数字程控交换机与专网中的多媒体通信

本文以一个多媒体通信应用VISIT为实例,介绍了多媒体通信在数字程控交换机及专网中的应用情况。     

目标机动规范模型研究

分析和总结了飞机各种机动动作的内在因素,提出了目标机动规范模型,研究了模型的数学描述方式、控制参量的相互约束关系及其组织形式,并通过模拟导弹对目标的攻击过程对模型进行了验证。     

Medical imaging research on idiopathic hemifacial spasm

In order to have a medical imaging examination for idiopathic hemifacial spasm before surgery, we designed a new method by using vertebroarterial DSA and vertebroarterial CTA based on an aired cisternapontis, 36 patients were examined since 1989 and the compression of the facial nerve from brain stem to porus acousticus internus was showed clearly in all the cases. The arteries responsible for the compression were cerebellar inferior posterior (55.6%), cerebellar inferior anterior (44.4%), auditory internus (25.0%) and vertebroarterial (11.1%), 36% of all the cases had more than one responsible arteries, 22.2% cases had only one compression point, 38.9% had two points, 25.0% had 3 and 13.9% had more. 85.7% of the compression points located in the root zone and 14.3% near the porus acousticus internus. 24 cases were treated with decompression surgery, it indicated that the compression conditions just met the medical imaging examinationg results. After surgery the symptom disappeared in 23 cases and remarkably released in one case with no death case. We believed that this method might be helpful to idiopathic hemifacial spasm decompression surgery and other surgeries in the CP angle.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

正义峡坝址基础岩体灌浆质量检测

采用声波测井、地震CT等综合物探方法 ,对正义峡水库坝址基础岩体固结灌浆质量进行检测 ,基本查明了坝基岩体固结灌浆后的质量状况 ,取得了良好的应用效果     

工业用水中硅酸根离子分析技术的现状与发展

综述了工业用水中硅酸根离子的基本分析方法以及分析仪器的开发应用现状；论述了流动注射分析技术（ＦＩＡ）在工业用水中硅酸根离子分析上的应用并预示了水质分析中在线预富集技术与多组分联合测定技术的发展。     

硅中硼离子注入校准样品的研制

本文主要介绍了硅中硼离子注入校准样品的制备与研究。分别用三台SIMS仪器对样品进行了深度剖析与比对,并对用作校准目的的样品主要参数进行了定值。