surveillance, both identifying and eliminating transformed cells. However, as tumours become established they form their own suppressive microenvironments capable of shutting down T cell function, and allowing tumours to persist and grow. To further understand the tumour microenvironment, including the interplay between different immune cells and their role in anti-tumour immune responses, a number of studies from mouse models to clinical trials have been performed. In this review, we examine mechanisms utilized by tumour cells to reduce their visibility to CD8⁺ Cytotoxic T lymphocytes (CTL), as well as therapeutic strategies trialled to overcome these tumour-evasion mechanisms. Next, we summarize recent advances in approaches to enhance CAR T cell activity and persistence over the past 10 years, including bispecific CAR T cell design and early evidence of efficacy. Lastly, we examine mechanisms of T cell infiltration and tumour regression, and discuss the strengths and weaknesses of different strategies to investigate T cell function in murine tumour models.     

A formal approach to specifying assembly operations

Experience has proved that exploiting robots for assembly tasks is much more difficult than manufacturing engineers had expected and many attempts at implementing robotic assembly have failed. Our research has led us to believe that a formal approach to specifying the steps required for assembly would be of great benefit in developing the required software for a specific task, and in adaptively controlling and monitoring the execution of robotic assembly steps. The US National Bureau of Standards has developed a formal system, called ABC (for Assembly By Constraints) for specifying the steps required for assembly. The system is based on the reduction in the degrees of freedom of objects as they are assembled. Using this basic concept, we have developed 14 primitive operations which can be used to completely specify assembly steps for a large class of problems. This paper initially outlines the historical development of the system, then describes two pieces of software developed to allow easy definition of assembly tasks using the ABC system, and finally presents two practical examples.     

An experimental investigation into soft-pad grinding of wire-sawn silicon wafers

Silicon is the primary semiconductor material used to fabricate microchips. A series of processes are required to manufacture high-quality silicon wafers. Surface grinding is one of the processes used to flatten wire-sawn wafers. A major issue in grinding of wire-sawn wafers is reduction and elimination of wire-sawing induced waviness. Results of finite element analysis have shown that soft-pad grinding is very effective in reducing the waviness. This paper presents an experimental investigation into soft-pad grinding of wire-sawn silicon wafers. Wire-sawn wafers from a same silicon ingot were used for the study to ensure that these wafers have similar waviness. These wafers were ground using two different soft pads. As a comparison, some wafers were also ground on a rigid chuck. Effectiveness of soft-pad grinding in removing waviness has been clearly demonstrated.     

Potassium channels: a computer prediction of structure and selectivity

Model structures for the pore of the potassium channels Shakerand ROMK1 are predicted. The models arise from computer simulationsand suggest reasons for the striking selectivity of these channelsfor K+ and the blocking of ROMK1 by internal Mg²⁺. The modelledstructure of the Shaker pore is supported by mutagenesis data.The mutagenesis experiments indicate the side chains responsiblefor binding to blocking agents [tetraethylammonium (TEA) andcharybdotoxin (CTX)] and the model has these side chains suitablyoriented for binding. An aromatic K+ binding site part way downthe pore is also predicted by the Shaker pore model.     

Promotion of the NO + O2 Reaction by Ba–Y, FAU Zeolite at 25 °C

A remarkably high inferred initial rate of NO oxidation by O₂ has been observed over Ba–Y, FAU zeolite at 25 °C in simple flow-reactor experiments. The rate of reaction at steady state was found to be lower, but still an order of magnitude greater than over alumina-supported Pt, also at 25 °C.     

Solvent-free oxidation of benzyl alcohol with oxygen using zeolite-supported Au and Au–Pd catalysts

The oxidation of benzyl alcohol to benzaldehyde has been investigated in the absence of solvent using zeolite-supported Au and Au–Pd catalysts. Three zeolites were investigated, ZSM-5, zeolite β and zeolite Y, and these were contrasted with the titanoslicalite TS-1 and TiO₂ as supports. For the Au catalysts the best results are obtained with zeolite β as the support and the conversions were comparable or better than those observed with TiO₂ in terms of turn over frequencies. However, the selectivities observed with the acidic zeolites were lower than the non-acidic TS-1 and TiO₂. This is due to the subsequent reaction of benzaldehyde via acid catalysed reactions to give benzyl benzoate and its dibenzyl acetal, and, in some cases dibenzylether. Initial catalysts were evaluated with a gold loading of 2 wt% and increasing this to 4 wt% showed the expected increase in activity, indicating that there is scope to improve the performance of these catalysts. The most active catalysts were prepared by impregnation and catalysts prepared by deposition precipitation were considerably less active. Introduction of Pd into the catalyst improved the activity without significantly affecting the selectivity.     

Effect of plasticizers on the thermal decomposition of chlorinated polyvinylchloride

Plasticized samples of chlorinated polyvinylchloride (CPVC) were investigated by using thermogravimetric (TG) analysis and differential scanning calorimetry (DSC). Three different plasticizers were studied, namely, dioctyl phthalate (DOP), alkyldiaryl phosphate ester (Santiciser 2148), and triaryl phosphate ester (Reofos 50). TG experiments in nitrogen showed one major decomposition stage, involving dehydrochlorination, and minor pyrolysis reaction of the hydrocarbon residue. In contrast to the three stages previously reported to occur in the nonplasticized‐stabilized CPVC, TG analyses in air showed two distinctive decomposition stages for the plasticized CPVC samples. The DOP system provided a suggestion of a third stage. The first decomposition stage was due not only to the loss of all the chlorine present, but also to loss of the plasticizer or its decomposition products. The second decomposition stage was mostly due to char oxidation, the char being formed almost exclusively from the DCE and VDC units in CPVC polymer. DSC results showed that in the presence of nitrogen, there was no significant plasticizer effect on the thermal decomposition behavior of CPVC up to about 330°C, while in air the DSC traces also show no significant differences below 400°C. The two phosphate plasticizers showed no significant differences in their effect on the thermal decomposition behavior of CPVC under the same experimental conditions. It is believed that P₂O₅ and polyphosphoric acid are among the main constituents of the residua. These would impart a protective glassy surface to the char. This will facilitate effective flame retardant action. This preliminary conclusion is based on the premise that the more stable the char layers are, the more resilient will be the protective layer, and consequently, the better the flame retardant effect. J. VINYL ADDIT. TECHNOL., 11:21–27, 2005. © 2005 Society of Plastics Engineers