Characterization of thermochemical properties of Al nanoparticle and NiO nanowire composites

Thermochemical properties and microstructures of the composite of Al nanoparticles and NiO nanowires were characterized. The nanowires were synthesized using a hydrothermal method and were mixed with these nanoparticles by sonication. Electron microscopic images of these composites showed dispersed NiO nanowires decorated with Al nanoparticles. Thermal analysis suggests the influence of NiO mass ratio was insignificant with regard to the onset temperature of the observed thermite reaction, although energy release values changed dramatically with varying NiO ratios. Reaction products from the fuel-rich composites were found to include elemental Al and Ni, Al₂O₃, and AlNi. The production of the AlNi phase, confirmed by an ab initio molecular dynamics simulation, was associated with the formation of some metallic liquid spheres from the thermite reaction.     

Piezoelectric properties of highly densified 0.01Pb (Mg1/2W1/2)O3–0.41Pb (Ni1/3Nb2/3)O3–0.35PbTiO3–0.23PbZrO3+0.1 wt% Y2O3+1.5 wt% ZnO thick films on alumina substrate

This paper reports on the formation of highly densified piezoelectric thick films of 0.01Pb(Mg_1/2W_1/2)O₃–0.41Pb(Ni_1/3Nb_2/3)O₃–0.35PbTiO₃–0.23PbZrO₃+0.1 wt% Y₂O₃+1.5 wt% ZnO (PMW–PNN–PT–PZ+YZ) on alumina substrate by the screen-printing method. To increase the packing density of powder in screen-printing paste, attrition milled nano-scale powder was mixed with ball milled micro-scale powder, while the particle size distribution was properly controlled. Furthermore, the cold isostatic pressing process was used to improve the green density of the piezoelectric thick films. As a result of these processes, the PMW–PNN–PT–PZ+YZ thick film, sintered at 890 °C for 2 h, showed enhanced piezoelectric properties such as P_r=42 μC/cm², E_c=25 kV/cm, and d₃₃=100 pC/N, in comparison with other reports. Such prominent piezoelectric properties of PMW–PNN–PT–PZ+YZ thick films using bi-modal particle distribution and the CIP process can be applied to functional thick films in MEMS applications such as micro actuators and sensors.     

The influence of filler on the emission properties and rheology of carbon nanotube paste

CNT paste consists of organic solution, inorganic binder and filler. Organic solution contains organic resins and solvent including surfactants which finely disperse CNTs. Filler affects surface morphology, electron emission property, viscosity, and rheological characteristics of CNT paste. We used different fillers such as silver and alumina in CNT paste for special function. The emission properties of CNT paste with silver are similar to those of CNT paste with alumina if filler portion is the same. From the scanning electron microscope (SEM) different morphologies of CNTs was observed depending on the type of filler. CNT paste which showed good emission property had vertically well-aligned CNTs on the surface after surface treatment using adhesive tape. We measured viscosity and rheological properties with rheometer RS600 from HAAKE. Emission property of CNT paste was evaluated in vacuum chamber of 10^{− 6} Torr with pulse generator and duty was 1/500.     

Effects of modifiers in organoclays on the curing reaction of liquid‐crystalline epoxy resin

The effects of three organoclays (Cloisite 10A, 93A, and 30B) with different modifiers on the curing reaction of a liquid‐crystalline epoxy (LCE) resin based on 4,4′‐diglycidyloxybiphenyl and the curing agent sulfanilamide were studied. The curing kinetics of the LCE and clay composites were analyzed with differential scanning calorimetry. The Flyann–Wall–Ozawa and Kissinger–Akahira–Sunose methods were used to calculate the activation energies at different conversions. All three alkylammonium ions lowered the reaction activation energy and catalyzed the epoxy ring‐opening reaction with the diamine curing agent. 30B, with two hydroxy groups of quaternary ammonium, showed the highest catalysis because the hydroxy groups facilitated the curing process. 10A and 93A had similar catalytic abilities. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1329–1334, 2005     

Development of an optimal multifloor layout model for the generic liquefied natural gas liquefaction process

Liquefied natural gas (LNG) is attracting significant interest as a clean energy alternative to other fossil fuels, mainly for its ease of transport and low carbon dioxide emission. As worldwide demand for LNG consumption has increased, liquefied natural gas floating, production, storage, and offloading (LNG-FPSO) operations have been studied for offshore applications. In particular, the LNG-FPSO topside process systems are located in limited areas. Therefore, the process plant layout of the LNG-FPSO topside systems will be optimized to reduce the area cost occupied by the topside equipment, and this process plant layout will be designed as a multifloor concept. We describe an optimal layout for a generic offshore LNG liquefaction process operated by the dual mixed refrigerant (DMR) cycle. To optimize the multifloor layout for the DMR liquefaction cycle process, an optimization was performed by dividing it into first and the second cycles. A mathematical model of the multifloor layout problem based on these two cycles was formulated, and an optimal multifloor layout was determined by mixed integer linear programming. The mathematical model of the first cycle consists of 725 continuous variables, 198 equality constraints, and 1,107 inequality constraints. The mathematical model of the second cycle consists of 1,291 continuous variables, 286 equality constraints, and 2,327 inequality constraints. The minimization of the total layout cost was defined as an objective function. The proposed model was applied to DMR liquefaction cycle process to determine the optimal multifloor layout.     

Human Endothelial Progenitor Cells Protect the Kidney against Ischemia-Reperfusion Injury via the NLRP3 Inflammasome in Mice

Ischemia-reperfusion injury (IRI) is a major cause of acute kidney injury (AKI) and progression to chronic kidney disease (CKD). However, no effective therapeutic intervention has been established for ischemic AKI. Endothelial progenitor cells (EPCs) have major roles in the maintenance of vascular integrity and the repair of endothelial damage; they also serve as therapeutic agents in various kidney diseases. Thus, we examined whether EPCs have a renoprotective effect in an IRI mouse model. Mice were assigned to sham, EPC, IRI-only, and EPC-treated IRI groups. EPCs originating from human peripheral blood were cultured. The EPCs were administered 5 min before reperfusion, and all mice were killed 72 h after IRI. Blood urea nitrogen, serum creatinine, and tissue injury were significantly increased in IRI mice; EPCs significantly improved the manifestations of IRI. Apoptotic cell death and oxidative stress were significantly reduced in EPC-treated IRI mice. Administration of EPCs decreased the expression levels of NLRP3, cleaved caspase-1, p-NF-κB, and p-p38. Furthermore, the expression levels of F4/80, ICAM-1, RORγt, and IL-17RA were significantly reduced in EPC-treated IRI mice. Finally, the levels of EMT-associated factors (TGF-β, α-SMA, Snail, and Twist) were significantly reduced in EPC-treated IRI mice. This study shows that inflammasome-mediated inflammation accompanied by immune modulation and fibrosis is a potential target of EPCs as a treatment for IRI-induced AKI and the prevention of progression to CKD.     

Modified poly(caprolactone trifumarate) with embedded gelatin microparticles as a functional scaffold for bone tissue engineering

Bone tissue engineering offers high hopes in reconstructing bone defects that result from trauma, infection, tumors, and other conditions. However, there remains a need for novel scaffold materials that can effectively stimulate ossification with appropriate functional properties. Therefore, a novel injectable, biodegradable, and biocompatible scaffold made by incorporating modified poly(caprolactone trifumarate) (PCLTF) with embedded gelatin microparticles (GMPs) as porogen is developed. Specifically, in vitro and in vivo tests were carried out. For the latter, to determine the osteogenic ability of PCLTF‐GMPs scaffolds, and to characterize bone‐formation, these scaffolds were implanted into critical‐sized defects of New Zealand white rabbit craniums. Field Emission Scanning Electron Microscope (FESEM) demonstrated cells of varying shapes attached to the scaffold surface in vitro. The PCLTF‐GMPs demonstrated improved biocompatibility in vivo. Polyfluorochrome tracers detected bone growth occurring in the PCLTF‐GMPs filled defects. By incorporating PCLTF with GMPs, we have fabricated a promising self‐crosslinkable biocompatible and osteoconducive scaffold for bone tissue engineering. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43711.     

Highly sensitive electrochemical sensor based on zirconium oxide-decorated gold nanoflakes nanocomposite 2,4-dichlorophenol detection

Journal of Applied Electrochemistry - In this study, a sensitive and selective electrochemical sensor based on a zirconia oxide-decorated gold nanoflake nanocomposite-modified glassy carbon...     

Isolation of the polysaccharidase-producing bacteria from the gut of sea snail, <Emphasis Type="Italic">Batillus cornutus</Emphasis>

This study was conducted to isolate microorganisms from the gut of the marine turban shell, Batillus cornutus, which inhabits the mainland of South Korea and primarily feeds on brown algae. We were interested in isolating such gut bacteria by considering their potential to produce the polysaccharidases required for digestion of brown seaweeds and isolated three different bacteria from the gut of Batillus cornutus. The isolated bacteria were identified as Bacillus sp. JMP-A, Bacillus sp. JMP-B and Staphylococcus sp. JMP-C. The organisms were evaluated for their ability to produce polysaccharidases such as cellulase, alginate lyase, laminarinase and kelp-lyase. Bacillus sp. JMP-A and Bacillus sp. JMP-B showed a clear zone of CMC hydrolysis with a radius 1.10 (±0.057) and 3.88 cm (±0.088), respectively, whereas Staphylococcus sp. JMP-C showed no zone of CMC hydrolysis. SEM analysis confirmed that the ability of the bacterial isolates to degrade kelp differs and is correlated with kelp-lyase production. The cell free extract of the Bacillus sp. JMP-A isolate showed the highest activities of CM-cellulase, α-cellulase, laminarinase and kelp-lyase, which were 22.76, 27.10, 66.59 and 64.36 U/mg, respectively. Meanwhile, the amount of sugars released was higher during the saccharification of kelp by dialyzed intracellular enzymes of the bacterial isolates than when dialyzed extracellular enzyme was used. Experimental results of dialyzed enzymatic saccharification of the kelp demonstrated that use of partially purified enzymes was effective for glucose production.     

Preparation and characterization of polyimide/modified layered double hydroxide nanocomposites

Polyimide (PI)/modified layered double hydroxide (m‐LDH) nanocomposites were prepared in this study. For this work, m‐LDHs were prepared from layered double hydroxides (LDHs) through an anionic exchange reaction with pyromellitic dianhydride (PMDA), succinic acid or terephthalic acid. PMDA and 4,4′‐oxydianiline were used to make the poly(amic acid) precursor for PI. X‐ray diffraction and transmission electron microscopy measurements confirmed that the PMDA‐modified LDH (PMH) and terephthalic acid‐modified LDH (TMH) were well dispersed in the PI matrix. For the succinic acid‐modified LDH, some of the LDH was intercalated with the succinic acid molecules but most maintained its original structure. Thus, the PI/PMH and PI/TMH nanocomposites exhibited improved mechanical, thermal and electrical properties compared to pure PI. The PMH has aromatic groups and is expected to have better π–π interactions with the PI chains than the other m‐LDHs. Thus, the PI/PMH nanocomposites exhibited the best properties among the nanocomposites investigated. Copyright © 2010 Society of Chemical Industry