Effect of Dyebath Additives on Decolorization Efficiency in the Ozonation of Dyehouse Effluent

It is necessary to study the effect of dyebath additives on decolorization efficiency in order to optimize ozone-based decolorization processes as the consumption of ozone can be reduced through selecting ozone favorable additives. The effect of 5 dyebath additives viz. electrolytes (sodium chloride and sodium sulfate), chelating agent (ethylene diamine tetra acetic acid or EDTA), reducing agent (sodium dithionite), optical brightener (Uvitex BHT), and dispersing agent (Zetex DNVL) was investigated. All of the additives showed synergistic effect as addition of sodium chloride, sodium dithionite and Zetex DN-VL markedly improved decolorization efficiency, but EDTA and optical brightener showed negative effect. Sodium sulfate did not show any positive or negative effect on decolorization efficiency.     

Using a virtual environment to assess cognition in the elderly

Early diagnosis of Alzheimer’s disease (AD) is essential if treatments are to be administered at an earlier point in time before neurons degenerate to a stage beyond repair. In order for early detection to occur tools used to detect the disorder must be sensitive to the earliest of cognitive impairments. Virtual reality technology offers opportunities to provide products which attempt to mimic daily life situations, as much as is possible, within the computational environment. This may be useful for the detection of cognitive difficulties. We develop a virtual simulation designed to assess visuospatial memory in order to investigate cognitive function in a group of healthy elderly participants and those with a mild cognitive impairment (MCI). Participants were required to guide themselves along a virtual path to reach a virtual destination which they were required to remember. The preliminary results indicate that this virtual simulation has the potential to be used for detection of early AD since significant correlations of scores on the virtual environment with existing neuropsychological tests were found. Furthermore, the test discriminated between healthy elderly participants and those with a MCI.     

Decolourisation of aqueous dyes by sequential oxidation treatment with ozone and Fenton's reagent

Combined oxidation with ozone and Fenton's reagent (‘Fentozone’ process) for decolourisation of aqueous dyes was studied and compared with traditional Fenton's reagent. Although the ‘Fentozone’ process was found to be effective at a wide range of pH values, the maximum colour removal was achieved at pH 4. The effect of pre‐ozonation on colour removal efficiency of aqueous dyestuffs in the subsequent treatment with Fenton's reagent was investigated. The reaction kinetics using water‐soluble acid and reactive dyes were also studied. Our experimental results show that pre‐ozonation can considerably accelerate decomposition of dyestuffs in the subsequent treatment with Fenton's reagent. Different concentrations of ferrous sulfate were used to investigate their influences on the removal of colour. The rate of reaction increased with increasing doses of ferrous sulfate. © 2002 Society of Chemical Industry     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Brain tumor classification using deep convolutional autoencoder-based neural network: multi-task approach

Diagnosis, detection and classification of tumors, in the brain MRI images, are important because misdiagnosis can lead to death. This paper proposes a method that can diagnose brain tumors in the MRI images and classify them into 5 categories using a Convolutional Neural Network (CNN). The proposed network uses a Convolutional Auto-Encoder Neural Network (CANN) to extract and learn deep features of input images. Extracted deep features from each level are combined to make desirable features and improve results. To classify brain tumor into three categories (Meningioma, Glioma, and Pituitary) the proposed method was applied on Cheng dataset and has reached a considerable performance accuracy of 99.3%. To diagnosis and grading Glioma tumors, the proposed method was applied on IXI and BraTS 2017 datasets, and to classify brain images into six classes including Meningioma, Pituitary, Astrocytoma, High-Grade Glioma, Low-Grade Glioma and Normal images (No tumor), the all datasets including IXI, BraTS2017, Cheng and Hazrat-e-Rassol, was used by the proposed network, and it has reached desirable performance accuracy of 99.1% and 98.5%, respectively.

     

Infrared thermography for inspecting the adhesion integrity of plastic welded joints

This work aim at developing a non-destructive tool for the evaluation of bonded plastic joints. The paper examines infrared thermographic transmission and reflection mode imaging and validates the feasibility of the thermal NDT approach for this application. Results demonstrate good estimation performance for adhesion integrity, uniformity and bond strength using a transmission mode application of infrared thermography. In addition, results from a pulsed infrared thermographic application using a modified dynamic infrared tomography scheme show good performance for estimating adhesion layer thickness mapping and detecting delaminations.     

Studying the needed effort for identifying duplicate issues

Many recent software engineering papers have examined duplicate issue reports. Thus far, duplicate reports have been considered a hindrance to developers and a drain on their resources. As a result, prior research in this area focuses on proposing automated approaches to accurately identify duplicate reports. However, there exists no studies that attempt to quantify the actual effort that is spent on identifying duplicate issue reports. In this paper, we empirically examine the effort that is needed for manually identifying duplicate reports in four open source projects, i.e., Firefox, SeaMonkey, Bugzilla and Eclipse-Platform. Our results show that: (i) More than 50 % of the duplicate reports are identified within half a day. Most of the duplicate reports are identified without any discussion and with the involvement of very few people; (ii) A classification model built using a set of factors that are extracted from duplicate issue reports classifies duplicates according to the effort that is needed to identify them with a precision of 0.60 to 0.77, a recall of 0.23 to 0.96, and an ROC area of 0.68 to 0.80; and (iii) Factors that capture the developer awareness of the duplicate issue’s peers (i.e., other duplicates of that issue) and textual similarity of a new report to prior reports are the most influential factors in our models. Our findings highlight the need for effort-aware evaluation of approaches that identify duplicate issue reports, since the identification of a considerable amount of duplicate reports (over 50 %) appear to be a relatively trivial task for developers. To better assist developers, research on identifying duplicate issue reports should put greater emphasis on assisting developers in identifying effort-consuming duplicate issues.     

An empirical study of integration activities in distributions of open source software

Reuse of software components, either closed or open source, is considered to be one of the most important best practices in software engineering, since it reduces development cost and improves software quality. However, since reused components are (by definition) generic, they need to be customized and integrated into a specific system before they can be useful. Since this integration is system-specific, the integration effort is non-negligible and increases maintenance costs, especially if more than one component needs to be integrated. This paper performs an empirical study of multi-component integration in the context of three successful open source distributions (Debian, Ubuntu and FreeBSD). Such distributions integrate thousands of open source components with an operating system kernel to deliver a coherent software product to millions of users worldwide. We empirically identified seven major integration activities performed by the maintainers of these distributions, documented how these activities are being performed by the maintainers, then evaluated and refined the identified activities with input from six maintainers of the three studied distributions. The documented activities provide a common vocabulary for component integration in open source distributions and outline a roadmap for future research on software integration.     

A General Robust MPC Design for the State‐Space Model: Application to Paper Machine Process

Applying model predictive control (MPC) in some cases such as complicated process dynamics and/or rapid sampling leads us to poorly numerically conditioned solutions and heavy computational load. Furthermore, there is always mismatch in a model that describes a real process. Therefore, in this paper in order to prevail over the mentioned difficulties, we design a robust MPC using the Laguerre orthonormal basis in order to speed up the convergence at the same time with lower computation adding an extra parameter “a” in MPC. In addition, the Kalman state estimator is included in the prediction model and accordingly the MPC design is related to the Kalman estimator parameters as well as the error of estimations which helps the controller react faster against unmeasured disturbances. Tuning the parameters of the Kalman estimator as well as MPC is another achievement of this paper which guarantees the robustness of the system against the model mismatch and measurement noise. The sensitivity function at low frequency is minimized to tune the MPC parameters since the lower the magnitude of the sensitivity function at low frequency the better command tracking and disturbance rejection results. The integral absolute error (IAE) and peak of the sensitivity are used as constraints in optimization procedure to ensure the stability and robustness of the controlled process. The performance of the controller is examined via the controlling level of a Tank and paper machine processes.