A latency-aware task scheduling algorithm for allocating virtual machines in a cost-effective and time-sensitive fog-cloud architecture

The Journal of Supercomputing - Recently, with the expansion of communications and generated data, the need for processing this high volume of data in minimum time and maximum speed has increased....     

Conductive multichannel PCL/gelatin conduit with tunable mechanical and structural properties for peripheral nerve regeneration

Peripheral nerve injuries remain among the most challenging medical issues despite numerous efforts to devise methods in fabrication of nerve conduits to functionally regenerate axonal defects. In this regard, the current study offers a holistic perspective in design by considering the mechanical, topographical and structural aspects which are crucial for a successful nerve guide conduit. Poly(e-caprolactone) and gelatin were employed to serve this purpose in the form of dual-electrospun films which were rolled and later shaped the assembly of a multichannel conduit. Polyaniline/graphene (PAG) nanocomposite was incorporated to endow the conduit with conductive properties. FTIR analysis, water contact angle measurements, and SEM observations as well as mechanical and conductivity tests were used to evaluate the properties of the conduits. In addition, MTT assay was conducted to assess the proliferation of rat bone marrow-derived mesenchymal stem cells cultured on the films. Incorporating 2% PAG proved to have superior cell support and proliferation, while guaranteeing electrical conductivity of 10.8 × 10⁻⁵ S/cm and remarkable tensile strength of 3.52 ± 1.3 MPa and 14.12 ± 3.1 MPa for wet and dry conditions, respectively. Overall, the observed results highlight the great potential of the fabricated conduit to be used as a candidate for peripheral nerve defects.     

Ultrasound-promoted one-pot four-component synthesis of novel biologically active 3-aryl-2,4-dithioxo-1,3,5-triazepane-6,7-dione and their toxicity investigation

We have described a novel four-component reaction (4MCR) between oxalyl chloride 1, anilines 2a–h, and two molecules of ammonium thiocyanate 3 in acetone under ultrasound irradiation to give 3-aryl-2,4-dithioxo-1,3,5-triazepane-6,7-diones. A synthetically useful ultrasound effect was observed and title products were obtained in high yields after 15–35?min sonication. Our procedure compared to the conventional heating method has the benefit of higher reaction yields and shorter reaction times. The IR spectra showed the presence of N–H, C═O and C═S groups in these compounds and ¹H, ¹³C NMR and Mass spectral results verified their structures. Cellular investigations showed that these compounds are toxic toward cancer cells.     

Influence of Methanol on Prion Reduction during High Temperature and High Pressure Oleochemical Processes

Prion‐reduction in standard biodiesel processes is caused by acidic and alkaline conditions. In the alternative RepCat biodiesel process, efficient prion‐reduction can be achieved by high‐temperature/pressure. However, a possible increase in thermostability of prions in the presence of methanol during these conditions has not previously been investigated, and is verified in this work. Samples are spiked with prions, treated with methanol, and incubated at 220 °C at 80 bar for 30 min. No traces of protease‐resistant prion protein (as proxy for prions) are detected in tallow or glycerine (as the final by‐product) after treatment. Serial dilutions of spiked prions show at least 6 log₁₀ prion reduction. More importantly, similar effects are detected using milder conditions of 200 °C at 70 bar for 15 min, representing the worst‐case conditions of the process. In conclusion, this study shows that methanol does not increase the thermostability of prions and the RepCat process can efficiently eliminate prions and is therefore safe for the usage of category 1 tallow. Practical Applications: The study further supports the applicability of RepCat process in reducing prion‐contamination in the presence of methanol. Furthermore, the conditions leads to a considerable reduction of prions in glycerine obtained as by‐product.     

Fabricating Janus membranes via physicochemical selective chemical vapor deposition

Membranes with asymmetric wettability-Janus membranes-have recently received considerable attention for a variety of critical applications. Here, we report on a simple approach to introduce asymmetric wettability into hydrophilic porous domains. Our approach is based on the physicochemical-selective deposition of polytetrafluoroethylene (PTFE) on hydrophilic polymeric substrates. To achieve selective deposition of PTFE, we inhibit the polymerization reaction within the porous domain. We prefill the substrates with glycerol, containing a known amount of free radical inhibitor, and utilize initiated chemical vapor deposition (iCVD) for the polymerization of PTFE. We show that the glycerol/inhibitor mixture hinders the deposition of PTFE within the membrane pores. As a result, the surface of the substrates remains open and porous. The fabricated Janus membranes show stable wetting-resistant properties, evaluated through sessile drop contact angle measurements and direct contact membrane distillation (DCMD).     

Extraction optimisation,antioxidant activity and inhibition on α-amylase and pancreatic lipase of polyphenols from the seeds of Syzygium cumini

The objectives of this study were to determine the optimal extraction conditions of polyphenols from Syzygium cumini seeds by response surface methodology and investigate their antioxidant activity and inhibition on α-amylase and pancreatic lipase. As results, the optimal extraction conditions in the ultrasonic extraction process which maximised total polyphenols content, minimised the IC₅₀ values of α-amylase and pancreatic lipase were determined as follows: extraction time 60 min, ethanol concentration 63% and solvent/solid ratio 44 mL g⁻¹. The main phenolic compounds in partially purified fraction of Syzygium cumini seeds were catechin, epicatechin, kaempferol, gallic, 5-caffeoylquinic, caffeic and ferulic acids. In addition, the partially purified fraction inhibited 87.66 ± 5.55 and 86.61 ± 3.15% of α-amylase and pancreatic lipase, respectively. The results suggested that Syzygium cumini seeds could be explored as a natural antioxidant and could be used as a source of highly antidiabetic and anti-obesity bioactive compounds.     

Process Optimization,Physical Properties,and Environmental Stability of an α-Tocopherol Nanocapsule Preparation Using Complex Coacervation Method and Full Factorial Design

α-Tocopherol (α-Toc) has valuable biological activity, but its activity is limited when exposed to environmental factors. Nanocapsules can be used to overcome this problem. Using nanocapsules in the range of 100–200 nm is more beneficial. A 2⁴ full factorial design was carried out to optimize the size of nanocapsules using the complex coacervation method. The four factors were the amount of the wall material, the ratio of core material to wall material, the pH of the solution, and the speed of the homogenizer. The smallest nanocapsules (176 nm) were obtained at a wall content (gelatine and pectin) of 0.8 mg, a percentage of core material (α-Toc) to wall material of 20%, a pH = 4.5, and a homogenizer speed of 12,000 rpm. The encapsulation efficiency was 90.6 ± 1.1%, and the encapsulation yield was 83.4 ± 1.6%. Assessment of the stability of α-Toc after 1 month showed that encapsulation could improve its stability in the presence of three influential factors: humidity, light, and temperature.     

Preparation, Characterization and Photocatalytic Properties of Ba-Cd-Sr-Ti Doped Fe3O4 Nanohollow Spheres on Removal of Congo Red Under Visible-Light Irradiation

In this study, Ba-Cd-Sr-Ti doped Fe₃O₄ nanohollow spheres were successfully prepared via a simple solvothermal method. The crystal size, structure, morphology and elemental analysis of the as-prepared sample were investigated in detail by X-ray diffraction (XRD), FT-IR, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, respectively. Magnetic hysteresis measurement was carried out on a vibrant sample magnetometer (VSM) showing the soft ferromagnetic property at room temperature. The synthesized nanohollow spheres were employed as a photocatalyst to study the photocatalytic degradation of dye contaminations. The UV-Vis results showed that the specimen could well catalyze the decolorizing of congo red (CR) solution and a removal efficiency of 99.5 % was obtained at pH 6. The optical characteristic of the products was studied by estimating the band-gap energy based on diffuse-reflectance spectroscopy (DRS) which represented the doped magnetite with semiconductor metals to be more prone in the visible region as compared to UV region. Some factors such as initial dye concentration, pH, and contact time influencing the decomposition of CR were evaluated.