Manufacture of dry‐ and brine‐salted soft camel cheeses for the camel dairy industry

Two experiments were conducted in a camel cheese study to (i) compare camel cheese to bovine cheese made from bovine milk standardised to simulate camel milk, and (ii) describe the technology for manufacture of dry (SCC‐D) and brine‐salted soft camel cheese (SCC‐B). Comparable cheese yield (camel: 7.4 ± 0.15, cow: 7.3 ± 0.55 kg/100 kg of milk) and levels of dry matter loss in whey were observed. Clotting time was 234 s for both cheeses which were made using thermophillic starters. Cheese yield was 9.31 ± 0.64 kg/100 kg with 425.6 ± 38.2 g/kg cheese dry matter for SCC‐D and 8.22 ± 0.90 kg/100 kg with 469 ± 73.8 g/kg dry matter for SCC‐B.     

Annealing effect on structural, optical and electrical properties of pure and Mg doped tin oxide thin films

This study describes the effect of annealing at different temperatures (400–600 °C) on structural, optical and electrical behaviors of pure and Mg doped tin oxide thin films grown on the glass substrate by electron beam evaporation technique. The transformation of tetragonal to orthorhombic form due to annealing, introduced a change in the optical and electrical properties of pure and Mg doped tin oxide thin films. X-ray diffraction studies or analysis revealed the phase transformation and change in the crystalline size with increase in the annealing temperature. The morphology and roughness of the thin films were studied by Atomic force microscopy. Optical band gap increased with annealing temperature confirms the improvements of crystallinity. The quality of thin films transparency was investigated by UV/Vis-spectroscopy. Photoluminescence of pure and Mg doped tin oxide thin films shows two extra peaks one at 486 nm and other at 538 nm is due to the crystal defect created as a result of annealing temperature. These peaks became stronger and shifted to longer wavelength with increasing the annealing temperature. The complex plot (Nyquist plot) showed the data point laying on two semicircles and the resistance of grains and grain boundaries increases with the increase in annealing temperature for both pure and Mg doped tin oxide thin films.     

基于IFS确定性迭代算法的麦粒分形组织设计法

针对L系统在绘制织物分形组织图方面存在的局限,运用IFS的确定性迭代算法生成规则,结合计算机图形方法,提出了一种分形组织图的纹织效果设计方法。该设计方法以复杂变化组织中的麦粒组织为基础组织,基于IFS生成具有自相似结构的分形组织图,然后选择不同形式的组织为填充组织,从而获得具有特殊纹理效果的分形织物组织图。结合纺织CAD技术,借助电子提花机进行了相应的组织织造实验,对设计形成风格新奇的织物组织的新方法进行了初步的探讨。     

Preparation of spherical macroporous silica in an aerosol phase

Macroporous silica (MS) and macro/mesoporous silica (MMS) were prepared by spray drying a polystyrene (PS) latex sol containing a silica source, followed by calcination. As a silica source, 3-aminopropyl triethoxysilane (APS) was used for MS while either silica sol (SS) or tetraethoxyothosilicate using P123 templating (P123-TEOS) was used for MMS. Spray drying and calcination could also take place in a once-through aerosol reactor. The transformation of the silicon alkoxides to silica and decomposition of PS occurred at similar temperatures. Therefore, for APS-originated MS, the metal additives such as silver and nickel were required to accelerate the former. In addition, the nickel was well dispersed in the silica matrix during calcination even at 800 °C, in turn to thermally stabilize the porous structures. The wall-preforming additives were unnecessary for PS/SS and PS/P123-TEOS, since the SS drying and P123 templating, respectively, took place at lower temperature than PS decomposition. The porosities of all the porous silica prepared ranged from 0.54 to 0.57, which were close to the volume fraction of PS in the PS-alkoxides mixture solidified right after spray drying.     

A new texture and shape based technique for improving meningioma classification

Over the past decade, computer‐aided diagnosis is rapidly growing due to the availability of patient data, sophisticated image acquisition tools and advancement in image processing and machine learning algorithms. Meningiomas are the tumors of brain and spinal cord. They account for 20% of all the brain tumors. Meningioma subtype classification involves the classification of benign meningioma into four major subtypes: meningothelial, fibroblastic, transitional, and psammomatous. Under the microscope, the histology images of these four subtypes show a variety of textural and structural characteristics. High intraclass and low interclass variabilities in meningioma subtypes make it an extremely complex classification problem. A number of techniques have been proposed for meningioma subtype classification with varying performances on different subtypes. Most of these techniques employed wavelet packet transforms for textural features extraction and analysis of meningioma histology images. In this article, a hybrid classification technique based on texture and shape characteristics is proposed for the classification of meningioma subtypes. Meningothelial and fibroblastic subtypes are classified on the basis of nuclei shapes while grey‐level co‐occurrence matrix textural features are used to train a multilayer perceptron for the classification of transitional and psammomatous subtypes. On the whole, average classification accuracy of 92.50% is achieved through the proposed hybrid classifier; which to the best of our knowledge is the highest. Microsc. Res. Tech. 77:862–873, 2014. © 2014 Wiley Periodicals, Inc.     

Automated Sequential Injection Method for Determination of Caffeine in Coffee Drinks

An automated sequential injection analysis spectrophotometric assay for the determination of purine alkaloids in coffee drinks was developed. The sample was treated with a carrez reagent for matrix suppression followed by filtration; subsequently, alkaloids were separated from organic acids using a short C18 monolithic column (10 × 4.6 mm). The flow rate of the separation step was 10 μL s^?1 with 10% v/v of methanol as the mobile phase. The sum of alkaloids evaluated as caffeine was detected at 274 nm. The influence of the main parameters affecting the quantification of purine alkaloids was optimized. One sample analysis lasted 15 min when aspirated in triplicate. The linear range was 1–15 mg L^?1, and the determination coefficient (r ²) was 0.9969. The limit of detection and limit of quantitation were 0.128 and 0.425 mg L^?1, respectively. The repeatability evaluated as the relative standard deviation (RSD) was 3.58% (n = 12, 10 mg L^?1). Under optimal conditions, the method was successfully applied to determine purine alkaloids in different real samples including soluble coffee, coffee from an espresso machine, and brewed coffee drinks.     

Osmoresistant yeast Zygosaccharomyces rouxii: the two most studied wild-type strains (ATCC 2623 and ATCC 42981) differ in osmotolerance and glycerol metabolism

The yeast Zygosaccharomyces rouxii is known for its high tolerance to osmotic stress, which is thought to be caused by sets of specific genes. Relatively few Z. rouxii genes have been identified so far, all of them having homologues in Saccharomyces cerevisiae; none of them was Z. rouxii-specific. Most of the known Z. rouxii genes were isolated from two wild-type strains, ATCC 2623 and ATCC 42981. In this study, we compared these two strains with regard to some of their morphological, physiological and genomic properties. Important differences were found in their salt tolerance and assimilation of glycerol and karyotype; slight differences were also present in their cell morphology. The ATCC 42981 strain showed a higher resistance to salts, higher glycerol production and, unlike ATCC 2623, was able to assimilate glycerol. Under conditions of osmotic stress, the glycerol production in both Z. rouxii strains was much lower than in a S. cerevisiae S288c culture, which suggested the presence of a system that efficiently retains glycerol inside Z. rouxii cells. The karyotype analysis revealed that ATCC 42981 cells contain more chromosomes and have a bigger genome size than those of ATCC 2623.