企业内部信息系统的故障监控研究与应用

针对大型企业内部网络中信息系统的故障监控缺乏有效手段的问题,从Web网页、应用服务器、数据库服务器、服务器网络硬件、C/S系统等多个角度入手进行研究,提出一个对内网信息系统进行实时监控的故障监控系统,并详述了它的工作流程和实现细节。目前实现的系统通过试用效果良好,方案亦被证明是行之有效的,并可在相近环境中推广应用。     

高抗冲聚苯乙烯的阻燃研究

利用锥形量热仪(CONE)研究了阻燃高抗冲聚苯乙烯(HIPS)的燃烧性能,同时也采用垂直燃烧、氧指数等方法进行了对比测试。含十溴二苯乙烷的试样不仅保持了原有的物理机械性能,而且阻燃效果明显。相对于使用十溴二苯醚阻燃的HIPS,十溴二苯乙烷的使用不会产生多溴代二问题,产品符合一定的环保要求。     

混炼硅橡胶的配合技术(八)

介绍了2种汽车部件（密封图、汽车挡风玻璃刮片）装配用混炼硅橡胶的配制，以及硫化过程中能与接触基材粘接的混炼硅橡胶（通过添加各种增粘剂如含乙烯烃碳酸酯基或巯基乙酸酯基化合物、烷氧基硅烷、含乙烯基硅官能基过氧化物为硫化剂）的配制。     

Effect of the Three Gorges Reservoir on vertical distribution of suspended sediment concentration and estimation accuracy of depth-average concentration in downstream reaches

The sediment regime in the middle Yangtze River has been significantly changed from quasi-equilibrium to nonequilibrium since the impoundment of the Three Georges Reservoir (TGR). To understand the effects of the TGR on vertical distribution of suspended sediment concentration (SSC) and estimation accuracy of mean concentration, vertical sediment concentration and flow velocity data at the Shashi and Jianli hydrological stations in the reach before and after the impoundment were collected. Comparisons and analysis of vertical profiles of SSC before and after the TGR impoundment show that after the impoundment of the TGR, due to the coarsening of sediment particle size, the reduction in sediment load, and the significant decrease in sediment saturation, the vertical distribution of SSC in the downstream reaches became more uneven under medium and low water flows, which was reflected in the vertical gradient and the fluctuation degree of SSC significantly increased. In addition, the depth-average sediment concentrations were calculated by the selected-point method and the mean values calculated by the “multi-point method” were regarded as the “true mean” to evaluate the accuracy of the mean value calculated by the “few-point method.” It was found that the relative errors for the selected-point method were mainly positive before impoundment but mainly negative after impoundment. Additionally, the correction factors of one-point, two-point, and three-point methods and the position of the near-bed substituted point for the five-point method were given to reduce the error when the point measurements were used to calculate the depth-average sediment concentration in the downstream reaches.     

冲积河流推移质输沙最优河道形态影响因素理论分析

为从理论上确定水沙动力、阻力和边界条件对冲积河流推移质输沙最优河道形态和最小比降的影响,基于 水力半径分割方法将河床整体糙率划分为河岸糙率和河底糙率;采用河道形态自动调整变分方法,以等腰梯形为 河道过水断面,推导推移质输沙率与河道形态的关系,分析河岸与河底相对糙率、河岸坡角、流量、输沙率、中值 粒径和河底糙率对最优河道形态和最小比降的影响。结果表明：最优河道形态和最小比降随河岸与河底相对糙 率的增大而减小,随河岸坡角的增大而增大。流量或者河底糙率的增加将使最小比降减小,同时造成最优河道形 态趋向窄深。输沙率或者中值粒径的增加将使最小比降增大,但两者对最优河道形态演变的影响不同,输沙率增 大将使最优河道形态向宽浅发展,而中值粒径增加将使最优河道形态向窄深发展。     

压缩感知算法在阵列测向中的相干信号分辨

现有算法在进行信号重建时,需要原始信号的稀疏信息来控制初始原子集的大小和算法迭代的最大次数,这削弱了重建精度,增加了计算复杂度,限制了其实际应用能力。为了克服这个问题,提出了基于正交匹配追踪算法的改进算法。该算法将阵元个数作为假设稀疏度,在稀疏度未知的初始阶段扩展初始原子集。最后通过对测量信号的幅度进行阈值过滤以实现信号的分辨和信源数的估计。为解决测向人员面对监测软件所指示的多个信号示向度中,无法分辨哪些指示方向是同一个信号源所产生的折反射信号的问题,首次提出了基于压缩感知算法的相干关系分析和相干信号分辨的模型。实测数据结果表明,该算法在不同环境下可以清晰分辨相干信号,并且能够适应多种实验平台。     

Abrasive wear in filled elastomers

The abrasive wear of rubbers is strongly affected by the filler particles dispersed in the elastomer matrix. The fillers are incorporated usually for the purposes of mechanical reinforcement and improving the conductivity of the neat resins. It is found that the wear rates of the filled silicone rubbers increase slowly with filler concentration until a critical volume fraction,v _c, is reached, at which point they increase very rapidly with increasing filler concentration. This behaviour appeared to be universal in all the filled silicones we studied, regardless of the type of filler and silicone rubber used. However the magnitude of the critical filler fraction,v _c, can be changed significantly with the filler shape, resin cross-linking density and filler surface treatments. No reasonable relationship could be found between this wear behaviour and the mechanical properties measured in a macroscopic manner. Experimental evidence suggests that the incipient cracks that lead to wear losses may start within the thin layers of highly stressed material, the damage zones, surrounding the rigid particles. A simple model taking into account the stress concentration induced by the rigid fillers shows excellent correlation between the wear rate and the damage zones volume. With this new model, the observed wear behaviours can be explained satisfactorily.