Control of methane flame properties by hydrogen fuel addition: Application to power plant combustion chamber

This study presents a numerical investigation of the effects of mixing methane/hydrogen on turbulent combustion processes taking place in a burner similar to that integrated in gas turbine power plants. Thereby, in comparison to the reference case where the burner is fuelled by 100% of methane, the variations of the axial velocity field, temperature field and mass fraction of carbon monoxide field are examined for different percentages of hydrogen fuel injection. The computed results, obtained by using the software Fluent-CFD, are compared and validated against experimental reference data. Results show that the hydrogen addition to the methane has an impact on all physical and chemical parameters of the reactive system.     

A synthesis of functionalized spiro isobenzofuran-1,6′-[1,3] thiazines from phthalic anhydride-malononitrile adduct and ammonium carbamodithioates

The reaction of 2-[3-oxo-isobenzofuran-1(3H)- ylidene]malononitrile, generated from phthalic anhydride and malononitrile, with ammonium alky(aryl)carbamodithioates, leading to the formation of functionalized spiro isobenzofuran-1,6′-[1,3]thiazine systems, in good yields, is reported.     

A Modified Method for the Determination of N‐Nitrosodiethanolamine in Coconut Diethanolamide Using HPLC with Dual‐Wavelength UV–Vis Detector

A simple and novel method based on high‐performance liquid chromatography with dual‐wavelength ultraviolet detection at 234 and 254 nm has been developed for the determination of underivatized N‐nitrosodiethanolamine in coconut diethanolamide. The correlation coefficient obtained shows that the method is correct.     

Synthesis of thermoresponsive block and graft copolymers via the combination of living cationic polymerization and RAFT polymerization using a vinyl ether-type RAFT agent

A novel vinyl ether-type RAFT agent, benzyl 2-(vinyloxy)ethyl carbonotrithioate (BVCT) was synthesized for various block copolymers via the combination of living cationic polymerization of vinyl ethers and reversible addition−fragmentation chain transfer (RAFT) polymerization. The novel BVCT–trifluoroacetic acid adduct play an important role to produce well-defined block copolymers, which is both as a cationogen under EtAlCl₂ initiation system in the presence of ethyl acetate for living cationic polymerization and a RAFT agent for blocks by RAFT polymerization. The resulting polymer, poly(vinyl ether)s, by living cationic polymerization had a high number average α-end functionality (≥0.9) as determined by both ¹H NMR and MALDI-TOF-MS spectrometry. In addition, this poly(vinyl ether)s worked well as a macromolecular chain transfer agent for RAFT polymerization. The RAFT polymerization of radically polymerizable monomers was conducted in toluene using 2,2′-azobis(isobutyronitrile) at 70 °C. For example, a double thermoresponsive block copolymer (MOVE₆₁-b-NIPAM₁₅₀) consisting of 2-methoxyethyl vinyl ether (MOVE) and N-isopropylacrylamide (NIPAM) was prepared via the combination of living cationic polymerization and RAFT polymerization. The block copolymer reversibly formed and deformed micellar assemblies above the phase separation temperature (T_ps) of poly(NIPAM) block in water. This BVCT is not only functioned as an initiator, but also acted as a monomer. When BVCT was copolymerized with MOVE by living cationic polymerization, followed by graft copolymerization with NIPAM via RAFT polymerization, well-defined graft copolymers (MOVE_n-co-BVCT_m)-g-NIPAM_x (n = 62–73, m = 1–9, x = 19–214) were successfully obtained. However, no micelle formed in water above T_ps of poly(NIPAM) graft chain unlike the case of block copolymers.     

Chemical Looping Steam Methane Reforming via Ni-ferrite Supported on Cerium and Zirconium Oxides

Pure hydrogen was produced by means of chemical looping steam methane reforming with novel oxygen carriers. Ni-ferrite, Ni-ferrite-ZrO₂, and Ni-ferrite-CeO₂ were synthesized as oxygen carriers and characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), dynamic light scattering (DLS), and hydrogen temperature-programmed reduction (H₂-TPR). The performances of the as-synthesized oxygen carriers in the cyclic oxidation-reduction were investigated in the packed-bed microreactor at a defined temperature range and under atmospheric pressure. Ni_0.39Fe_2.61O₄-ZrO₂ exhibited the best performance and maximum methane conversion among the other oxygen carriers. In addition, high selectivities for H₂ and CO were reached.     

Modeling industrial thickener using computational fluid dynamics (CFD), a case study: Tailing thickener in the Sarcheshmeh copper mine

Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process. Thickener is key unit in the operational processes of hydrometallurgy and is used to separate solid from liquid. In this study, population balance models were combined with computational fluid dynamics (CFD) for modeling the tailing thickener. Parameters such as feed flow rate, flocculant dosage, inlet solid percent and feedwell were investigated. CFD was used to simulate the industrial tailing thickener with settled bed of 120 m diameter which is located in the Sarcheshmeh copper mine. Important factor of drag force that defines the rake torque of rotating paddles on the bed was also determined. Two phases turbulence model of Eulerian/Eulerian in accordance with turbulence model of k-ε was used in the steady-state. Also population balance model consists of 15 groups of particle sizes with Luo and Lehr kernel was used for aggregation/breakage kernel. The simulation results showed good agreement with the operational data.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.     

Line inductance measurement by using commutation time in line commutated converters

Finding line inductance using wiring diagrams of the network is usually difficult or even impossible. In general, line inductance has to be measured in a simple nondisruptive way without service interruption. Several line inductance measurement techniques have been suggested previously, but they suffer from a number of limitations. In this paper, a novel line inductance measurement technique that uses the current commutation in a line-commutated converter is proposed. An expression for the line inductance as a function of phase-to-phase voltage, utility angle frequency, load current, triggering angle α and commutation time is procured. The line inductance is calculated by recording the commutating current waveforms by means of an accurate oscilloscope and measuring the other required values. Because of its simplicity, diode converter is employed in the experimental circuit when α = 0. The experiment is repeated for the case in which the phase inductances are different, and these phase inductances are calculated. To verify the performance of the proposed line inductance measurement technique, the known inductances are added in series to the line phase inductances. The results obtained show that the line inductance can be measured by the proposed measurement method precisely below 6% error. Finally, the error sources that may be encountered when the proposed method is applied are discussed.     

Pure and mixed gas permeation study of silica incorporated polyurethane-urea membrane modified by MOCA chain extender

Polyurethane-urea (PUU) nanocomposite membranes have been prepared using various loadings of silica (SiO₂) nanoparticles. A Novel PU was fabricated by a two-step bulk polymerization technique based on polycaprolactone (PCL), hexamethylene diisocyanate (HDI), and diamine chain extender, 4,4-methylenebis(2-chloroaniline) (MOCA). The FTIR spectra indicated that the extent of phase separation reduces with increasing SiO₂ content. The presence of crystal regions in the soft and hard segments was confirmed by DSC and XRD analyses. The obtained results illustrated a decrement in the gases' permeation in the presence of SiO₂ particles. By increasing the filler content up to 15 wt% and pressure of 8 bar, the gas permeation value of the CO₂, O₂, and N₂ decreased 36%, 54%, and 59%, respectively. However, the permselectivity of the CO₂/N₂ and O₂/N₂ increased considerably, 55% and 13% respectively. On the contrary, by raising the temperature, a dramatic augmentation in the permeability of all gases with a simultaneous reduction in the selectivity values of both gas pairs was revealed. Increasing the pressure led to a decrease in the permeability values of all membranes for O₂ and N₂, whereas the permeability for CO₂ increased with the pressure. Nevertheless, the selectivity values for the pair of gases increased (at a pressure of 10 bar, 1.66 and 1.17 times the neat PU for CO₂/N₂ and O₂/N₂, respectively). Furthermore, the permeability of the CO₂, O₂, and N₂ for the mixed gases was smaller than for pure ones at the same gas upstream pressure. Nonetheless, like the pure gas, the selectivity of both pair gases increased.     

Electrical and mechanical properties of BZT − xBCT lead-free piezoceramics

In this study, lead-free (1 − x)Ba(Zr_0.2Ti_0.8)O₃ − x(Ba_0.7Ca_0.3)TiO₃ compositions are synthesized via conventional solid oxide route, and the ceramics are fabricated with normal sintering in air. The effects of composition fluctuations on dielectric, piezoelectric, and mechanical properties are investigated. The phase structure and the microstructure are analyzed with X-ray diffraction and scanning electron microscopy. The best dielectric and piezoelectric properties of ε_r = 11 207 and d₃₃ = 330 pC/N were obtained for BZT−0.35BCT and BZT−0.5BCT ceramics, respectively. The mechanical behavior—in terms of Vickers hardness and compressive and flexural strengths—was investigated, and the best mechanical behavior was found in the vicinity of the phase transition boundary with x values between 0.5 and 0.6.