天然气管网吸附调峰可行性的模拟研究

A lo9adleveling method through adsorption was presented to adjust the supply quantity according to the consumption rate of natural gas with time,An experimental simulation set up was designed and used to test the load-leveling function for a real pipline system.A storage tank filled with activated carbon together with a filter constitutes the major part of the load-leveling facility,Pressure and temperature of the system,as well as the real gas output of the storage tank were recorded.It is proven that load-leveling by adsorption in technically feasible even for low pipeline pressure of natural gas supply system.     

故障树分析法在CCFWM故障诊断中的应用

本文介绍了利用故障树分析法分析CCFWM故障,以CCFWM的典型故障为例,建立故障树,通过求解最小实际故障来进行定性分析.此方法方便、简洁、直观、实用.     

低门尼黏度氢化丁腈橡胶的制备

用不同牌号的丁腈橡胶(NBR)N 32和N 21加入液体丁腈橡胶(LNBR)以及自由基捕获剂制备低门尼黏度氢化丁腈橡胶(HNBR),考察了制备HNBR的影响因素,并与进口HNBR的性能进行了对比。结果表明,用质量比分别为60/30/10/0.3和40/50/10/0.3的N 32/N 21/LNBR自/由基捕获剂作为加氢基础胶,在铑络合物催化剂的用量为180×10-6、氢化压力为7 MPa、温度为80℃的条件下氢化10h,可获得氢化度大于90%、门尼黏度为70~80的HNBR产品;选择含—NH—的防老剂作自由基捕获剂,有利于提高HNBR的氢化度和降低门尼黏度;所制备的HNBR硫化胶的物理机械性能、耐热老化性能与进口产品相当。     

基于B／S模式的建筑工程材料管理信息平台

利用先进的网络技术,针对建筑工程材料规范化管理的现实需求和未来发展,设计并实现一个基于B／S模式的建筑工程材料管理信息平台。文章设计了基于B／S方式的建筑工程材料管理信息系统,具体讨论了系统功能划分及作用,以及实现过程中涉及的关键技术。     

The linear regression method for improving magnetic parameter of the electroless CoFeB films

The kinetics equation of deposition rate was implemented to help explain some of the mechanisms responsible for structures observed during the deposition of CoFeB films on poly-ester plastic. The plating rate of electroless CoFeB films is a function of concentration of sodium tetrahydroborate, pH of the plating bath, plating temperature and the metallic ratio. The estimated regression coefficient, confidence interval, residual error and confidence interval were confirmed by computer program. The optimal composition of the plating bath was obtained and the dynamic electromagnetic parameters of films were measured in the 2-10 GHz range. At 2 GHz, the permeability, magnetic loss of the electroless CoFeB films were 304,76.6 respectively as the concentration of reducer is 1 g·L^-1.     

Electrochemical and anti‐corrosion behaviors of water dispersible graphene/acrylic modified alkyd resin latex composites coated carbon steel

A type of water dispersible graphene (PG) has been synthesized by nucleophilic ring‐opening reaction of the primary amine group in 3‐(1‐(2‐aminopropoxy) propan‐2‐ylamino) propane‐1‐sulfonate sodium (PPS) with epoxy groups on the basal plane of graphene oxide (GO), followed by in situ reduction with hydrazine hydrate. The PG is employed as nanoscale reinforcement fillers in waterborne acrylic modified alkyd resin (AMAR) coatings. The stability and corrosion resistance of the waterborne PG/AMAR nanocomposite coatings are investigated. SEM and stability of nanocomposite indicated that the PG sheet is uniformly distributed in AMAR nano‐emulsion. Potentiodynamic polarization and electrochemical impedance spectroscopy studies indicated that the PG/AMAR composite coatings exhibit higher corrosion resistance in simulated body fluid (SBF) compared with pure AMAR coatings and GO/AMAR coatings. In addition, the stability and corrosion resistance of the composite materials reach optimum when the PG content is 1%. PPS functionalized graphene (PG) displays prospective application in anticorrosion field. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44445.     

抗老化助剂对尼龙6耐老化性能的影响

通过热氧老化评估了不同抗氧剂对尼龙6(PA6)耐黄变性能的影响,优选一组效果较好的抗氧剂作为基础抗氧剂配方。通过QUV 340 nm加速老化实验,分别评估了添加不同光稳定剂的PA6样品老化后其色差(△E)、黄色指数变化值(△YI)及拉伸强度保留率随时间的变化情况;通过长期热氧老化实验分别评估了样品在不同温度下,其△E、△YI及拉伸强度保留率随时间的变化情况。结果表明:Sunox508/Sunox626抗氧体系中加入光稳定剂会降低抗氧剂效果,其中加入Sunovin 5524/Sunovin 770影响最小。     

短纤维增强丁腈橡胶复合材料性能的研究

研究几种短纤维部分替代炭黑对丁腈橡胶(NBR)复合材料性能的影响。结果表明:非极性聚酯短纤维胶料的FL和Fmax较小,刚性芳纶短纤维胶料的FL和Fmax较大;与无短纤维胶料相比,短纤维胶料的t10较长,门尼粘度较低,硬度较大,300%定伸应力和拉伸强度较低;沿短纤维取向垂直方向比沿短纤维取向方向胶料的拉伸强度和拉断伸长率较低;短纤维在NBR胶料中的取向程度及其胶料刚性和硬度由大到小的顺序为:芳纶短纤维、聚酯短纤维、聚酰胺纤维和纤维素短纤维;芳纶短纤维胶料的抗撕裂性能较好,聚酯短纤维胶料的综合性能较好;短纤维胶料易发生屈服,短纤维易成为材料破坏的应力集中点。     

大型基础承台水化热分析与裂缝控制

以一个工程为例,利用程序MASSIVE,从影响温度及应力大小的几个方面对基础承台进行了详细的模拟计算分析,找出了产生裂缝的具体原因,文中的分析和计算结果对类似基础承台的设计与施工有一定的参考价值。     

基于随机模糊理论的断路器寿命评估方法

断路器投运后会经历多次正常分合闸操作与故障跳闸,实时准确探知其损坏程度是变电运维人员的关注重点。文中提出了一种高压断路器寿命评估方法,实现了断路器健康水平动态预测,为运维工作中实时掌握设备健康状态提供了解决方案。基于评估指标在实际中存在随机性与模糊性,引入了随机模糊理论。考虑到评估指标存在多样性以及对设备的影响程度不同,利用所提的改进层次分析法,确定影响断路器健康水平各指标的权重,在此基础上,计算了断路器的健康指数(Health Index,HI),进而构建了断路器的寿命预测模型,最后基于某型断路器的现场数据,对该断路器的分合闸线圈部分进行了寿命预测,证明了所提方法在理论层面的可行性。