10 Gbit/s optical soliton transmission over 7200 km by using amonolithically integrated MQW-DFB-LD/MQW-EA modulator light source

The authors demonstrate 10 Gbit/s optical soliton transmission in a recirculating loop through the use of a monolithically integrated MQW-DFB-LD/MQW-EA modulator light source. The timing jitter due to the Gordon-Haus effect is successfully reduced by the optical bandpass filters conventionally used in the cascaded EDFAs to avoid the accumulation of amplified spontaneous emission. The transmission distance of 7200 km is achieved at a bit error rate of 10^-9     

Duration of spinal anaesthesia is determined by the partition coefficient of local anaesthetic

We have compared the duration of motor block produced by four local anaesthetics administered into a chronically implanted subarachnoid catheter in rabbits. Each group (n = 6) received four different doses of amethocaine, bupivacaine, lignocaine or procaine, and the duration of the resulting motor block was assessed. Dose-response curves were plotted for each drug. As a measure of activity of the anaesthetics, we used the dose of each drug required to produce block of 60-min duration (D60 min) and the correlation between D60 min and different drug properties was examined. An inverse linear correlation (r = 0.995; P < 0.01) was observed between log D60 min and the log of the partition coefficient of the local anaesthetics. No correlation was found between the effect and degree of protein binding, pKa or molecular weight. These results suggest that, in spinal anaesthesia, the partition coefficient could be used as a predictor of the duration of anaesthetic action.     

Resonance assignment of methionine methyl groups and chi 3 angular information from long-range proton-carbon and carbon-carbon J correlation in a calmodulin-peptide complex

Several simple 3D experiments are used to provide J correlations between methionine C epsilon methyl carbons and either the C gamma H2 protons or C beta and C gamma. The intensity of the J correlations provides information on the size of the three-bond J couplings and thereby on the chi 3 torsion angle. In addition, a simple 3D version of the HMBC experiment provides a sensitive link between the C epsilon H3 methyl protons and C gamma. The methods are demonstrated for a 20 kDa complex between calmodulin and a 26-residue peptide fragment of skeletal muscle myosin light chain kinase.     

Aortic valve papillary fibroelastoma. A diagnosis by transthoracic echocardiography

Cardiac papillary fibroelastomas are unusual, frond-like growths typically found on cardiac valves, diagnosed incidentally on autopsy or cardiac surgery, but rarely during life. We report a rare case of an aortic valve papillary fibroelastoma detected by transthoracic echocardiography and confirmed by histologic study.     

Ubiquitin expression in inclusion body myositis. An immunohistochemical study

Ubiquitin has been shown by immunohistochemical studies to be a component of many of the filamentous inclusion bodies that are known in neuropathology. In the current study, we examined the expression of ubiquitin in 14 cases of typical inclusion body myositis, in skeletal muscle specimens from four cases of typical amyotrophic lateral sclerosis, and in muscle specimens from three normal controls. In the cases of inclusion body myositis, rimmed vacuoles were ubiquitin immunoreactive in all cases. Intrasarcoplasmic inclusions were positive in the nine cases that had them. In four cases, there were positive intranuclear inclusions, and in seven, there was homogeneous staining of nuclei. Atrophic fibers and necrotic fibers were positive in 11 and nine cases, respectively. In the cases of amyotrophic lateral sclerosis, atrophic fibers were positive in three cases, and focal nuclear staining was seen in two. In one of the three control cases, a few atrophic fibers had faint sarcoplasmic positivity; no other staining was seen. We conclude that ubiquitin is a component of the inclusions that characterize inclusion body myositis. However, ubiquitin expression in skeletal muscle disease is not pathognomonic of inclusion body myositis.     

In-beam tests of proximity mesh dynode tubes for the STAR TOF subsystem

The performance of Bicron BC404, BC408 and BC420 scintillators coupled to a Hamamatsu R3432 proximity mesh dynode photomultiplier tube was studied using pion beams from the TRIUMF cyclotron and the Brookhaven National Laboratory AGS accelerator. A system resolution of better than 100 ps seems feasible. This will satisfy the requirement for charged particle identification in the STAR detector at RHIC.     

Photoelectric properties of planar structures with double Schottky barrier treated in a high-vacuum microwave discharge

The state of the surface of n-GaAs crystals upon high-vacuum microwave plasmachemical (HVMWPC) etching in various gas mixtures and the influence of the semiconductor surface condition on the photoelectric characteristics of related metal-semiconductor-metal structures with double Schottky barrier (MSMDSB structures) are investigated. Dependence of the HVMWPC etching rate of the GaAs surface on the gas mixture composition and substrate temperature is determined. It is shown that the HVMWPC etching regime strongly influences the photoelectric properties of MSMDSB structures: the treatment can lead to either growth or drop in photosensitivity of the samples. Optimum etching regimes are established for which good semiconductor surface quality and high photosensitivity of the MSMDSB structures are retained at a high etching rate.     

A Linear Cross-Coupled Control System for High-Speed Machining

We present a linear cross-coupled controller to improve highspeed contouring accuracy independently of tracking accuracy in a biaxial machine tool feed drive servomechanism. Unlike conventional cross-coupled controllers, the cross-coupled controller presented here is a linear system, so it is very easy to perform the stability and steady-state error analysis, and to optimise the controller parameters. The proposed controller is evaluated experimentally on a CNC LOM machine and compared to an uncoupled controller and a conventional cross-coupled controller. Controller performance is evaluated for a circular contour at a feedrate of 30 m min _1 . The experimental results show that the proposed controller can greatly reduce the contour error at large feedrates. The linear cross-coupled controller is simple to implement and is practical.