Struktur und eigenschaften von ABS-polymeren. IX. Quantitative untersuchungen zur morphologie von ABS-polymerisaten

The technological properties of ABS polymers largely depend on the structure of the elastomer phase as well as on the elastomer/thermoplast interface. The morphological structure of such polymers can be determined from electron micrographs of ultramicrotome sections – after selective contrasting of the polybutadiene phase – or of replicas of fracture surfaces after selective chemical degradation. The various ABS polymers are classified by their manufacturing processes and their morphologies and characterized by electron micrographs. The degree and place of grafting are of particular importance. The quantitative determination of the surface- and internal grafting is achieved by combining the determination of the degree of grafting (extraction), the evaluation of the results obtained on particle counting, and a morphometric process. It is demonstrated that the morphometric process can in general be applied for the quantitative determination of the contrastable component in two-phase polymers.     

Lifetime assessment of epoxies by the kinetics of thermal degradation

The kinetics of thermal degradation of 4,4′‐diaminodiphenylsulfone (DDS)‐cured glycidylethers (DGBA) and glycidylamines (TGDDM) have been studied by isothermal annealing. Thermal degradation proceeds via first‐order kinetics with activation energies of 138 (DGBA/DDS) and 95 kJ/mol (TGDDM/DDS). From these data the temperature‐dependent lifetime can be calculated. Based on the heat distortion temperature and 20 years' service as criteria, the upper service temperature is found to be around 115–120°C. In spite of the different activation energies and bond stabilities, only marginal differences in the upper allowed service temperatures between these resins were found. Only slight improvements can be expected by optimizing the cure conditions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1881–1886, 2004     

13C n.m.r. study of raw materials for carbon black

¹³C n.m.r. spectroscopy has been applied to investigate a number of coal tar and petroleum-derived carbon black feedstocks. Application of the J-modulated spin echo technique is especially rewarding, as this method renders the quaternary carbons directly detectable. Thus the quality of carbon black feedstocks can additionally be gauged on the basis of the contents of quaternary carbons, which is a direct indication of the carbon yield in the carbon black production process.     

Organolithium route to poly(arylsilane)s

Various poly(arylsilane)s The poly(carbosilane)s prepared in this way are of higher molecular weight than when prepared by the Wurtz-type condensation route previously reported. TG shows 40–50% overll weight loss attained at 500–600°C.     

β-Carotene transport in human lipoproteins. Comparisons with a-tocopherol

The purpose of this study was to investigate the temporal relationships of the transport of β-carotene in human lipoproteins. We administered 60 mg β-carotene with breakfast to nine fasting subjects, then blood samples were collected at intervals of up to 75 h, lipoproteins were isolated, and β-carotene was quantitated. β-Carotene concentrations in chylomicrons and very low density lipoproteins (VLDL) peaked at 6 and 9 h, respectively. Nonetheless, at all time points the majority of plasma β-carotene was contained in low density lipoproteins (LDL), while high density lipoproteins (HDL) carried a smaller portion (at 24 h, 73±8% in LDL as compared with 23±5% in HDL). In three subjects, transport of β-carotene was compred with the results of earlier studies on the transport of stereoisomers of α-tocopherol. Unlike plasmaRRR-α-tocopherol concentrations, which are maintained by the preferential incorporation ofRRR-α-tocopherol into VLDL by the liver, β-carotene increased and decreased in VLDL similarly toSRR-α-tocopherol, a stereoisomer whose concentrations are not maintained in plasma. In conclusion, β-carotene is primarily transported in the plasma in LDL, but its incorporation by the liver into lipoproteins does not appear to be enhanced.     

Gewinnung von Brennstoff für Kraftwerke aus Klärschlamm

Production of a combustible for coal-fired power stations based on sewage sludge . This article describes various means of achieving more extensive mechanical dewatering of sewage sludges. The heat content of the sludge solids can become available for combustion processes. The sludge filter cakes obtained by the “CarboSed” process can be disposed of with minimum energy consumption by fluidized bed combustion or be used after appropriate work-up as a combustible in coal-fired power stations with full exploitation of their heat content for generation of steam and electric current. Partial substitution of primary energy sources such as coal and fuel oil by sludge filter cake is feasible in all cases. The processes thus make a contribution to the saving of energy resources and the disposal of sludge.     

Stereoisomere Aromastoffe

Zusammenfassung Die Synthese von acht verschiedenen 2-Alkoxy-5-alkyl-tetrahydrofuranen und ihren Stereoisomeren wird vorgestellt, sieben von ihnen sind als Aromastoffe der Wassermelone bekannt. Alle Stereoisomeren werden, ausgehend von optisch reinen-Nonalacton-Enantiomeren, synthetisiert und mit Diisobutylaluminiumhydrid selektiv zu den entsprechenden Lactolen reduziert. Die Lactole werden mit den gewünschten Alkoholen in schwach saurer Lösung zucis/trans-Diastereomeren umgesetzt und durch Flüssigchromatographie in optisch reine Stereoisomere getrennt. Die sensorische Charakteristik aller Stereoisomeren der sieben Verbindungen wird aufgezeigt. Die Trennung dercis/trans-Diastereomeren an DB-210 wird vorgestellt und die chirospezifische Differenzierung der acht Verbindungen diskutiert.

---

Stereoisomeric flavour compounds L. Optically pure 2-alkoxy-5-alkyl-tetrahydrofurans — structures and properties

Summary The synthesis of eight different 2-alkoxy-5-alkyltetrahydrofurans and their stereoisomers is presented, seven of which are known to be flavour compounds of water melons. All stereoisomers were synthesized from optically pure-lactone enantiomers, which were selectively reduced by diisobutylaluminium hydride to the corresponding lactols. The lactols were treated with the desired alcohol component in weakly acidic media to yield thecis/trans diastereoisomers, which were separated into optically pure stereoisomers by liquid chromatography. The sensory characteristics of all four stereoisomers of the seven compounds are given. The Stereodifferentiation of thesecis/trans diastereoisomers on DB-210 is demonstrated and the direct chirospecific differentiation of all eight compounds discussed.

     

On the detection of custom memory allocators in C binaries

Many reverse engineering techniques for data structures rely on the knowledge of memory allocation routines. Typically, they interpose on the system’s malloc and free functions, and track each chunk of memory thus allocated as a data structure. However, many performance-critical applications implement their own custom memory allocators. Examples include webservers, database management systems, and compilers like gcc and clang. As a result, current binary analysis techniques for tracking data structures fail on such binaries. We present MemBrush, a new tool to detect memory allocation and deallocation functions in stripped binaries with high accuracy. We evaluated the technique on a large number of real world applications that use custom memory allocators. We demonstrate that MemBrush can detect allocators/deallocators with a high accuracy which is 52 out of 59 for allocators, and 29 out of 31 for deallocators in SPECINT 2006. As we show, we can furnish existing reverse engineering tools with detailed information about the memory management API, and as a result perform an analysis of the actual application specific data structures designed by the programmer. Our system uses dynamic analysis and detects memory allocation and deallocation routines by searching for functions that comply with a set of generic characteristics of allocators and deallocators.     

Batch sequencing and cooperation

Game theoretic analysis of sequencing situations has been restricted to manufacturing systems which consist of machines that can process only one job at a time. However, in many manufacturing systems, operations are carried out by batch machines which can simultaneously process multiple jobs. This paper aims to extend the game theoretical approach to the cost allocation problems arising from sequencing situations on systems that consist of batch machines. To analyze the allocation problem at hand, it focusses on the existence of core elements, convexity, and the Shapley value.