Transmission Electron Microscopy-Based Analysis of Electrically Conductive Surface Defects in Large Area GaSb Homoepitaxial Diodes Grown Using Molecular Beam Epitaxy

We investigate a mechanism causing shorting of large area GaSb diodes grown on GaSb substrates using molecular beam epitaxy (MBE). The source of these shorts is determined to be large crystallographic defects on the surface of the diodes that are formed around droplets of gallium ejected from the gallium Knudsen cells during MBE. The gallium droplets cause defects in the crystal structure, and, as the epitaxy continues, the gallium is incorporated into the surrounding material. The shape of the defects is pyramidal with a central void extending from the epi-surface to the gallium core. Processing a GaSb diode with these surface defects results in the top-side contact metal migrating into the defect and shorting the diode. This prevents realization of large area diodes that are critical to applications such as photovoltaics and detectors. The diodes in this study are electrically characterized and the defect formation mechanism is investigated using cross-section transmission electron microscopy and electron dispersive spectroscopy.     

LFMTCN: A Green Ultra-Dense Multi-tier Small Cell Network Using Leader–follower Strategy

Wireless Personal Communications - Design of energy and spectrum-efficient multi-tier small cell network is an emerging research area. This paper has addressed the challenges of power optimization...     

Failure analysis of air pre-heater tubes of a petrochemicals plant

Heat resistant alloy tubes used in the higher temperature range of 1150–1273 K depends on the protective scale integrity for prevention of corrosion induced premature failures in a mixed gas environment with potential corrodents for oxidation, carburization and sulphidation attack. Cast HK40+Nb alloy tubes of an air pre-heater unit of a petrochemical industry failed prematurely after 13,000 h in service. The unit used smoke gas containing gaseous corrodents that could cause oxidation/sulphidation/carburization type of attack. Failed parts showed crack/punctures below the corrosion product filled pits. The crack occurred in the fully carburized zone present at the thinned out centre of the pit. Factors like excessive temperature cycling, overheating, presence of impurities either in the pre-heating gas mixture or that got introduced while in operation were found to be the reasons for breach of protective scale integrity leading to unwarranted corrosion attack resulting in thinning of tube material and internal corrosion penetration which finally led to premature failure.     

Bootstrapping a weighted linear estimator of the ARCH parameters

Abstract.  A standard assumption while deriving the asymptotic distribution of the quasi maximum likelihood estimator in ARCH models is that all ARCH parameters must be strictly positive. This assumption is also crucial in deriving the limit distribution of appropriate linear estimators (LE). We propose a weighted linear estimator (WLE) of the ARCH parameters in the classical ARCH model and show that its limit distribution is multivariate normal even when some of the ARCH coefficients are zero. The asymptotic dispersion matrix involves unknown quantities. We consider appropriate bootstrapped version of this WLE and prove that it is asymptotically valid in the sense that the bootstrapped distribution (given the data) is a consistent estimate (in probability) of the distribution of the WLE. Although we do not show theoretically that the bootstrap outperforms the normal approximation, our simulations demonstrate that it yields better approximations than the limiting normal.     

Fungal biotechnology in food and feed processing

Fungi are of excellent value nutritionally, and of great importance to vegetarians. Edible mushrooms are excellent sources of protein, have low-fat content and are free of cholesterol. They are easily cultivable and are consumed either in fresh or processed form. Yeasts and filamentous fungi secrete a plethora of important enzymes in the growth medium together with other secondary metabolites. Most of these are hydrolytic in nature being employed in different food processing industries as well as in refinement of fodder quality. Edible filamentous fungi producing these enzymes present an added advantage for their use in food and feed. In this article these aspects will be discussed along with the results from edible mushroom Termitomyces clypeatus, producing a wide variety of hydrolytic enzymes and products, from our laboratory. It is likely that the functional understanding of different enzyme classes will provide new applications within the food industry in the future.     

Programmable memory in organic field-effect transistor based on lead phthalocyanine

A nonvolatile organic field-effect transistor (OFET) with a polymeric electret as gate insulator and spun cast film of lead phthalocyanine (PbPc) as semiconductor channel is reported. Hysteresis induced by gate–bias stress was exploited to study nonvolatile memory effects. The observation of the hysteresis and memory window is proposed to originate from charge storage in the polymeric electret. The on state retention time for the OFET memory device is more than 5 h and the device can reproduce continuous write–read–erase–read switching cycles.     

Swelling behaviour of a geofiber-reinforced expansive soil

This paper reports the results of laboratory study performed on expansive soil reinforced with geofibers and demonstrates that discrete and randomly distributed geofibers are useful in restraining the swelling tendency of expansive soils. Swelling characteristics of remoulded expansive soil specimens reinforced with varying fiber content (f = 0.25% and 0.50%) and aspect ratio (l/b = 15, 30 and 45) were studied. One-dimensional swell-consolidation tests were conducted on oedometer specimens. Reduction in heave and swelling pressure was the maximum at low aspect ratios at both the fiber contents of 0.25% and 0.50%. Finally, the mechanism by which discrete and randomly distributed fibers restrain swelling of expansive soil is explained with the help of soil–fiber interaction.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

An apparatus for quantitative measurement of interparticulate friction in a non-compacted powder mass

This paper describes a new test apparatus developed for measuring interparticulate friction. The results obtained using this apparatus are compared with Hausner ratio as well as the angle of repose results made on identical powders and under identical environmental conditions. The resistance to flow of a mass of uncompacted power is determined by measuring the torque needed to prevent the rotation of a vane shaft embedded in the powder while the powder column is rotated at a constant speed. The vane shaft, located at the center of the apparatus, is coupled to a load cell and the force developed is recorded on a strip chart. The load cell is capable of measuring forces up to 500 gf with a limit of resolution of about 0.5 gf. Results obtained for a number of different particulate materials are presented.     

Elongation of (n−9) and (n−7)cis-monounsaturated and saturated fatty acids in seeds ofsinapis alba

Lipids in developing seeds ofSinapis alba contain appreciable proportions of (n−7)octadecenoic (vaccenic) acid besides its (n−9) isomer (oleic acid), whereas the constituent very long chain (>C₁₈) monounsaturated fatty acids of these lipids are overwhelmingly composed of the (n−9) isomers. Cotyledons of developingSinapis alba seed use [1-¹⁴C]acetate, [1-¹⁴C]malonate or [1,3-¹⁴C]malonyl-CoA for de novo synthesis of palmitic, stearic and oleic acids and for elongation of preformed oleic, vaccenic and stearic acids to their higher (n−9), (n−7) and saturated homologs, respectively. Moreover, elongation of preformed (n−7)palmitoleic acid to vaccenic acid is observed. Stepwise C₂-additions to preformed oleoyl-CoA by acetyl-CoA or malonyl-CoA yielding (n−9)icosenoyl-CoA, (n−9)docosenoyl-CoA and (n−9)tetracosenoyl-CoA are by far the most predominant reactions catalyzed by the elongase system, which seems to have a preference for oleoyl-CoA over vaccenoyl-CoA as the primer. The pattern of¹⁴C-labeling of the very long chain fatty acids formed from either acetate or malonate shows a close analogy in the mode of elongation of monounsaturated and saturated fatty acids.