Interface characteristics and mechanical properties of carbon fibre reinforced copper composites

Interface characteristics of carbon fibre reinforced copper matrix composites materials with various interface states and their effect on the flexural strength of composites have been studied. Interfacial states are mechanical bonding, dissolution bonding and reaction bonding. To a certain extent, raising the interfacial strength enables an increase in the flexural strength due to prevention of carbon fibre being pulled out under low stress during fracture process of composites. Raising the interfacial bondage strength, causes the brittleness of composites to increase; the fracture surface of composites is converted from a fibre pull-out model to a fibre even model. While strengthening the interface bondage, the extent of chemical reaction and dissolution at the interface must be controlled to avoid degrading the carbon fibre.     

Medical savings accounts: opportunities for cost savings?

Interest in medical savings accounts (MSAs) as a potential tool to reduce healthcare costs has been widespread. A small number of countries have either implemented or run pilot programs of MSAs, and vigorous policy debates have taken place in several other countries about the potential merits of introducing MSAs as a method of paying for health care. In this paper we develop a model to assess the cost saving potential of MSAs in a publicly funded healthcare system. We assume that the public healthcare payer may choose between reimbursing healthcare expenditures through an MSA or through a form of third‐party payer insurance. We use the model to identify the conditions under which MSAs may reduce costs. We illustrate using data on healthcare expenditures from Canada.     

SCC casting prediction for the realization of prototype VHPC-precambered composite beams

Casting simulations of self-compacting concrete are carried out in order to obtain a value of the minimum fluidity needed to cast a VHPC precambered composite beam. The mix proportioning of the concrete takes into account this minimum value. The numerical predictions are finally compared with the experimental observations during two casting tests and the real casting of the two 13 m beams. Although the simplifying assumptions needed to carry out the simulations are numerous, there is an agreement between the predictions and the real casting.     

Precision Spectrometric Determination of Th and Pu in Solutions with Arsenazo III Using Internal Standardization

A spectrophotometric procedure with internal standardization was suggested for precision determination of the concentrations of Th and Pu in the form of colored complexes with arsenazo III in nitric acid solutions. The sensitivity of the method was significantly improved owing to the use of colored complexes. The optical density optimum (0.3-0.5) of the solutions for spectrophotometric measurements can be achieved at concentrations in solution of the element analyzed as low as (2-3) ×10^-6 M, at the arsenazo and HNO₃ concentrations of 1 ×10^-4 and 6 M, respectively. With this composition of the solution, the relative rms deviation of the results for a single run is no greater than 0.15 and 0.3% for thorium and plutonium, respectively.     

Vapor pressure and thermodynamic functions of TeI<Subscript>4</Subscript> and its decomposition products

Using a flow method, we have measured the vapor pressure of tellurium tetraiodide, an attractive reagent for chemical vapor deposition technology. The results, combined with earlier tensimetric data, have been used to evaluate the basic thermodynamic functions of TeI₄ and its thermolysis products.     

Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

The structure and properties of a Cr<Subscript>3</Subscript>C<Subscript>2</Subscript>-Ni coating deposited by a high-velocity plasma jet onto a copper substrate

Chromium carbide-nickel coatings were deposited onto a technical grade copper substrate by means of a high-velocity plasma jet of a plasmatron operating in specially selected regimes. An analysis of the coatings showed evidence of the formation of a Ni-based solid solution, a complex chromium carbide (Cr₇C₃), and an fcc crystal phase with a lattice parameter of 3.614 Å. The surface of the coatings exhibits a characteristic relief resulting from a dynamic interaction between melted and fused particles of the initial powder. The local hardness on some areas of the surface and in depth of the coating reaches 66±4.5 HRC, while the coating adhesion strength varies from 25 to 300 MPa.     

Specifying concurrent systems with TSL

The Task Sequencing Language (TSL), which lets programmers specify constraints on the behavior of concurrent programs, is described. The constraints, specified by high-level annotations to Ada programs, are monitored at runtime; when a violation is detected, control is returned to the user, along with information about the nature of the violation. It is argued that such a tool is a necessary crutch for human reasoning capabilities when dealing with the complexities of concurrent process interaction. The first large-scale application of TSL, the specification and validation of a distributed tasking supervisor for Ada, is described