Optical properties of evaporated Ge20Se80−x Tl x thin films

Chalcogenide glasses with composition Ge₂₀Se_80–x Tl _x (x=10, 15, 20, 25, 35%) have been prepared by the usual melt-quenching technique. Thin films of the mentioned compositions have been prepared by the electron beam evaporation. In addition, another set taken from the composition ofX=30 at % with different thicknesses (d=14.7, 30.0, 56.5, 70.0, 101.0, 180.0 nm) have been taken into consideration. The X-ray diffraction (XRD) analysis revealed the amorphous nature of the prepared films. It was found that, in contrast to the optical gap (E _op), both the extent of the band tailing (B), and the band gap (E _e) increase with increasing thallium content. In other side,E _op showed thickness independency. The refractive index (n) showed obvious dependence on both composition and thickness also on the energy of the incident radiation.     

A 50-MS/s (35 mW) to 1-kS/s (15 /spl mu/W) power scaleable 10-bit pipelined ADC using rapid power-on opamps and minimal bias current variation

A novel rapid power-on operational amplifier and a current modulation technique are used in a 10-bit 1.5-bit/stage pipelined ADC in 0.18-/spl mu/m CMOS to realize power scalability between 1 kS/s (15 /spl mu/W) and 50 MS/s (35 mW), while maintaining an SNDR of 54-56 dB for all sampling rates. The current modulated power scaling (CMPS) technique is shown to enhance the power scaleable range of current scaling by 50 times, allowing ADC power to be varied by a factor of 2500 while only varying bias currents by a factor of 50. Furthermore, the nominal power is reduced by 20%-30% by completely powering off the rapid power-on opamps during the sampling phase in the pipeline's sample-and-holds.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

Risk Assessment in Construction

This study is concerned with the assessment of risk for major construction activities. Risk has been defined as a measure of the probability, the severity, and the exposure of all hazards of an activity. A risk assessor model (RAM) was developed and computerized to determine the risk associated with a particular activity and the justification factor for a proposed remedy. Knowing the value of risk would help contractors identify the high risk of major construction activities and would enable them to allocate safety precautions in a more efficient manner.     

A retrograde fluorescent-labeling study of direct relationship between the limbic (anterodorsal and anteroventral thalamic nuclei) and the visual system in the albino rat

Case-control methodology was used to assess lung cancer risk from exposure to arsenic in air, employing data from former workers in different units at the Chuquicamata copper mine and smelter complex. Thirty two workers from this complex were identified among the lung cancer deaths that occurred in the Northern region of Chile between 1987 and 1991. Each case was matched on age and sex, with controls that had a similar date of enrolment in the company. Available data on arsenic concentrations in air for six work sites were compiled from 1952 to 1991 and these were used to categorize the workplaces: Administrative area (1.6 micrograms/m3), Mine (2.3 micrograms/m3), Oxid Plant (3.1 micrograms/m3), Workshop and Services (9.8 micrograms/m3), Sulphur Plant (8.4 micrograms/m3) and Smelter (201.7 micrograms/m3). The results indicate an Odds Ratio of 5.7 (Fisher's p = 0.016) of dying from lung cancer among workers of the smelter compared with the rest of the workers.     

Excimer laser-facilitated angioplasty for undilatable coronary narrowings

Calcified and fibrotic coronary artery lesions cannot always be dilated with conventional balloon angioplasty even at high pressures. This study examines the success of excimer laser facilitated angioplasty in 38 lesions in 37 patients with lesions that failed balloon angioplasty alone.     

Gelling of alginate fibres

Equipment was developed to measure the time for complete gelling of sodium alginate fibres in calcium chloride solution, taken as the time to achieve maximum tensile strength. The effects of fibre diameter, alginate concentration, alginate composition and calcium chloride concentration on gelling time were investigated. A diffusional model, developed to predict the gelling time, agreed with experimental results except for the effect of calcium ion concentration which was modelled empirically.     

Simulation of leachate migration in leaky aquifers

A two-dimensional cross-section finite difference model is presented to simulate density dependent leachate migration in leaky aquifers. Unlike existing models, a new approach is adopted to couple the groundwater-flow equation and the hydrodynamic dispersion equation with the elimination of the intermediate step of calculating velocities. The concept of the reference density is employed, permitting increased accuracy (over pressure-based models) in the representation of the transport process. The model is then used to study the effect of several hydraulic and transport parameters on the flow pattern and plume migration which are found to be very sensitive to most of these parameters. Equiconcentration and equipotential lines are overlapped to provide a better understanding of the coupling effect.