OPTIMAL DESIGN AND PERFORMANCE OF SPIRAL WOUND MODULES I: NUMERICAL METHOD

A numerical method has been developed for the performance prediction of spiral wound modules with constant and tapered permeate spacers, It takes into account the pressure drop in the brine and permeate channels and makes use of a three parameter model for the mass transfer through the membrane. For a given application and operating conditions, optimum geometrical characteristics of modules can be found. Tapering the permeate spacer the specific permeation rate can be increased by 10-30%, the wider the membrane the higher the value.     

Anaerobic fermentation of xylose by pichia stipitis: The effect of forced cycling of ph

Xylose fermentation by Pichia stipitis was examined using a two-stage batch process. The cells were first grown aerobically on D-xylose (5 g/L), whereafter additional xylose (10 g/L) was added and fermented during anaerobic conditions (T=30°C). The optimum pH value for a fermentation with constant pH was found to be 4.5 (maximum specific ethanol production rate 0.21 g/(g h). Forced square wave cycling of the pH between 4 and 5, and 3.5 and 5.5 (cycle time 30 min) during the fermentation stage resulted in a fermentation rate lower than the maximum rate, but with unchanged ethanol yields.     

Lipase-catalyzed transesterification of phosphatidylcholine at controlled water activity

The incorporation of a free fatty acid into thesn-1 position of phosphatidylcholine by lipase-catalyzed transesterification was investigated. The thermodynamic water activity of both the enzyme preparation and the substrate solution was adjusted to the same value prior to the reaction. The reaction rate increased with increasing water activity but the yield of modified phosphatidylcholine decreased due to hydrolysis. By using a large excess of the free fatty acid (heptadecanoic acid), the hydrolysis reaction was slowed down, so a higher yield was obtained at a given degree of incorporation. The best results were obtained withRhizopus arrhizus lipase immobilized by adsorption on a polypropylene support. With this preparation, a yield of 60% and nearly 50% incorporation of heptadecanoic acid (100% incorporation in thesn-1 position) was obtained at a water activity of 0.064. The enzyme preparation had good operational stability and position specificity. Little incorporation (<1%) was observed in thesn-2 position, when almost all the fatty acid in thesn-1 position was exchanged.     

Acyl exchange between oleoyl-CoA and phosphatidylcholine in microsomes of developing soya bean cotyledons and its role in fatty acid desaturation

Microsomes of developing soya bean cotyledons transfer oleate from oleoyl-CoA to phosphatidylcholine (PC) by two different mechanisms: one in which oleate transfer is accompanied by the release of free CoA and another which results in the exchange of oleate from oleoyl-CoA for unsaturated 18-carbon fatty acids of PC. The acyl exchange can be demonstrated only when bovine serum albumin is present in the incubation medium. ATP-dependent acyl-CoA synthetase is not involved in the exchange process, which apparently does not require any cofactors. In light of this exchange process, the oleate desaturase system was reinvestigated in order to determine what the actual substrate for this system is. Upon incubation of microsomes with high concentrations of [¹⁴C] oleoyl-CoA, bovine serum albumin and NADH, it could be conclusively demonstrated that most oleic acid is desaturated while part of the PC molecule. The amounts of [¹⁴C] linoleoyl-CoA formed could be explained entirely by the acyl exchange. The physiological significance of the acyl exchange system is discussed. A new method for separation of acyl-CoA from other lipids and free CoA using reversed phase column chromatography also is described.     

Membrane proteins: from sequence to structure

The prediction of protein structure from sequence has been along-standing goal of molecular biology. Integral membrane proteins,once abhorred by protein chemists and crystallographers becauseof their insolubility and stubborn refusal to yield good crystals,now appear to hold great promises for efficient structure predictionand engineering. This is mainly due to the constraints on permissiblestructures imposed by the lipid environment, and to the apparentuncoupling between an initial membrane targeting and insertionprocess which determines the overall topological arrangementof the transmembrane segments and a subsequent –condensation—of these segments into a unique folded state. Recent work suggeststhat the membrane insertion process is controlled by simplesequence elements composed of different combinations of longhydrophobic regions and flanking charged residues. In this reviewwe sketch the most unportant structural rules relating aminoacid sequence to membrane insertion to fully folded molecule,and their use for prediction and protein-engineering purposes.     

Tetranorsesquiterpenoids as Attractants of Yucca Moths to Yucca Flowers

Journal of Chemical Ecology - The obligate pollination mutualism between Yucca and yucca moths is a classical example of coevolution. Oviposition and active pollination by female yucca moths occur...     

A process model for robotic disc grinding

Automation of deburring and cleaning of castings is desirable for many reasons. The major reasons are dangerous working conditions, difficulties in finding workers for cleaning sections, and improved profitability. A suitable robot cell capable of using different tools, such as cup grinders, disc grinders and rotary files, is the solution. This robot should be completed with sensors in order to keep the quality of the cleaned surface at an acceptable level. Although using sensors simplifies both the programming and quality control there are still other problems that need to be solved. These involve selection of machining data, e.g. feeding rate and grinding force in a force controlled operation based on parameters such as tool type, disc grinder and geometry. In order to decrease the programming time, a process model for disc grinders has been developed. This article investigates this process model and pays attention to problems such as wavy or burned surfaces and the effect of a robot's repetition accuracy in the results obtained. Many aspects treated in this article are quite general, and can be applied in other types of grinding operations.     

Effects of carbon content and solidification rate on thermal conductivity of grey cast iron

The thermal conductivity or diffusivity of pearlitic grey irons with various carbon contents is investigated by the laser flash method. The materials are cast in controlled thermal environments and produced in three dissimilar cooling rates. The cooling rate together with the carbon content largely influence the thermal conductivity of grey iron. Linear relationships exist between the thermal conductivity and the carbon content, the carbon equivalent and the fraction of former primary solidified austenite transformed into pearlite. The work shows that optimal thermal transport properties are obtained at medium cooling rates. Equations describing the thermal conductivity of pearlite,solidified as pre-eutectic austenite, and the eutectic of grey iron are derived. The thermal conductivity of pearlitic grey iron is modeled at both room temperature and elevated temperature with good accuracy.     

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

FIB, SEM and STEM/EDX were used to investigate X20 stainless-steel samples exposed to dry O₂, or O₂ containing 40% H₂O, with a flow velocity of 0.5 cm/s or 5 cm/s, for 168 hr or 336 hr at 600°C. Thin protective Cr-rich (Cr,Fe)₂O₃ was maintained on the samples exposed to dry O₂, even after 336 hr, and on the sample exposed to O₂/H₂O mixture with the low-flow velocity (0.5 cm/s) for 168 hr. The oxide scale formed in the latter environment contained less Cr, due to Cr loss through CrO₂(OH)₂ evaporation. Breakaway oxidation occurred on the samples exposed in high-gas-flow velocity for shorter time (168 hr) or in low-gas-flow velocity (0.5 cm/s) for longer time (336 hr). The breakaway scales featured a two-layered structure: an outward-growing oxide “island” consisting of almost pure hematite (α-Fe₂O₃), and an inward-growing oxide “crater” consisting of (Cr,Fe)₃O₄. The transition from a thin protective (Cr,Fe)₂O₃ scale to a non-protective thick scale on this martensitic/ferritic steel originated locally and was followed by rapid oxide growth, resulting in a thick scale that covered the whole sample surface.     

The Inhibitive Effect of Traces of SO2 on the Oxidation of Iron

The oxidation of Fe was investigated at 500–700°C in the presence of O₂ with 0–1000 ppm SO₂. The exposures were carried out in a thermobalance and lasted for 24 h. The oxidized samples were investigated by grazing-angle XRD, SEM/EDX, GDOES and XPS. The rate of oxidation of pure iron is slowed down by traces of O₂ in O₂ below 600°C while SO₂ has no effect on oxidation rate at higher temperatures. Exposure to SO₂<600°C resulted in the formation of small amounts of sulfate at the gas/oxide interface. In addition, sulfur, probably sulfide, accumulated at the metal/oxide interface. The influence of SO₂ on oxidation rate is attributed to surface sulfate. The sulfur distribution in the scale is rationalized in terms of the thermodynamic stability of compounds in the Fe–O–S system. Exposure to SO₂ caused the formation of hematite whiskers.