Novel supports for nickel-based catalysts for the partial oxidation of methane

Zirconia-supported nickel catalysts with different amounts of aluminum (Al/Zr = 0.2, 1 and 2) were studied in this work in order to find alternative supports for nickel-based catalysts for the partial oxidation of methane. This reaction is a promising route for producing hydrogen and syngas for different applications. Samples were prepared by precipitation and impregnation techniques, characterized by several techniques and evaluated in the partial oxidation of methane in the range of 450–750 °C and 1 atm. It was found that aluminum affects the textural and catalytic properties of zirconia-supported nickel catalysts. The tetragonal phase of zirconia was stabilized by aluminum and gamma-alumina was also found in the aluminum-richest samples. Aluminum increased the porosity and the specific surface area of the solids. The catalytic activity also increased with the amount of aluminum in solids probably due to the stronger interaction of nickel with the support, which slowly generates active sites during the reduction step. The methane conversion and hydrogen selectivity increased with temperature, indicating no deactivation. The hydrogen to carbon monoxide molar ratio decreased due to aluminum but was not significantly affected by temperature. The coke produced was not harmful to the catalysts and aluminum affected its amount, although no simple relationship was found between these parameters. The most promising catalyst was the sample with aluminum to zirconium molar ratio of 2, which showed high activity and hydrogen selectivity and was stable under the reaction condition.     

Synthesis and Characterization of Nanostructured Cerium Dioxide Thin Films Deposited by Ultrasonic Spray Pyrolysis

Nanostructured thin films of cerium dioxide have been prepared on single-crystalline silicon substrates by ultrasonic spray pyrolysis using cerium acetylacetonate as a metal–organic precursor dissolved in anhydrous methanol and acetic acid as an additive. The morphology, structure, optical index, and electrical properties were studied by X-ray diffraction, scanning electron microscopy, atomic force microscopy, ellipsometry, and impedance spectroscopy. The use of additives is very important to obtain crack-free films. The substrate temperature and flow rate was optimized for obtaining smooth ( R _a<0.4 nm), dense ( n >2), and homogeneous nanocrystalline films with grain sizes as small as 10 nm. The influence of thermal annealing on the structural properties of films was studied. The low activation energy calculated for total conductivity (0.133 eV) is attributed to the nanometric size of the grains.     

Performance of Green Solvents in the Extraction of Sunflower Oil from Enzyme-Treated Collets

The main goal of this work is to evaluate the extraction of sunflower oil from enzyme-treated collets using ethanol and isopropanol (IPA) as solvents. The sunflower collets are pretreated with the multienzyme complex Viscozyme L prior to solvent extraction by the Soxhlet method. The influence of the moisture content of the collets, pretreatment, processing time, and solvent type on the amount of total extracted material and the oil extraction efficiency is studied. Some quality parameters such as phospholipid content of the oil and chlorogenic acid content of the residual meal are also analyzed. At low moisture content (7%) the solvents exhibit similar oil extraction ability (98–99%), but with increasing moisture the extraction efficiency of ethanol decreases to about 85%, while no significant differences are observed for IPA. The enzymatic treatment increases the extraction efficiency for all times, especially for ethanol. It is observed that IPA is more efficient in the extraction compared to ethanol, and the amount of nonlipid material is reduced by ≈70%. In addition, the oil extracted with IPA have lower phospholipid content and the residual meal presents a higher chlorogenic acid content. Practical Applications:This work would contribute toward the use of green solvents in the extraction of sunflower oil from collets. Ethanol and isopropanol, used as solvents, present attractive advantages, including low toxicity, good operational security, as well as being obtained from a renewable source. The obtained data provide up-to-date information on the use of these alcohols in the extraction of sunflower oil from collets and the influence of operating conditions, such as moisture content, enzymatic pretreatment of the collets, and the extraction time. Information about oil and meal quality is also reported.     

Validation of a Gas Chromatography-Mass Spectrometry Method for the Measurement of the Redox State Metabolic Ratios Lactate/Pyruvate and β-Hydroxybutyrate/Acetoacetate in Biological Samples

The metabolic ratios lactate/pyruvate and β-hydroxybutyrate/acetoacetate are considered valuable tools to evaluate the in vivo redox cellular state by estimating the free NAD+/NADH in cytoplasm and mitochondria, respectively. The aim of the current study was to validate a gas-chromatography mass spectrometry method for simultaneous determination of the four metabolites in plasma and liver tissue. The procedure included an o-phenylenediamine microwave-assisted derivatization, followed by liquid-liquid extraction with ethyl acetate and silylation with bis(trimethylsilyl)trifluoroacetamide:trimethylchlorosilane 99:1. The calibration curves presented acceptable linearity, with a limit of quantification of 0.001 mM for pyruvate, β-hydroxybutyrate and acetoacetate and of 0.01 mM for lactate. The intra-day and inter-day accuracy and precision were within the European Medicines Agency’s Guideline specifications. No significant differences were observed in the slope coefficient of three-point standard metabolite-spiked curves in plasma or liver and water, and acceptable recoveries were obtained in the metabolite-spiked samples. Applicability of the method was tested in precision-cut liver rat slices and also in HepG2 cells incubated under different experimental conditions challenging the redox state. In conclusion, the validated method presented good sensitivity, specificity and reproducibility in the quantification of lactate/pyruvate and β-hydroxybutyrate/acetate metabolites and may be useful in the evaluation of in vivo redox states.     

Cellular Models for Primary CoQ Deficiency Pathogenesis Study

Primary coenzyme Q₁₀ (CoQ) deficiency includes a heterogeneous group of mitochondrial diseases characterized by low mitochondrial levels of CoQ due to decreased endogenous biosynthesis rate. These diseases respond to CoQ treatment mainly at the early stages of the disease. The advances in the next generation sequencing (NGS) as whole-exome sequencing (WES) and whole-genome sequencing (WGS) have increased the discoveries of mutations in either gene already described to participate in CoQ biosynthesis or new genes also involved in this pathway. However, these technologies usually provide many mutations in genes whose pathogenic effect must be validated. To functionally validate the impact of gene variations in the disease’s onset and progression, different cell models are commonly used. We review here the use of yeast strains for functional complementation of human genes, dermal skin fibroblasts from patients as an excellent tool to demonstrate the biochemical and genetic mechanisms of these diseases and the development of human-induced pluripotent stem cells (hiPSCs) and iPSC-derived organoids for the study of the pathogenesis and treatment approaches.     

Short-term maternal psychological stress in the post-conception period in ewes affects fetal growth and gestation length

Fetal development can be influenced by maternal environment in the peri-conceptional period. This study investigated the effect of maternal feed intake and psychological stress within the first 6 days after conception on embryo development and fetal growth. Superovulated ewes (n=40) were artificially inseminated with semen from one ram. Ewes were then divided into four groups (n=10): group 1 (control) was fed at maintenance level, group 2 (high) at 2x maintenance, and group 3 (low) at 0.5x maintenance on days 2-6 after conception. Group 4 (stress) was fed at maintenance level and then an intense physical and psychological stress challenge was applied for 1 h only on days 2 and 3 after conception. Embryos were recovered at day 6. A total of 113 transferable grade embryos were transferred singly into synchronized untreated recipients, while the remaining embryos (n=165) were fixed and stained for cell counts. Post-conception maternal stress or feed intake did not alter the cell count or grade of day 6 embryos. Fetuses from the stress group had longer crown-rump lengths at day 30 and longer femur length at day 58. Fetuses from the stressed and high feed groups had greater abdominal circumferences at day 85. Subsequent birth weights were not significantly different. Ewes carrying lambs from the stress treatment had shorter gestation lengths. These results show that short-term perturbations of the post-conception maternal environment have measurable effects on fetal development and gestation length.     

Oil recovery and lecithin production using water degumming sludge of crude soybean oils

BACKGROUND: Wet gums produced during aqueous degumming of crude soybean oils are currently processed to produce lecithin or added to meals to increase their nutritive value for animal feed. Oils occluded in these gums are generally not recovered or processed. In this work, three methods to recover occluded oil and obtain lecithin from wet gums were assayed: direct extraction of oil with cold acetone (Method I), extraction after water elimination under vacuum (Method II) and by solvent partition with hexane/ethanol (Method III). RESULTS: Higher oil yields (up to 588 g kg^?1 of occluded oil) were obtained when water was eliminated before extraction (Methods II and III). No significant differences were observed in lecithin yields between three methods (720–807 g kg^?1 of dried gums). Recovered oils had acidity = 16.7–21.7 g kg^?1 as oleic acid, TOTOX (total oxidation) values ≤ 8.82, unsaponifiable matter = 9.0–12.1 g kg^?1, and Phosphorus = 87–330 mg kg^?1. Lecithins obtained by Methods I, II and III hexane phase had the same purity level (610–691 g of total measured phospholipids kg^?1). CONCLUSIONS: The occluded oil in soybean wet gums can be recovered, with quality and stability indexes compatible with their reinsertion in the productive process, by water elimination and extraction with acetone. Lecithins can be obtained with different phospholipid composition and diverse application fields. Copyright © 2008 Society of Chemical Industry     

Analysis of bacterial community during the fermentation of pulque, a traditional Mexican alcoholic beverage, using a polyphasic approach

In this study, the characterization of the bacterial community present during the fermentation of pulque, a traditional Mexican alcoholic beverage from maguey (Agave), was determined for the first time by a polyphasic approach in which both culture and non-culture dependent methods were utilized. The work included the isolation of lactic acid bacteria (LAB), aerobic mesophiles, and 16S rDNA clone libraries from total DNA extracted from the maguey sap (aguamiel) used as substrate, after inoculation with a sample of previously produced pulque and followed by 6-h fermentation. Microbiological diversity results were correlated with fermentation process parameters such as sucrose, glucose, fructose and fermentation product concentrations. In addition, medium rheological behavior analysis and scanning electron microscopy in aguamiel and during pulque fermentation were also performed. Our results showed that both culture and non-culture dependent approaches allowed the detection of several new and previously reported species within the alpha-, gamma-Proteobacteria and Firmicutes. Bacteria diversity in aguamiel was composed by the heterofermentative Leuconostoc citreum, L. mesenteroides, L. kimchi, the gamma-Proteobacteria Erwinia rhapontici, Enterobacter spp. and Acinetobacter radioresistens. Inoculation with previously fermented pulque incorporated to the system microbiota, homofermentative lactobacilli related to Lactobacillus acidophilus, several alpha-Proteobacteria such as Zymomonas mobilis and Acetobacter malorum, other gamma-Proteobacteria and an important amount of yeasts, creating a starting metabolic diversity composed by homofermentative and heterofermentative LAB, acetic and ethanol producing microorganisms. At the end of the fermentation process, the bacterial diversity was mainly composed by the homofermentative Lactobacillus acidophilus, the heterofermentative L. mesenteroides, Lactococcus lactis subsp. lactis and the alpha-Proteobacteria A. malorum. After a 6-h fermentation, 83.27% of total sugars detected after inoculation were consumed (228.4 mM hexose equivalents) and a carbon (C) recovery of 66.18% in fermentation products was estimated. They were produced 284.4 mM C as ethanol, 71.5 mM C as acetic acid and 19 mM C as lactic acid, demonstrating the presence of homo- and heterofermentative, acetic and alcoholic metabolisms in the final product. It was also found, after hydrolysis, that the exopolysaccharide produced during the fermentation was mainly composed by fructose residues, probably inulin or levan.     

Ranking of refrigerants

Environmental ranking of refrigerants is of need in many instances. The aim is to assess the relative environmental hazard posed by 40 refrigerants, including those used in the past, those presently used, and some proposed substitutes. Ranking is based upon ozone depletion potential, global warming potential, and atmospheric lifetime and is achieved by applying the Hasse diagram technique, a mathematical method that allows us to assess order relationships of chemicals. The refrigerants are divided into 13 classes, of which the chlorofluorocarbons, hydrofluorocarbons, hydrochlorofluorocarbons, hydrofluoroethers, and hydrocarbons contain the largest number of single substances. The dominance degree, a method for measuring order relationships among classes, is discussed and applied to the 13 refrigerant classes. The results show that some hydrofluoroethers are as problematic as the hydrofluorocarbons. Hydrocarbons and ammonia are the least problematic refrigerants with respect to the three environmental properties.     

Minimization of entropy generation by asymmetric convective cooling

The uniform internal heating of a solid slab and the viscous flow between two parallel walls, are used to illustrate the possibility of minimizing the global entropy generation rate by cooling the external surfaces convectively in an asymmetric way. The known analytic expressions for the temperature field, in the first case, and the velocity and temperature fields, in the second case, are used to calculate the global entropy generation rate explicitly. In dimensionless terms, this function depends on the dimensionless ambient temperature and convective heat transfer coefficients (Biot numbers) of each surface which, in general, are not assumed to be the same. When the Biot numbers for each surface are equal, the entropy generation rate shows a monotonic increase. However, when the Biot numbers are different this function displays a minimum for specific cooling conditions.