Thermal stratification and reactor piping integrity

Thermal stratification, cycling, and striping phenomena have drawn much attention recently because of the incidents at several nuclear plants that raised significant safety concerns. The concerns due to these phenomena relate to thermal fatigue in branch pipes connected to the main coolant piping. Nuclear utility industry is addressing the issue with the aim to understand the mechanisms that lead to fatigue in nominally stagnant piping systems near the reactor coolant piping. Two key results from this effort are described in this paper. First, tests to investigate the interaction between the main coolant piping and the stagnant attached lines by turbulence penetration are described and a working correlation is obtained. Turbulence penetration into unisolable lines, or the transport of turbulence into stagnant piping from the reactor coolant system (RCS) line, represents a mechanism for carrying hot RCS water into regions filled with cold water. The possibility of stratification of the two fluids (and the resultant thermal stresses) is the reason for developing an understanding of the turbulence penetration process. Secondly, results of an evaluation to develop a loading definition for thermal striping are included. Based on this testing several important conclusions relating to fatigue in nominally static reactor coolant systems are reached.     

Holistic nursing--definition and realization

Single-channel properties of a delayed rectifier voltage-gated K+ channel (I-type) were investigated in peripheral myelinated axons from Xenopus laevis. Channels activated between -60 and -40 mV with a potential of half-maximal activation, E50, at -47.5 mV. Averaged single-channel currents activated with a time delay at all membrane potentials tested. Time to half-maximal activation decreased from 80 to 1.6 msec between -60 and +40 mV. The channel inactivated monoexponentially with a time constant of 10.9 sec at -40 mV. The time constant of deactivation was 126 msec at -80 mV and 16.9 msec at -110 mV. In symmetrical 105 mM K+, the single-channel conductance (gamma) was 22 and 13 pS at negative and positive membrane potentials, respectively, at 13-15 degrees C. In Na+ -rich solution with 2.5 mM extracellular K+ gamma was 7 pS and the reversal potential was negative to -80 mV, indicating a high selectivity for K+ over Na+. gamma depended on extracellular K+ concentration (KD = 19.6 mM) and temperature (Q10 = 1.45). External tetraethylammonium (TEA) reduced the apparent single-channel amplitude at all potentials tested with a half-maximal inhibiting concentration (IC50) of 0.6 mM. Open probability of the channel, but not single-channel current amplitude was decreased by extracellular dendrotoxin (DTX, IC50 = 6.8 nM). mast cell degranulating peptide (MCDP, IC50 = 41.9 microM). In Ringer solution the membrane potential of macroscopic I-channel patches was about -65 mV and depolarized under TEA and DTX. It is concluded that besides their activation during action potentials, I-channels may also stabilize the resting membrane potential.     

Modelling and Simulation of Batch and Continuous Fluidized Bed Dryers

The performance of batch and continuous fluidized solids dryers has been modeled, with allowance for diffusional moisture transport in the dense phase particles and for interstitial gas-to-particle mass transfer within the dense phase, as well as for interphase exchange resistance between gas bubbles and the dense phase. Two types of boundary conditions are employed. Variations of the bed temperature and product moisture content in the bed with time are predicted numerically under various batch drying conditions. Exit product moisture contents, bed temperatures and outlet air humidities are also predicted for continuous drying at various mean residence times. The model can be used for homogeneous as well as bubbling fluidized bed drying. It can be used for a wide range of materials, including cereal grains and granular synthetic polymeric materials.     

60MHz相位介电测井仪模拟刻度器设计

文章以介电测井理论为基础，借鉴感应仪的模拟刻度方法，对大庆油田的６０ＭＨｚ相位介电井仪的模拟刻度进行了研究。参照国内外有关资料，提出了模拟刻度器的设计模型，通过理论分析与计算，建立了一套模拟刻度方法。现场初步试验，该方法取得了一定物效果，为进一步提高仪器的测量精度提供了依据。     

Variations of physical properties in pellets containing alumina/carbon powder mixtures during reduction and nitridation

Surface area and porosity of pellets containing alumina/carbon powder mixtures during reduction and nitridation were determined. The experimental results indicated that surface area and porosity of solid samples were decreased by increasing the reaction temperature, grain size, forming pressure and the amount of catalyst. Increasing the molar ratio of C/Al₂O₃ and gas flow rate could decrease the surface area and increase the porosity of the solid sample.     

Further studies of the mixed acetals of nucleosides

We reported in 1988 on a new nucleoside modification reaction: the exocyclic amino groups of (d)adenosine and (d)cytidine react rapidly at ambient temperature with acetaldehyde and alcohols to give stable mixed acetals (N-ethylethoxy-acetal). NH2 + O = CH(CH3) + ROH-->NH-CH(CH3)-O-R + H2O. Here we report in detail on the occurrence of this reaction in very dilute aqueous solution (ie under biological conditions), on its mechanism and kinetics, on the mixed acetal formation with other aldehydes and other nucleic acid components, and on the question of whether these adducts are mutagenic.