Recrystallization of phenylbutazone using supercritical fluid antisolvent process

Phenylbutazone was recrystallized from its solutions by using a supercritical fluid antisolvent process. It was dissolved in acetone and supercritical carbon dioxide was injected into the solution, thereby inducing supersaturation and particle formation. Variation in the physical properties of the recrystallized phenylbutazone was investigated as a function of the crystallizing temperature and the carbon dioxide injection rate. The recrystallized particles showed cleaner surfaces and more ordered morphology compared to the particles obtained by other methods such as solvent evaporation. X-ray diffraction patterns indicated that the crystallinity of the particles had been modified upon the recrystallization. Differential scanning calorimetry measurement revealed that the crystallizing temperature influenced the thermal stability of the resulting crystals. Larger crystals were produced when the carbon dioxide injection rate was reduced.     

Preparation of multi-compositional gas sensing films by combinatorial solution deposition

Various compositions of gas sensing films were prepared by the combinatorial deposition of SnO₂, ZnO, and WO₃ sol solutions and their gas sensing behaviors were investigated. The film composition could be manipulated conveniently via the alternate dropping of different oxide sol solutions. From the correlation between film compositions and gas sensitivities, the selective detection of C₂H₅OH and CH₃COCH₃ in the presence of CO, C₃H₈, H₂, and NO₂ could be attained. In addition, the discrimination between C₂H₅OH and CH₃COCH₃, which is a challenging issue due to their similar chemical nature, becomes possible. This research demonstrates the precise design of the sensor-material composition for the selective gas detection via the combinatorial approach.     

Photochemical reduction of molecular weight and number of double bonds in natural rubber film

Natural rubber (NR) can be degraded depending on various factors such as heat, mechanical force, chemical reaction, and light. Light is a very interesting factor because it can cause the NR to degrade under low temperature and pressure. The photo-degradation of NR films was carried out to investigate the effects of the light and the temperature on the reduction of the weight-average molecular weight (Mw) and the double bonds in the NR films. The NR films, with and without catalysts, titanium dioxide (TiO₂), and potassium persulfate (K₂S₂O₈), were exposed to light from a mercury light bulb at 7,000 and 36,000 lux, and at the temperature of 25 °C and 80 °C for 192 hrs. After exposure, the Mw of the NR films was analyzed by gel permeation chromatography (GPC). Changes in the Mw were used to construct a kinetic model for the process, (1/Mw)=(1/Mw₀)+(kt/2M₀) where k is the rate constant, and M₀ is the Mw of the monomer unit. The linear relationship between 1/Mw and time suggested pseudo first-order processes with random scission. The Mw distribution information from the GPC was used to calculate the number of double bonds in the NR films. The trend of the double bonds reduction curves was quite similar to the result obtained from the calculation from the FTIR spectra. This indicated that this calculation method might possibly be another alternative way to obtain the number of double bonds in the NR.     

Self-adjusting the intensity of assortative mating in genetic algorithms

Mate selection plays a crucial role in both natural and artificial systems. While traditional Evolutionary Algorithms (EA) usually engage in random mating strategies, that is, mating chance is independent of genotypic or phenotypic distance between individuals, in natural systems non-random mating is common, which means that somehow this mechanism has been favored during the evolutionary process. In non-random mating, the individuals mate according to their parenthood or likeness. Previous studies indicate that negative assortative mating (AM)—also known as dissortative mating—, which is a specific type of non-random mating, may improve EAs performance by maintaining the genetic diversity of the population at a higher level during the search process. In this paper we present the Variable Dissortative Mating Genetic Algorithm (VDMGA). The algorithm holds a mechanism that varies the GA’s mating restrictions during the run by means of simple rule based on the number of chromosomes created in each generation and indirectly influenced by the genetic diversity of the population. We compare VDMGA not only with traditional Genetic Algorithms (GA) but also with two preceding non-random mating EAs: the CHC algorithm and the negative Assortative Mating Genetic Algorithm (nAMGA). We intend to study the effects of the different methods in the performance of GAs and verify the reliability of the proposed algorithm when facing an heterogeneous set of landscapes. In addition, we include the positive Assortative Mating Genetic Algorithm (pAMGA) in the experiments in order test both negative and positive AM mechanisms, and try to understand if and when negative AM (or DM) speeds up the search process or enables the GAs to escape local optima traps. For these purposes, an extensive set of optimization test problems was chosen to cover a variety of search landscapes with different characteristics. Our results confirm that negative AM is effective in leading EAs out of local optima traps, and show that the proposed VDMGA is at least as efficient as nAMGA when applied to the range of our problems, being more efficient in very hard functions were traditional GAs usually fail to escape local optima. Also, scalability tests have been made that show VDMGA ability to decrease optimal population size, thus reducing the amount of evaluations needed to attain global optima. We like to stress that only two parameters need to be hand-tuned in VDMGA, thus reducing the tuning effort present in traditional GAs and nAMGA.     

Analysis of the Datagram Congestion Control Protocol’s connection management procedures using the sweep-line method

State space explosion is a key problem in the analysis of finite state systems. The sweep-line method is a state exploration method which uses a notion of progress to allow states to be deleted from memory when they are no longer required. This reduces the peak number of states that need to be stored, while still exploring the full state space. The technique shows promise but has never achieved reductions greater than about a factor of 10 in the number of states stored in memory for industrially relevant examples. This paper discusses sweep-line analysis of the connection management procedures of a new Internet standard, the Datagram Congestion Control Protocol (DCCP). As the intuitive approaches to sweep-line analysis are not effective, we introduce new variables to track progress. This creates further state explosion. However, when used with the sweep-line, the peak number of states is reduced by over two orders of magnitude compared with the original. Importantly, this allows DCCP to be analysed for larger parameter values. Somsak Vanit-Anunchai was partially supported by an Australian Research Council Discovery Grant (DP0559927) and Suranaree University of Technology. Guy Edward Gallasch was supported by an Australian Research Council Discovery Grant (DP0559927).     

Real-time measurement of pointing action by using DSP

This paper presents an approach of measuring in real-time the vector of finger that is pointing to an object. DSP is used in the operation processing unit in order to do the real-time processing. The steps include the extraction of flesh-colored regions from an image, the labeling of the flesh-colored regions, and the detection of two characteristic positions on the finger so that the direction that the finger is pointing at will be calculated. The entire process takes about 29 msec, which makes it possible to have the frame rate of 34 fps. With this frame rate, this measurement approach is considered real-time and promising to be merged into other application systems. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Entrainment and musicality in the human system interface

What constitutes our human capacity to engage and be in the same frame of mind as another human? How do we come to share a sense of what ‘looks good’ and what ‘makes sense’? How do we handle differences and come to coexist with them? How do we come to feel that we understand what someone else is experiencing? How are we able to walk in silence with someone familiar and be sharing a peaceful space? All of these aspects are part of human ‘interaction’. In designing interactive technologies designers have endeavoured to explicate, analyse and simulate, our capacity for social adaptation. Their motivations are mixed and include the desires to improve efficiency, improve consumption, to connect people, to make it easier for people to work together, to improve education and learning. In these endeavours to explicate, analyse and simulate, there is a fundamental human capacity that is beyond technology and that facilitates these aspects of being, feeling and thinking with others. That capacity, we suggest, is human entrainment. This is our ability to coordinate the timing of our behaviours and rhythmically synchronise our attentional resources. Expressed within the movements of our bodies and voices, it has a quality that is akin to music. In this paper, disparate domains of research such as pragmatics, social psychology, behaviourism, cognitive science, computational linguistics, gesture, are brought together, and considered in light of the developments in interactive technology, in order to shape a conceptual framework for understanding entrainment in everyday human interaction.