Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

Remarks on the Surface Area and Equality Conditions in Regular Forms. Part I: Triangular Prisms

This work presents four mathematical remarks concluded from the mathematical analysis for the interrelationships between the dependent and independent variables that control the measures: perimeter, floor area, walls surface area and total surface area in the regular forms that have a given volume. Such forms include prismatic and pyramidal forms. The work consists of four parts, of which this first part presents the remarks of the isosceles triangular right prism. The first remark examines the effect of θ, the angle of the triangular base, on the total surface area. The second remark calculates the minimum total surface area in two cases, depending on whether angle θ is constant or variable. The third remark calculates the walls ratio and the critical walls ratio. The last remark studies the required conditions for the numerical equality in two cases, where the perimeter is equal to the area, and where the total surface area is equal to the volume.     

Effects of cobalt and potassium doping on thermal stability and electrical properties of radiation grafted acrylic acid onto poly(tetrafluoroethylene ethylene) copolymer films

Grafted copolymer of poly(tetrafluoroethylene ethylene) (ET) with acrylic acid (AAc) was prepared by direct radiation method. The obtained films were modified by treating with small amounts of Co²⁺ and K⁺ ions (1.0 wt %). The effects of such treatment on the thermal stability and electrical conductivity of these films were studied. Cobalt treatment did not much affect the thermal degradation of the films. The results obtained revealed that k⁺ treatment enhanced the thermal degradation of ET‐g‐PAAc, which started 273 K lower than that observed in the case of the untreated and Co²⁺‐treated films. Potassium and cobalt treatment of the investigated films increased their electrical conductivity (σ) and decreased the activation energy ΔE_σ. The increase in σ values was, however, more pronounced in the case of K⁺‐treated film. These results were discussed in terms of the effective increase in the hydrophilicity of the films, especially those treated with potassium. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 867–871, 2005     

Distributed control of nonlinear diffusion systems by input–output linearization

This paper addresses the distributed control by input–output linearization of a nonlinear diffusion equation that describes a particular but important class of distributed parameter systems. Both manipulated and controlled variables are assumed to be distributed in space. The control law is designed using the concept of characteristic index from geometric control by using directly the PDE model without any approximation or reduction. The main idea consists in the control design in assuming an equivalent linear diffusion equation obtained by use of the Cole–Hopf transformation. This framework helps to demonstrate the closed‐loop stability using some concepts from the powerful semigroup theory. The performance of the proposed controller is successfully tested, through simulation, by considering a nonlinear heat conduction problem concerning the control of the temperature of a steel plate modeled by a nonlinear heat equation with Dirichlet boundary conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Oil thermal annealed nano‐structured indium tin oxide thin films for display applications

Indium tin oxide‐coated thin films (200 nm) are deposited on glass substrates by using R.f. sputtering technique. Here, we investigate the influence of new technique of treatment, which is called as “oil thermal annealing” on the nano‐structured indium tin oxide thin films at fixed temperature (150 °C) which improves adhesion strength, electrical conductivity and optical properties (transmittance) of the films. Oil thermal annealing is used to reduce inherent defects that may be introduced during the prepared thin film and cooling processes. Proposed technique is highly suitable for liquid crystal displays, solar cells and organic light emitting diodes, and many other display‐related applications.     

Thermodynamics of ionic-association in aqueous solutions of Ca and Mg organic salts using ion-selective electrode technique—II. benzoate, o-toloate, o-chlorobenzoate and salycylate

The stoichiometric association constants, K, the thermodynamic association constant, K_A, and the other thermodynamic parameters such as ΔS°, ΔH° and ΔG° for the association between each of the Ca and Mg ions with benzoate, o-toloate, o-chlorobenzoate and salycylate have been determined at 25°C, 35°C and 45°C in aqueous media. Ion-selective electrode technique has been used in the measurements of Ca and Mg ion activitiesThe trend of association behavior of both Ca and Mg aromatic salts could not be explained on the basis of pK_a of the mother organic acids but could be explained based on the trend of Hammet function σ of these salts themselves relative to the corresponding benzoate salt.     

Volatile compounds of original African black and white shea butter from Tchad and Cameroon

Shea butter is used as an edible vegetable fat in many African countries. It can be utilized as a substitute or complete replacement for cocoa butter in various applications and plays an important role in traditional African medicinal practice. Although detection of volatile compounds by solid‐phase micro‐extraction gas‐chromatography mass‐spectroscopy (SPME‐GC‐MS) is a very reliable and reproducible technique, which can be used as an important part of authenticity checking, production monitoring and contamination detection, no published data about volatile compounds of shea butter are available so far. In this investigation, the characteristic volatiles in the headspace of original African shea butter samples were identified by using SPME‐capillary‐GC coupled to a mass selective detector. Almost 100 different volatile components were identified, e.g. fatty acids, saturated and unsaturated aldehydes and ketones, terpenes, and typical Maillard reaction products such as methylfuranes and pyrazines. Furthermore, the samples have been olfactorily evaluated by a panel of professional flavorists and trained analytical chemists. It can be stated that variations in processing conditions of shea butter result in considerable differences in the composition of headspace volatiles, detected by SPME‐GC‐MS and human olfaction.     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

MIRRE approach: nonlinear and multimodal exploration of MIR aggregated search results

Multimedia Tools and Applications - Nowadays, web users frequently explore multimedia contents to satisfy their information needs. The exploration approaches usually provide linear interaction...