Effect of side chain substituents on the electron injection abilities of unsymmetrical perylene diimide dyes

Three near-infrared (NIR) absorbing unsymmetrical perylene diimide D-A-D type dyes containing 6-undecanoxy as donor group were utilized in dye-sensitized nanocrystalline TiO₂ solar cells. Structure of the acceptor side of the molecules were improved by adding 4-[2-methyl-5-(cyanoacrylic acid)-3-thienyl]-phenyl (V), 3-carboxy-2-pyridil (VI) and 3-carboxy-2-pyrazyl (VII) moieties attached to one of the N-side of the dye. The relationship between the molecular structure of the acceptor sites of the dyes and the photovoltaic performances were discussed. Electrochemical measurements indicated that band gaps of the dyes were energetically favorable for electron injection from the excited state of the dyes to the conduction band of TiO₂ nanoparticles. However, three dyes gave lower conversion efficiency on DSSC applications. Strong electron-withdrawing nature of perylene core might not permit to transfer the photo-generated electrons to the carboxyl groups anchoring to TiO₂ surface, and then solar-to-electricity conversion efficiencies of the dyes were reduced.     

Electrostatic energy harvesting by droplet-based multi-phase microfluidics

This paper presents an energy scavenging technique, merging microfluidics with electrostatic energy harvesting. The method employs droplet-based microflow of two phases with different electrical permittivities, resulting in a capacitance change across the microchannel, to harvest electrical energy. The technique is implemented on 3?mm wide, 1?mm deep minichannels. It is shown that 0.4?nW can be harvested using a single electrode pair, with air and water as the two phases flowing at 1?ml/min. The generated power can be increased significantly by microscale implementation, where the number of electrodes can also be increased for further improvement.     

Penetrating Sealants for Concrete Bridge Decks—Selection Procedure

The major parameter controlling the effectiveness of penetrating sealants as a means of protecting concrete bridge deck surface is the depth of penetration. The factors affecting the depth of sealant penetration are identified both through a fundamental approach and with reference to the literature on penetrating sealants, concrete deterioration, durability, and permeability. Penetration properties and the use of silane and siloxane as concrete surface sealers are discussed. The effects of surface cleaning methods and the drying period are discussed. Penetrating sealants are effective if proper surface cleaning and application procedures are employed. However, moisture state within the first 6-mm depth controls the depth of sealant penetration. Thus, the factors that affect the drying period before sealant application are identified. Penetrating sealants selection procedure incorporating available test methods is outlined based on the knowledge gained through the fundamental studies of flow phenomenon and literature.     

Long time stress relaxation of amorphous networks under uniaxial tension: The Dynamic Constrained Junction Model

The constrained junction model that represents the stress-strain relations of amorphous networks in equilibrium is modified to analyze stress relaxation. Deviation of stress from equilibrium when a network is stretched suddenly is represented by a time dependent constraint contribution that is of the same form as that of the equilibrium theory. The time dependent motions of the junctions are assumed to obey the Langevin equation. The only new term in the model is a time dependent κ parameter that vanishes at long times. Results of the model are compared with uniaxial stress relaxation experiments on polyisoprene networks with different degrees of cross-linking. Experiments show that the time dependent κ parameter obeys a stretched exponential form, with β = 0.4 and τ = 40 s, both of which are the same for all extensions and cross-link densities studied. The front factor κ₀ depends on cross-link density in the same way as in the equilibrium case. Comparison with stress relaxation experiments shows satisfactory agreement at a wide range of extensions and for different degrees of cross-linking. The relatively low value of the stretched exponent parameter, β = 0.4, is interpreted in terms of a molecular picture where entanglements contribute to relaxation at a wide spectrum of time scales.     

The effect of D‐glucose on milk clotting activity of Mucor miehei in a chemostat with biomass retention

In this study microbial production of rennin from a commercial strain of Mucor miehei (NRRL 3420) has been accomplished in a continuously fed fermenter. The effects of feed D ‐glucose concentration (2.5–30 g dm⁻³) on milk clotting activity and on other system variables were investigated at optimum mixing and dilution rates of 400 rpm and 0.0052 h⁻¹, respectively, without pH control. Maximum milk clotting activity (1.24 IU cm⁻³) occurred when the feed D ‐glucose concentration was 7.5 g dm⁻³. Enzyme production continued for 500 h, producing a total milk clotting activity of 10 230 IU. At the maximum milk clotting activity point, total protein concentration, milk clotting and proteolytic activities were analysed and compared with those of a commercial rennet. The ratio of milk clotting activity to proteolytic activity, and specific milk clotting activity were determined as 1.55 × 10⁻³ IU PU⁻¹ and 5.28 IU mg⁻¹ medium protein, respectively, denoting similar characteristics to a commercial rennet after concentration of the fermentation medium. © 1999 Society of Chemical Industry     

Preparation and physical/electrochemical characterization of Pt/poly(vinylferrocenium) electrocatalyst for methanol oxidation

Preparation and characterization of a platinum (Pt)-based catalyst using a redox polymer, poly(vinylferrocenium) (PVF⁺), as the support material was described. Pt was obtained from aqueous solution of K₂PtCl₄ in the complex form. Pt particles were reduced by chemical and electrochemical means. Chemical reduction was performed using aqueous hydrazine solution and electrochemical reduction was carried out in H₂SO₄ solution. The Pt/PVF⁺ catalyst system showed catalytic activity towards methanol oxidation. Cyclic voltammetry was used for the electrochemical characterization of the catalyst system. Scanning electron microscopy (SEM) images and energy dispersive X-ray spectrum (EDS) of the catalyst system were also recorded. The system was tested in a single fuel cell configuration at ambient temperature and atmospheric pressure. The open circuit voltage (OCV) was 680 mV for the system and the maximum power density was 0.31 mW cm⁻² at a current density of 0.63 mA cm⁻². Catalytic activity of Pt/PVF⁺ system towards methanol oxidation was comparable with the related catalysts in the literature.     

Using Nutritional Lipid and Sensorial Profiles for the Characterization of Turkish Olive (Memecik X Gemlik cv) Hybrids obtained from Controlled Crossbreeding

Olive breeding is an important method for improving of olive oil quality. In the early 1990’s, a controlled cross breeding project was started on Turkish domestic olive cultivars by Bornova Olive Research Institute, Izmir. This study was carried out with a total of 11 hybrids and 2 parents and these oil samples were obtained from “Memecik” [5 samples (MG) + 1 parent (MEM)] and “Gemlik” [6 samples (GM) + 1 parent (GEM)] domestic olive cultivars grown under the same agronomic and pedoclimatic conditions. In this study, agronomic criteria (ripening index), some nutritional values (total phenolic contents, major fatty acids [palmitic, oleic, linoleic acid, linolenic acid] and their parameters (linoleic/linolenic ratio, quality index), and sensory properties (panel test) of olive (Memecik and Gemlik) hybrid oils were analyzed during 2005–2008 four harvest years. All results showed that 11 advanced domestic olive hybrids had different oil characteristics relative to the parents of hybrids based on nutritional and sensory profiles. The Pearson correlation coefficients and principal components factor loadings observed among chemical/sensory characteristics and fatty acid profile (GM 19, GM 39, MG 11, MG 5 and MG 123 promising hybrids) could be of interest in future olive breeding programs. Considering the main objectives of olive breeding project, the hybrids of GM 19 and MG 5 exhibited superior agronomic (maturation–regular yield), technological–nutritional (high total polyphenol content, balanced omega3/omega6 ratio), and sensorial (high pungent and bitter qualifications) features. The official registrations of these hybrids were carried out by Ministry of Agriculture and Forestry of Turkey.     

The influence of computer-assisted instruction on students’ conceptual understanding of chemical bonding and attitude toward chemistry: A case for Turkey

In this study, the effect of computer-assisted instruction on conceptual understanding of chemical bonding and attitude toward chemistry was investigated. The study employed a quasi-experimental design involving 11 grade students; 25 in an experimental and 25 in a control group. The Chemical Bonding Achievement Test (CBAT) consisting of 15 two-tier questions and the Chemistry Attitude Scale (CAS) consisting of 25 item were the principal data collection tools used. The CBAT and CAS instruments were administered in the form of a pre-test and post-test. Analyses of scores of the two groups in the post-test were compared and a statistically significant difference was found between groups in favor of experimental group. It also seems students from the experimental group were more successful than the control group students in remediation of alternative conceptions. The results of this study suggest that teaching–learning of topics in chemistry related to chemical bonding can be improved by the use of computer-assisted teaching materials.     

Evaluating Enzymatic Productivity—The Missing Link to Enzyme Utility

Kinetic productivity analysis is critical to the characterization of enzyme catalytic performance and capacity. However, productivity analysis has been largely overlooked in the published literature. Less than 0.01% of studies which report on enzyme characterization present productivity analysis, despite the fact that this is the only measurement method that provides a reliable indicator of potential commercial utility. Here, we argue that reporting productivity data involving native, modified, and immobilized enzymes under different reaction conditions will be of immense value in optimizing enzymatic processes, with a view to accelerating biotechnological applications. With the use of examples from wide-ranging studies, we demonstrate that productivity is a measure of critical importance to the translational and commercial use of enzymes and processes that employ them. We conclude the review by suggesting steps to maximize the productivity of enzyme catalyzed reactions.