Physicochemical properties of pre-treated cuttlebone powder and its potential as an alternative calcium source

This study was aimed to investigate the potential use of pre-treated cuttlebone powder (CBP) as an alternative calcium source by evaluating the physicochemical properties of CBP pre-treated with distilled water (CBP1), 1% acetic acid (CBP2), and 2% sodium hydroxide (NaOH) solutions (CBP3). Proximate analysis revealed ash as the major component of all samples. The presence of phenols, flavonoids, alkaloids, and glycosides were detected but tannins appeared to be absent in cuttlebones. Mineral analysis indicated that CBP was rich in calcium, which means the material may be considered as a potential calcium source for food products or calcium supplements. The bulk density of CBP2 was significantly lower (p < .05) than those of CBP1 and CBP3, and the water holding capacity (WHC) of CBP1 was significantly higher (p < .05) than those of CBP2 and CBP3. The high bulk density, water and oil holding capacities of CBP demonstrated its potential use as a functional food ingredient.     

Optimisation of digestion method for determination of arsenic in shrimp paste sample using atomic absorption spectrometry

The microwave digestion method was developed and verified for the determination of arsenic in shrimp paste samples. Experimental design for five factors (HNO₃ and H₂O₂ volumes, sample weight, microwave power and digestion time) were used for the optimisation of sample digestion. For this purpose, two level half factorial design, which involves 16 experiments, was adopted. The concentration of arsenic was analysed by graphite furnace atomic absorption spectrometry. Design Expert® 7.0 software was used to interpret all data obtained. The combination of 2 mL HNO₃ and 1 mL H₂O₂ volumes, 0.1 g sample weight, 1400 W power and 5 min digestion time was found to be the optimum parameters required to digest the shrimp paste samples. Tests with spiked samples presented good recoveries with relative standard deviations between 0.32% and 5.35%.     

Oil palm bunch ripeness classification using fluorescence technique

Oil palm is Malaysia’s major agriculture product and it covers approximately 5 million hectares of Malaysia’s land. Limited land resources have been an important factor that motivated the need to increase oil extraction rate (OER). OER of oil palm fresh fruit bunches (FFB) depends highly on their maturity stage. The ripe oil palm FFB will produce high OER while the under ripe and over ripe oil palm FFB will produce less oil. Thus, this paper presents a method of classification between oil palm FFB into ripe, under-ripe and over-ripe categories. This research was done at an oil palm plantation in peninsular Malaysia. A total of two-hundred and ten oil palm FFB that consist of seventy bunches for each category of under-ripe, ripe and over-ripe had been used. Each bunch was scanned ten times randomly with a hand-held multi-parameter fluorescence sensor called Multiplex®3. The parameter measured was the Blue-to-Red Fluorescence Ratio (BRR_FRF) obtained from blue-green (447 nm) and far-red (685 nm) emission signal by using ultraviolet (UV) light emitting diode as excitation light source. The novel contribution of this research is to prove that the oil palm FFB maturity can be determined using the Blue-to-Red Fluorescence ratio index. This is based to our finding of a significant difference among the three categories of ripeness based on the parameter. Classification and Regression Tree (C&RT) method was proposed in this paper. Hundred-fifty samples were used to develop the model by trained it using C&RT method and the remaining sixty samples for the test component. By using the C&RT method, the results show the best accuracy of overall testing classification is 90%. This research will be useful for future development of non-destructive, automatic and real time oil palm FFB grading system.     

Bovidae-based gelatin: Extractions method,physicochemical and functional properties,applications, and future trends

Gelatin is one of the most important multifunctional biopolymers and is widely used as an essential ingredient in food, pharmaceutical, and cosmetics. Porcine gelatin is regarded as the leading source of gelatin globally then followed by bovine gelatin. Porcine sources are favored over other sources since they are less expensive. However, porcine gelatin is religiously prohibited to be consumed by Muslims and the Jewish community. It is predicted that the global demand for gelatin will increase significantly in the future. Therefore, a sustainable source of gelatin with efficient production and free of disease transmission must be developed. The highest quality of Bovidae-based gelatin (BG) was acquired through alkaline pretreatment, which displayed excellent physicochemical and rheological properties. The utilization of mammalian- and plant-based enzyme significantly increased the gelatin yield. The emulsifying and foaming properties of BG also showed good stability when incorporated into food and pharmaceutical products. Manipulation of extraction conditions has enabled the development of custom-made gelatin with desired properties. This review highlighted the various modifications of extraction and processing methods to improve the physicochemical and functional properties of Bovidae-based gelatin. An in-depth analysis of the crucial stage of collagen breakdown is also discussed, which involved acid, alkaline, and enzyme pretreatment, respectively. In addition, the unique characteristics and primary qualities of BG including protein content, amphoteric property, gel strength, emulsifying and viscosity properties, and foaming ability were presented. Finally, the applications and prospects of BG as the preferred gelatin source globally were outlined.     

Enhancement of Red Pigment Production by Monascus purpureus FTC 5391 through Retrofitting of Helical Ribbon Impeller in Stirred-Tank Fermenter

The possibility of using a novel proximity type half-pitched, double-flight helical ribbon impeller (HRI) for the improvement of red pigment production by Monascus purpureus FTC5391 was investigated in a 2-L stirred-tank fermenter (STF). For comparison, the fermentations were also carried out in STF equipped with the industrial standard six-bladed Rushton turbines (RT). The selection of aeration and agitation strategies in STF were based on possible attainable oxygen transfer at the start of fermentation using derived empirical power law model to predict the initial volumetric oxygen transfer coefficient (k _L a). The final pigment concentration, yield, and productivity obtained in optimized fermentation employing a single HRI agitated at 250 rpm and air flow rate of 2.25 L/min (1.5 vvm) was 24.36 UA₅₀₀, 0.47 UA₅₀₀/g glucose, and 0.20 UA₅₀₀/h, respectively. These values were about 76%, 78%, and 96% higher than those obtained in STF fitted with RT, respectively. In terms of impeller power consumption, the HRI system was favorable for batch cultivation of M. purpureus as pigment yield per energy invested was 2.5 times higher than the RT.     

Modeling Growth Rate and Assessing Aflatoxins Production by Aspergillus flavus as a Function of Water Activity and Temperature on Polished and Brown Rice

Abstract: The aim of this study was to model the radial growth rate and to assess aflatoxin production by Aspergillus flavus as a function of water activity (a_w 0.82 to 0.92) and temperature (12 to 42 °C) on polished and brown rice. The growth of the fungi, expressed as colony diameter (mm) was measured daily, and the aflatoxins were analyzed using HPLC with a fluorescence detector. The growth rates were estimated using the primary model of Baranyi, which describes the change in colony radius as a function of time. Total of 2 secondary models were used to describe the combined effects of a_w and temperature on the growth rates. The models were validated using independent experimental data. Linear Arrhenius–Davey model proved to be the best predictor of A. flavus growth rates on polished and brown rice followed by polynomial model. The estimated optimal growth temperature was around 30 °C. A. flavus growth and aflatoxins were not detected at 0.82 a_w on polished rice while growth and aflatoxins were detected at this a_w between 25 and 35 °C on brown rice. The highest amounts of toxins were formed at the highest a_w values (0.90 to 0.92) at a temperature of 20 °C after 21 d of incubation on both types of rice. Nevertheless, the consistencies of toxin production within a wider range of a_w values occurred between 25 to 30 °C. Brown rice seems to support A. flavus growth and aflatoxin production more than the polished rice. Practical Application: The developed models can be used to estimate to what extent the change in grain ecosystem conditions affect the storage stability and safety of grains without the need for running long‐standing storage study. By monitoring the intergranular relative humidity and temperature at different locations in the storage facility and inputting these data into the models, it is directly possible to assess either the conditions are conductive for the growth of A. flavus or aflatoxin production.     

Monovalent cation transporters at the plasma membrane in yeasts

Maintenance of proper intracellular concentrations of monovalent cations, mainly sodium and potassium, is a requirement for survival of any cell. In the budding yeast Saccharomyces cerevisiae, monovalent cation homeostasis is determined by the active extrusion of protons through the Pma1 H⁺-ATPase (reviewed in another chapter of this issue), the influx and efflux of these cations through the plasma membrane transporters (reviewed in this chapter), and the sequestration of toxic cations into the vacuoles. Here, we will describe the structure, function, and regulation of the plasma membrane transporters Trk1, Trk2, Tok1, Nha1, and Ena1, which play a key role in maintaining physiological intracellular concentrations of Na⁺, K⁺, and H⁺, both under normal growth conditions and in response to stress.