An efficient approach for calculating the dispersions of photonic-crystal fibers: design of the nearly zero ultra-flattened dispersion

A novel and efficient approach is proposed to calculate the dispersions of the guided modes of the photonic-crystal fibers (PCFs). Based on the vector boundary-element method (VBEM), the surface integral equations for the first and second derivatives of the propagation constants with respect to the wavelength are explicitly derived. Compared with the three-point finite-difference approach, which needs to solve and search three effective indexes near the interested wavelength, this approach can determine the dispersions of the PCFs by only solving one effective index at this wavelength based on the derived formulations. This novel approach saves over 60% computing time without losing the accuracy. Based on this approach, a novel four-ring PCF is designed by optimizing only three geometrical parameters to achieve the nearly zero ultra-flattened dispersion property. Compared with previously presented dispersion-flattened PCFs, the design procedure for the four-ring structure could be more efficient and easier because relatively lesser parameters need to be optimized.     

60Co辐照预处理对苹果片脱水特性和品质的影响

进行了不同辐照剂量、热风温度、切片厚度对苹果脱水速率及品质的影响试验,结果表明该三因子影响苹果片的脱水速率和外观质量.辐照剂量增加,热风温度增高,脱水速率高,VC含量和复水比下降.辐照剂量、热风温度、切片厚度三因素对脱水速率和干制品的外观质量、VC含量、复水比等四指标大都呈显著影响.     

用两亲聚合物制备大颗粒苯丙乳液

分别以两亲聚合物P(C9-AA)和P(DCPD-St-α-St-AA)作乳化荆，研究了制备大颗粒(约1μm)及具有一定稳定性的苯丙乳液的方法，讨论了乳化剂，温度及引发剂用量对乳液性能的影响。结果表明，以P(C9-AA)作乳化剂时，引发剂用量为单体质量的1．2％，90℃时可以合成性能良好的苯丙乳液；以P(DCPD-St-α-St-AA)作乳化荆时，引发剂用量为单体质量的1．2％，80℃时可以合成性能良好的苯丙乳液。     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

模块化职务分析

章总结了职务分析方法在我国的应用情况，分析了需求特点，引入模块化的思想，提出了新的职务分析方法——模块化职务分析，认为职务分析的关键就是将工作中的各项任务进行整理，组成不同的工作模块。建立计算机辅助管理系统，时时调整、修改工作模块，对工作模块进行组合，形成职务，从而使职务分析趋于动态化。     

PetaStar: a petabit photonic packet switch

This paper presents a new petabit photonic packet switch architecture, called PetaStar. Using a new multidimensional photonic multiplexing scheme that includes space, time, wavelength, and subcarrier domains, PetaStar is based on a three-stage Clos-network photonic switch fabric to provide scalable large-dimension switch interconnections with nanosecond reconfiguration speed. Packet buffering is implemented electronically at the input and output port controllers, allowing the central photonic switch fabric to transport high-speed optical signals without electrical-to-optical conversion. Optical time-division multiplexing technology further scales port speed beyond electronic speed up to 160 Gb/s to minimize the fiber connections. To solve output port contention and internal blocking in the three-stage Clos-network switch, we present a new matching scheme, called c-MAC, a concurrent matching algorithm for Clos-network switches. It is highly distributed such that the input-output matching and routing-path finding are concurrently performed by scheduling modules. One feasible architecture for the c-MAC scheme, where a crosspoint switch is used to provide the interconnections between the arbitration modules, is also proposed. With the c-MAC scheme, and an internal speedup of 1.5, PetaStar with a switch size of 6400 /spl times/ 6400 and total capacity of 1.024 petabit/s can be achieved at a throughput close to 100% under various traffic conditions.     

高坝风险分析的事件树法

新世纪一批高坝将要在我国开工建设,这对我国的水电能源及国民经济的发展有着不可估量的作用,而高坝建设中,安全性是需要首先保证的。目前对高坝的风险分析方法有主观概率法、客观概率法等。从系统工程的角度出发,采用事件树方法对高坝的风险进行了探索研究,并给出了算例以说明该方法的有效性和实用性。     

基于VHDL实现单精度浮点数的加／减法运算

研究了单精度浮点数加／减法的结构及其设计方法，并在Aldec公司的Active—HDL软件环境下，采用VHDL语言进行设计，并进行了仿真验证，计算精度可以达到10^-7。     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Modeling Multiterminal Spintronic Devices

We are encountering tremendous opportunities and challenges in combining emerging nanotechnology for developing nanoelectronic devices. Researchers are designing nanoelectronic circuits based on newly discovered nanoscale building blocks, such as spintronic devices. In this paper, we calculate conductance in spintronic gates using the nonequilibrium Green's function and show useful operations for "multiterminal" logic gates. These spintronic devices can be used to design complicated spin circuits