Mapping rule-based systems onto multicomputers using simulated annealing

In this paper, we present a static load balancing method for mapping production rules in an expert system onto processors of a message-passing multicomputer. The method uses simulated annealing to achieve a nearly optimal allocation of production rules onto processor nodes. The approach balances the initial rule distribution to avoid higher communication demand among processor nodes at run time. A formal mapping model is developed and a new cost function is defined for the annealing process. New heuristic swap functions and cooling policies are provided to ensure the quality of the annealing process. A software load balancing package, SIMAL, was implemented on a SUN workstation to carry out the benchmark experiments. The overhead associated with this mapping method is O(m In m), where m is the number of rules in the production system. Two benchmark production systems, Toru-waltz and Tourney, are mapped onto a hypercube computer with 32 nodes. Experimental benchmark results verify the effectiveness of the rule mapping method. The method can be applied for distributed artificial intelligence processing or for the parallel execution of cooperating expert systems on a message-passing multicomputer.     

新型机载高速数据通信系统设计

为了满足航空电子通信技术发展的需求,提出了基于FDDI标准的机载高速光纤通信网络体系结构,论述了该通信系统的总体设计思想和硬软件实现方案,最后简述机载高速数据通信系统的应用情况.     

Improving Cost Estimates of Construction Projects Using Phased Cost Factors

Central to cost-based competition is the capability to accurately predict the cost of delivering a project. Most literature on cost estimation focuses on specific estimation methods as generic techniques and little attention has been paid to the unique requirements at each project stage. This note attempts to identify the critical factors for effective estimation at various stages of typical construction projects. Drawing from organization control theory and cost estimating literature, this note develops a theoretical framework that identifies the critical factors for effective cost estimation during each project phase of a conventional construction project. The underlying logic is that as a cost estimating effort progresses, both task programmability and output measurability improve. As a result, control effort will shift from input-oriented control to a combination of output and behavior control.     

行政权力腐败的模型分析及治理对策

腐败是与政府行政权力相伴生的痼疾，既是一个历史现象又是一个国际现象。贪污腐败和寻租腐败是委托一代理模型中最典型的腐败方式，文章在此基础上对贪污腐败和寻租腐败进行成本一收益分析和市场均衡分析，并探讨治理行政权力腐败的有效途径。     

BPxN1-x薄膜的制备及磷元素对其光学能隙的影响

本文从应用出发，选择光学石英为衬底，采用热丝辅助射频化学气相沉积的方法沉积BPxN1—x薄膜，对样品进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外—可见等测试。XRD、SEM结果显示薄膜多晶态，表面形貌随时间变化，最终为胞状；紫外—可见光光谱结果显示BPxN1—x薄膜的紫外吸收边随沉积时间的加长、PH3流量的增加而向长波长方向移动。因此，该材料的光学能隙可以通过生长工艺适当调整。另外，BPxN1—x薄膜与液晶层能较好匹配等特性更使其适用于紫外空间光调制器。     

棒材连续剪切产生偏剪原因分析及解决措施

对棒材在摆剪连续剪切过程中出现跑偏的原因，进行了探讨和分析。并采取有效措施进行消除。解决了长期影响摆剪使用寿命及剪切质量的偏剪难题。     

用Simadyn-D改造宝钢150t电弧炉整流器控制系统

宝钢炼钢厂150 t电弧炉是我国目前最大的直流电弧炉,2003年对其整流器控制系统进行了改造。新系统采用的硬件是西门子公司的Simadyn-D系统,采用CFC编程环境。由于新系统可以与冶炼弧流模型紧密结合,因此保证了在各冶炼阶段调节器性能的最优。     

通用串行总线(USB)数据传输模型

USB作为一种数据传输接口，了解它的通信传输机制是正确利用USB利用数据传输的基础，分层次结构对USB数据传输模型加以分析，可以使读者建立起USB体系结构、通信模型和总线事务的框架和概念，并最终对USB传输工作流程有一个清晰的认识。     

New balance ground relay for parallel four-circuit transmission lines

A 66-kV network generally is grounded through a neutral grounding resistor. In this network a single-phase ground-fault current is limited to as small as 100 to 400 A. There are parallel four-circuit transmission lines mounted on the same tower in the 66-kV network. In such transmission lines, the load and the fault currents could induce circulating current that flows through the lines. Since the circulating current has zero-phase-sequence and negative-phase-sequence components, it could cause unwanted operation of a balance ground relay using zero-phase-sequence current. However, it is difficult to compensate for the circulating current by the conventional vector compensation scheme. This paper presents a new balance ground relay to deal with the circulating current. In the relay from the ground-fault inception until first tripping, the difference current Δ3I_2d of negative-phase-sequence current 3I_2d of the differential current between two protected lines is used as an input current. The Δ3I_2d is the difference current of 3I_2d between, before and during faults. After the first tripping, the difference current of positive-phase-sequence load current and zero-phase-sequence current of the forementioned differential current are used as an input current. Consequently, a higher sensitivity of the ground-fault protection for these lines has been achieved. The correct operation of the new balance ground relay was confirmed when a single-phase-ground-fault occurred in the parallel four-circuit transmission lines, to which the relay is applied.     

抗坏血酸对核乳胶性能的影响

文章介绍抗坏血酸对核乳胶灵敏度、灰雾密度及潜影衰退性能的影响，并与日本富士ＥＴ－７Ｂ型乳胶的潜影稳定性能在不同温度和相对湿度条件下作相应比较。