Ranking of refrigerants

Environmental ranking of refrigerants is of need in many instances. The aim is to assess the relative environmental hazard posed by 40 refrigerants, including those used in the past, those presently used, and some proposed substitutes. Ranking is based upon ozone depletion potential, global warming potential, and atmospheric lifetime and is achieved by applying the Hasse diagram technique, a mathematical method that allows us to assess order relationships of chemicals. The refrigerants are divided into 13 classes, of which the chlorofluorocarbons, hydrofluorocarbons, hydrochlorofluorocarbons, hydrofluoroethers, and hydrocarbons contain the largest number of single substances. The dominance degree, a method for measuring order relationships among classes, is discussed and applied to the 13 refrigerant classes. The results show that some hydrofluoroethers are as problematic as the hydrofluorocarbons. Hydrocarbons and ammonia are the least problematic refrigerants with respect to the three environmental properties.     

Electron-beam treatment of aromatic hydrocarbons that can be air-stripped from contaminated groundwater. 2. Gas-phase studies

The electron-beam (EB) degradation of volatile aromatics (benzene, toluene, ethylbenzene, xylenes: BTEX) in groundwater strip gas, which in the present work has been modeled by the introduction of the desired aromatic(s) to a stream of air or another gas, such as oxygen, is initiated essentially by the addition of *OH radicals to the aromatic ring, giving rise to hydroxycyclohexadienyl radicals, which form the corresponding peroxyl radicals upon addition of oxygen. As studied in some detail with benzene as a BTEX representative, various reactions of these lead to numerous oxidation products in a cascade of reactions, including the decomposition of products under the prevailing conditions of high turnover of the initial aromatic. Importantly, hydroxycyclohexadienylperoxyl radical formation is partly reversible, and the reactions of the hydroxycyclohexadienyl radicals, which thus have a significant presence in these systems, must therefore also be taken into consideration. In the gas phase, in contrast to the aqueous phase (see Part 1), the reactions of the hydroxycyclohexadienyl radicals lead to oligomeric products that appear to contribute, in addition to ionic clusters, to nucleation for the aerosols observed. Various nitrated products, among them nitrophenols, are observed when air is used for the stripping. However, these studies did not clear the pilot plant stage, since BTEX degradation using a bioreactor carried out in parallel was so successful that the EB technology was judged to be noncompetitive. As for the latter, expensive equipment consisting of a stripper, the EB machine, and an aerosol precipitator would be required. The condensed aerosols are biorefractory and would require further treatment for detoxification.     

Low‐Cost Post‐Growth Treatments of Crystalline Silicon Nanoparticles Improving Surface and Electronic Properties

Freestanding silicon nanocrystals (Si‐ncs) offer unique optical and electronic properties for new photovoltaic, thermoelectric, and other electronic devices. A method to fabricate Si‐ncs which is scalable to industrial usage has been developed in recent years. However, barriers to the widespread utilization of these nanocrystals are the presence of charge‐trapping defects and an oxide shell formed upon ambient atmosphere exposure hindering the charge transport. Here, we exploit low‐cost post‐growth treatment routes based on wet‐etching in hydrofluoric acid plus surface hydrosilylation or annealing enabling a complete native oxide removal and a reduction of the defect density by up to two orders of magnitude. Moreover, when compared with only H‐terminated Si‐ncs we report an enhancement of the conductivity by up to a factor of 400 for films of HF etched and annealed Si‐ncs, which retain a defect density below that of untreated Si‐ncs even after several months of air exposure. Further, we demonstrate that HF etched and hydrosilylated Si‐ncs are extremely stable against oxidation and maintain a very low defect density after a long‐term storage in air, opening the possibility of device processing in ambient atmosphere.     

Ex vivo and in vivo Evaluation of [18F]PR04.MZ in Rodents: A Selective Dopamine Transporter Imaging Agent

N‐4‐Fluorobut‐2‐yn‐1‐yl‐2β‐carbomethoxy‐3β‐phenyltropane (PR04.MZ) has been developed as dopamine transporter (DAT) ligand for molecular imaging. It contains a terminally fluorinated, conformationally constrained nitrogen substituent that is well suited for the introduction of fluorine‐18. The present report describes the pharmacological characterisation of [¹⁸F]PR04.MZ. The ligand shows an IC₅₀ value of 2 nM against human DAT, whereas the IC₅₀ value against human serotonin transporter and human noradrenalin transporter are lower (110 nM and 22 nM , respectively). Furthermore, its ex vivo organ distribution, its binding profile in the rat brain and reversibility of binding were examined. A μPET study illuminates a fast kinetic profile and specific binding to rat DAT.     

Bildung von oxydischen Einschlüssen in halbberuhigtem Stahl

Untersuchung von 20-t-Blöcken mit unterschiedlichen Aluminiumzugaben für die Feindesoxydation während der Erstarrung in der Kokille. Oberflächenfehler von halbberuhigtem Stahl. Bildung von oxydischen Einschlüssen dicht unter der Blockoberfläche und im Blockinnern. Maßnahmen zur Beeinflussung der Einschlußausbildung.     

Beobachtungen zur Oberflächenveränderung durch-Erosion und Kavitation

Observations of the effect on surfaces of “erosion and cavitation” With the cavitation of material due to liquids, the meterial is damaged by blowholes. In addition, observations on highgloss polished pure metals, tested in H. Schröter's and O. Walchner's flow apparatus with weir and counter-weir, occasionally showed damage caused by small particles of solids entrained by the liquid. In order to simulate mechanical damage by small particles, steel shot of different edge lengths was entrained with the liquid so as to bit the surface of the specimen. The results were lines of sliding in the case of Armco iron and mechanical twinning in the case of zine. An energy comparison is then carried out between the entrained solid particles and the blowhole. Solid particles with a maximum energy content theoretically equal to the minimum energy content of a blowhole are able to cause a plastic deformation of the surfaces of materials within minute zones, whilst blowholes with equal energy content obviously do not cause any mechanical damage. This indicates the need, with metallographic investigations into initial damage by flow cavitation, to ensure adequate filtering of the test medium so as to preclude the possibility of sand erosion.     

Polymers containing formamidine groups

Summary Aliphatic polyformamidines have been synthesized by reaction of aliphatic diamines with triethyl orthoformate in presence of catalytic amounts of acetic acid. The reaction has been carried out in DMSO at 180°C. The polymer structure has been confirmed by IR and NMR spectroscopy. For determination of molecular weights ¹H NMR end group signals have been used.     

Anisotropic plasticity model coupled with strain dependent plastic strain and stress ratios

It is necessary to describe properly anisotropic material behavior for realistic numerical analyses of sheet metal forming processes. The implementation of many yield criteria in finite element analysis is very complicated. Various material tests are also required to determine yield function coefficients. Stress ratios and anisotropy coefficients are not constant during forming processes due to deformation induced anisotropy. This paper introduces a yield function using strain dependent plastic strain ratios and stress ratios. The main advantage is to fully utilize the data of uniaxial tensile tests. The described material behavior shows a significantly improved agreement with experimental data.