Predictive modelling of the 3-D structure of interleukin-13

Several atomic structures are now available for the family ofhelical cytokines, which includes growth hormone as well asmany of the interleukins. Using structural information fromfive members of this family, two alternative models of interleukin(IL)-13 are proposed. IL-13 has biological properties similarto those of IL-4 and, like the other interleukins, is a potentiallyimportant pharmaceutical target. The model of IL-13 is discussedand compared with the known interleukin structures.     

Comparison of supports for the direct synthesis of hydrogen peroxide from H2 and O2 using Au–Pd catalysts

The direct synthesis of hydrogen peroxide from H₂ and O₂ using a range of supported Au–Pd alloy catalysts is compared for different supports using conditions previously identified as being optimal for hydrogen peroxide synthesis, i.e. low temperature (2 °C) using a water–methanol solvent mixture and short reaction time. Five supports are compared and contrasted, namely Al₂O₃, -Fe₂O₃, TiO₂, SiO₂ and carbon. For all catalysts the addition of Pd to the Au only catalyst increases the rate of hydrogen peroxide synthesis as well as the concentration of hydrogen peroxide formed. Of the materials evaluated, the carbon-supported Au–Pd alloy catalysts give the highest reactivity. The results show that the support can have an important influence on the synthesis of hydrogen peroxide from the direct reaction. The effect of the methanol–water solvent is studied in detail for the 2.5 wt% Au–2.5 wt% Pd/TiO₂ catalyst and the ratio of methanol to water is found to have a major effect on the rate of hydrogen peroxide synthesis. The optimum mixture for this solvent system is 80 vol.% methanol with 20 vol.% water. However, the use of water alone is still effective albeit at a decreased rate. The effect of catalyst mass was therefore also investigated for the water and water–methanol solvents and the observed effect on the hydrogen peroxide productivity using water as a solvent is not considered to be due to mass transfer limitations. These results are of importance with respect to the industrial application of these Au–Pd catalysts.     

Performance characteristics of a therapeutic ultrasound wire waveguide apparatus

Therapeutic ultrasound angioplasty has been investigated, clinically, by a number of researchers and represents a potentially promising therapy for the treatment of atherosclerotic lesions. To date, there has been no detailed analysis of the effect of mechanical design parameters, such as wire geometry or damping characteristics, on wire waveguide performance. An apparatus capable of delivering therapeutic ultrasound down small diameter nickel–titanium (NiTi) wire waveguides is described. The output peak-to-peak (p–p) displacements at the distal tip of a 1.0 mm diameter waveguide were measured experimentally, by means of an optical microscope and image analysis software. The output was measured for a range of waveguide lengths from 118 to 303 mm. Wire waveguide distal tip displacements as high as 98 μm (p–p) at 23.5 kHz were measured. For the range of lengths tested, the experimental measurements show the critical relationship between the length of the waveguide and the output distal tip displacements. A finite element model that can predict the resonant frequencies and distal tip displacements of various wire waveguide geometries and configurations, including the effect of damping, is presented. This numerical model has been validated against the experimental displacement data obtained. This will be a valuable design tool for ensuring the safety and effectiveness of therapeutic ultrasound angioplasty procedures.     

New subscales for the MMPI-2 Social Introversion (Si) scale.

The development of three new content-homogeneous subscales for the revised Minnesota Multiphasic Personality Inventory (MMPI-2; J. N. Butcher et al, 1989) Social Introversion (Si) scale designed to replace the K. Serkownek (1975) subscales, which were not included in the revised MMPI, is described. The subscales, termed Shyness/Self-Consciousness, Social Avoidance, and Self/Other Alienation, were developed with data provided by college students (515 men and 797 women). Data analyses with this and the MMPI-2 normative sample demonstrated that the new subscales independently contribute to the assessment of nearly 90% of the variance in the full Si scale, that they display both convergent and divergent validity, and that these attributes generalize beyond the sample with which they were developed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Propane conversion over zeolite catalysts: Comments on the role of Ga

The activation of propane using zeolite H-Y and Ga³⁺ exchanged zeolite Y indicates that in the presence of Ga³⁺ the mechanism of propane activation is changed from a cracking pathway to a dehydrogenation pathway. The presence of both Ga³⁺ and H⁺ are required to achieve this effect.     

Application of degradation kinetics to the rheology of poly(hydroxyalkanoates)

The time‐dependent rheological behavior of a series of 3‐hydroxybuytrate‐based semicrystalline copolymers is employed to determine the expected rheological curves that would be generated in the absence of any polymer degradation. Both dynamic frequency sweep and shear rate sweep experiments were analyzed. A model for the degradation kinetics, coupled with standard rheological relationships, was employed to extrapolate the measured sweeps to predicted curves at time zero, prior to degradation. The model is broadly applicable over a wide range of frequencies or shear rates, and generates a single degradation rate constant k for each polymer studied. A similar, although ad hoc, procedure was applied to the dynamic storage and loss moduli. The model provides a method for determining the rheological behavior of degrading polymers over a time interval, typically found in processing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1794–1802, 2006     

Intraperitoneal rupture of ectopic varices--a rare complication of portal hypertension

A 50 year old man presented with sudden abdominal pain, abdominal distension and shock. At emergency laparotomy a large amount of blood was found in the peritoneal cavity. There was micronodular cirrhosis of the liver and the spleen was enlarged. The bleeding was traced to distended veins in the right paracolic gutter which were oversewn and the abdomen closed. A coagulopathy was diagnosed and treatment including high dose aprotinin commenced. However, he continued to bleed and at a second laparotomy the area of previous haemorrhage was packed. Further deterioration continued until death 12 hours later. Intraperitoneal haemorrhage from ectopic varices is a rare occurrence. There is a high mortality rate usually due to an advanced coagulopathy. This is the first report of aprotinin being used in an attempt to treat this. On the basis of this report aprotinin would not seem to be of benefit for this condition.     

Benchmarking of electricity networks: Practical problems with its use for regulation

Benchmarking is a technique derived for management purposes, intended to identify outliers in any population as possible problems for resolution. Several regulatory agencies have tried to use benchmarking to define the degree of inefficiency of regulated companies, by reference to some target or frontier. This paper identifies the main problem inherent in trying to adapt a management technique to a regulatory purpose – namely that it requires the exercise of subjective judgements. The resulting lack of predictability and objectivity is not conducive to the provision of efficient regulatory incentives.This paper explains where subjective judgement enters into regulatory applications of benchmarking, which is not always apparent. The choice of model and selection of data sets are two obvious areas, but the main problem arises over the assumption that any costs not explained by the model must be due to inefficiency. Such assumptions are simply unsupported by evidence and lead to cost targets (or cost reduction targets defined over several years) that are little better than subjective guesses. There are other, superior ways to set cost reduction targets, based on long-term trends in total factor productivity for the regulated sector, which are used in the US and in other countries. However, some regulators feel obliged to use benchmarking and the paper concludes with recommendations as to how benchmarking should support further and more objective investigations into the costs of regulated utilities.     

New energy transfer dyes for DNA sequencing

We have synthesized a set of four energy transfer dyes and demonstrated their use in automated DNA sequencing. The donor dyes are the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein and the acceptor dyes are a novel set of four 4,7-dichloro-substituted rhodamine dyes which have narrower emission spectra than the standard, unsubstituted rhodamines. A rigid amino acid linker, 4-aminomethylbenzoic acid, was used to separate the dyes. The brightness of each dye in an automated sequencing instrument equipped with a dual line argon ion laser (488 and 514 nm excitation) was 2-2.5 times greater than the standard dye-primers with a 2 times reduction in multicomponent noise. The overall improvement in signal-to-noise was 4- to 5-fold. The utility of the new dye set was demonstrated by sequencing of a BAC DNA with an 80 kb insert. Measurement of the extinction coefficients and the relative quantum yields of the dichlororhodamine components of the energy transfer dyes showed their values were reduced by 20-25% compared with the dichlororhodamine dyes alone.