Guerbet十四醇的合成与表征

以正庚醇为原料 ,通过Guerbet反应合成Guerbet十四醇 (2 戊基壬醇 ,C14 GA)。用IR、NMR和元素分析测定了C14 GA的结构 ,并研究了反应温度和用料比对其产率的影响。实验结果如下 :(1)在较优化的反应条件下 (正庚醇的总加入量为 1mol,在实验过程中 ,先加入 1/ 3mol庚醇和 1/ 4mol的KOH ,在 16 0℃下反应 2h ,然后再加入剩下的 2 / 3mol庚醇和 4g 5 %Pd -C催化剂 ,在 15 5℃下反应 6h)合成产物 ,其产率可达到 5 4 2 0 % ;(2 )所合成的产物与试图要得到的Guerbet十四醇 (2 戊基壬醇 ,C14 GA)含有相同的基团 (2×—CH3、10×—CH2 —、1×CH、1×—CH2 —O—和 1×—OH) ,而且 ,所合成的产物中 ,w (C) =79 0 6 % ,w (H ) =13 6 2 % ,与从Guerbet十四醇分子式计算的理论值w(C) =78 5 0 % ,w (H) =14 0 1%基本一致。可见所合成的产物正是Guerbet十四醇 (C14 GA)     

钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO

In this paper, the photocatalytic activity of industrial titanium dioxide (TiO₂) based nacreous pigments was researched as functional building materials for photocatalytic NO remove. Three industrial TiO₂ based nacreous pigments were selected to estimate the photocatalytic activity for NO remove. This study is a good proof that pearlescent pigments can eliminate NO, and its performance is positively correlated with its titanium dioxide content. And this research will widen the application of nacreous pigments in functional building materials, and provide a new way to eliminate in door nitric oxide pollution.     

多降液管筛板塔的设计计算

简要介绍多降液管筛板塔的特点及塔板参数的设计计算方法。     

Substrate-mediated interactions and intermolecular forces between molecules adsorbed on surfaces

Adsorbate interactions and reactions on metal surfaces have been investigated using scanning tunneling microscopy. The manners in which adsorbates perturb the surface electronic structure in their vicinity are discussed. The effects these perturbations have on other molecules are shown to be important in overlayer growth. Interactions of molecules with surface steps are addressed, and each molecule's electron affinity is shown to dictate its adsorption sites at step edges. Standing waves emanating from steps are demonstrated to effect transient molecular adsorption up to 40 A away from the step edge. Halobenzene derivatives are used to demonstrate how the surface is important in aligning reactive intermediates.     

聚合物多元醇产品质量的影响因素与控制

从内在和外在质量两个方面，简要论述了影响聚合物多元醇(POP)产品质量的因素和控制产品质量的措施。     

乙环唑的合成研究

介绍了以2,4-二氯苯乙酮为原料通过催化溴化、缩合反应、与三氮唑钠反应制得原药,原药含量达到92%以上.并对合成条件进行了研究,取得了较为满意的结果.     

普钙产品转化率的数值计算方法

对影响普钙产品转化率的各种因素进行了分析,利用MATLAB 软件包得到了转化率的计算公式,提出了确定未分解磷矿的比例和由倍半氧化物引起的有效磷退化幅度的方法,为生产系统的预测和调整提供了一种途径。     

A THEORETICAL STUDY OF MASS AND HEAT TRANSFER IN FILM FLOW OF NONNEWTONIAN POWER LAW FLUIDS

The exact expressions of concentration and local or average Sherwood number,Sh or Sh for non-Newtonian fluids which obey the famous power law:τ={K|1/2(1/2)~(1/2)|~(n=1)}in which the flow index n takes any positive rational value,have been obtained by solving the differen-tial equation of diffusion together with the velocity distribution in the falling film flow.The use of Fourth-order Runge-Kutta method and Wegstien's iteration method by means of thecomputer yields results which are a series of values of dimensionless concentration O,local and averageSherwood number for n equal to 1/4,1/3,1/2,1/1.4,1/1.2,1,1.25,2.5,and ∞.When the flow indexn=1,i.e.for Newtonian fluids,the result agrees well with the data from the literature.