脉冲波形对流化床性能的影响

本文从理论上分析了矩形波和正弦脉波气流对流化床操作性能的影响，发现矩形波在一定条件下优于正弦波的规律，并用实际进行了验证。     

一般应力比时焊接结构S－N曲线的预测方法

本文考虑了焊接结构的几何形状、受载形式、应力比、残余应力、尺寸效应以及材料等因素对疲劳寿命的影响，利用Ｐｅｔｅｒｓｏｎ公式和极值疲劳切口系数概念，建立了一般应力比时焊接结构Ｓ－Ｎ曲线的预估模型．文中对几类典型的焊接结构的Ｓ－Ｎ曲线进行了预测，预测值与实验结果符合较好．本文方法可以大量减少疲劳实验，具有一定的工程实用价值．     

显像管发射小的跟踪分析

本文对黑白显像管发射小进行了跟踪分析，认为阴极涂层脱落和管内真空度不良是导致显像管发射小的主要原因。     

步进电机细分及其在光电测径系统中的应用

叙述了步进电机的细分技术及其测长原理。作为一种测长手段应用于工件直径测量系统中，为提高步进电机细分测长的精度，系统采用了软件补偿的办法，应用光电定位和ＭＣＳ—５１单片机实施控制，构成一种测量范围在１～１００ｍｍ，精度较高，效费比高的光电测径系统。     

Characteristics of aperture coupled microstrip antennas withvarious radiating patches and coupling apertures

A full wave moment method is applied to the analysis of aperture coupled microstrip antennas, in which all components of the electric and equivalent magnetic surface currents are considered. The electric current distributions on the rectangular patch for different coupling aperture positions are presented with their radiation patterns. The effects of the coupling aperture shape and size on the input impedance and radiation performance are also discussed. As an example of new radiators, slotted patches are studied, and it is shown that they can be used to achieve dual-frequency operation     

MIS型单晶硅液晶光阀

详细介绍了一种新颖、快速响应的金属－绝缘层－半导体构成的MIS型单晶硅液晶光阀的结构、工作机理、制作工艺和性能参数测试。液晶采用45°扭曲向列型混合场效应工作模式。所得到的光阀的极限分辨率为40lp／mm，口径40mm，最大对比度＞100：1，在930nm（△λ＝40nm）写入光灵敏度为20μW／cm2，响应时间为15ms。报道了该光阀在大屏幕投影显示中的应用。     

超声波对化学镀Ni－Cr－P非晶态薄膜的金刚石性能的影响

研究了超声波对化学镀Ｎｉ－Ｃｒ－Ｐ非晶态薄膜的金刚石性能的影响。结果表明，超声波可使金刚石表面非晶态薄膜更加均匀和致密，从而提高了抗压强度，氧化温度和晶化后的强度。随超声波频率的增加，金刚石性能有增加的趋势。     

Boundary formulations for shape sensitivity of temperature dependent conductivity problems

Used in concert with the Kirchhoff transformation, implicit differentiation of the discretized boundary integral equations governing the conduction of heat in solids with temperature dependent thermal conductivity is shown to generate an accurate and economical approach for computation of shape sensitivities. For problems with specified temperature and heat flux boundary conditions, a linear problem results for both the analysis and sensitivity analysis. In problems with either convection or radiation boundary conditions, a non-linear problem is generated. Several iterative strategies are presented for the solution of the resulting sets of non-linear equations and the computational performances examined in detail. Multi-zone analysis and zone condensation strategies are demonstrated to provide substantive computational economies in this process for models with either localized non-iinear boundary conditions or regions of geometric insensitivity to design variables. A series of non-linear example problems is presented that have closed form solutions. Exact anaytical expressions tor the shape sensitivities associated with these problems are developed and these are compared with the sensitivities computed using the boundary element formulation.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

具有势垒增强层的MSM光电探测器暗电流的计算

将具有完全晶格匹配势垒增强层的MSM－PD简化为一维模型，并通过理论分析，得出了它的暗电流特性，进一步得到器件暗电流与势垒增强层的关系。