国家战略发展新能源股价长期走牛可期待

严峻的能源短缺、居高不下的原油价格、日益严重的环境问题已经成为制约中国经济、社会发展的瓶颈。改变现有的以化石能源为主的能源结构,     

基于图像的虚拟环境建模技术

综述了基于图像的虚拟现实环境的建模技术，并给出了各种模型表示的理论依据和建模过程的定义。把环境表示分为四类：全景图，光场数据库，深度图像和多投影中心图。全景图的生成包括基于图像相关性和基于图像整合变换的算法。光场数据库的分类主要依据全光函数。同时论述了在各种表示下的采样和建模技术。最后讨论了当前建模技术研究的热点及所需要解决的问题。     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

化工离心泵的可靠性分析

对石油化工设备安全性和维修技术的研究,需要设备运行故障率等可靠性数据。探讨了如何应用传统可靠性理论知识,并结合国内外相关标准规范和运行数据的统计分析来确定离心泵的可靠性数据的方法。     

工程建设项目职业健康安全和环境管理机构的主要职责

工程建设项目要实施健康、安全和环境管理,文章阐述了工程建设项目职业健康安全和环境管理机构设置的必要性,该机构是项目职业健康安全和环境管理体系及其管理网络的管理者,是完成项目职业健康安全和环境保护管理目标的第一责任部门。该机构的主要职责有:编制作业文件,组织培训教育,进行监测、检查和监督,审核不符合项的整改、纠正和预防工作,记录及其管理,项目职业健康安全和环境管理评审。组织精悍、职责明确的管理机构并通过严密有序的工作,是实现项目健康、安全、环境管理目标的重要保证。     

高压乙烯压缩机出入口管线振动分析及改造

为减轻高压乙烯压缩机出入口管线的振动,采用有限元建模方法,对管线结构固有频率及各阶振型进行分析计算,详细讨论了在管线同一位置加不同约束和在不同位置加同一约束的情况对管线振动的影响.最后,结合测试数据和现场实际情况提出了改造方案.实际使用结果证明改造措施有效,达到了预期的防振效果.     

Application of Code Approach for Emergency Evacuation in a Rail Station

This paper presents an emergency evacuation analysis during a mid-platform train fire in an underground rail station. A time-based evacuation scenario is developed taking into account the stairway inaccessibility due to smoke blockage. The calculation approach in NFPA 130 is then applied to a parametric study of this time-based scenario and its reliability is examined using a micro-simulation model. Both methods give consistent predictions of the exiting times. The results demonstrate that with the division of the station into two zones, the exiting time could not meet the code requirements, whereas it does meet the required exiting time without the division. Such division is due to smoke blockage and creates an uneven ratio of the occupant load to the available exiting capacity. This shows that appropriate consideration of the fire and smoke effects is important for station egress evaluation. Other issues such as the fire growth rate and the pre-evacuation time are also discussed.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

High Gd Concentration GaGdN Grown at Low Temperatures

GaGdN layers were grown at temperatures below 300°C by radio-frequency plasma-assisted molecular beam epitaxy on sapphire substrates. GaGdN samples with high Gd concentration as high as 12.5% were obtained by lowering the growth temperature. X-ray diffraction results showed no obvious secondary phase, which means that the phase separation can be suppressed by the growth at low temperatures. All samples, including those grown at room temperature, showed ferromagnetic characteristics. Photoluminescence emission was observed, though spectra exhibit broad and sharp luminescence bands related to many kinds of defects. It is suggested that electrons coming from defects, especially, nitrogen vacancy, stabilize ferromagnetism, and that the carrier-induced ferromagnetism occurs in the low-temperature-growth GaGdN.     

静压下ZnS：Te中Te等电子陷阱的发光

研究了4块ZnS：Te薄膜样品(Te组分从0．5％到3．1％)的光致发光谱在常压下的温度特性．对于Te组分较小的2块样品观察到2个发光峰，分别来自Te1和Te2等电子陷阱；而对Te组分较大的2块样品则只观察到1个来自Te2等电子陷阱的发光．我们还研究了这些发光峰在低温1．5K下的流体静压压力行为．观察到与Te1有关的发光峰压力系数比ZnS带边的要大很多，而与Te2有关的发光峰压力系数则比带边小．根据Koster-Slater模型，价带态密度半宽随压力的增加是Te1中心有较大压力系数的主要原因，而Te1和Te2中心的不同压力行为则是由于压力对两者缺陷势增强的不同效果引起的．