Hydrogen production from the methanolysis of ammonia borane by Pd-Co/Al2O3 coated monolithic catalyst

The aim of this study is to enable high hydrogen production yield from catalytic methanolysis of ammonia borane (AB) in the presence of a cordierite type ceramic monolithic. The monolithic channel surfaces were coated with Al₂O₃ by wash-coating method and then this layer was impregnated with 1 wt%Pd-2 wt%Co bimetallic catalyst. SEM-EDX and multi-point BET analysis were used in order to characterize the catalyst. The experimental studies were conducted in a continuous flow type reactor, which was used for the first time in this study. The reactions were carried on low temperature (40 °C), and with various AB feed concentrations and flow rates. It was found that the highest hydrogen production yield (88.5%) was obtained from AB flow rate of 3.3 mL/min, and AB feed concentration of 0.1 wt%. It was concluded that Pd-Co/Al₂O₃ coated monolithic, which is a stable, active and low-cost catalyst, was a very promising catalyst for on-board hydrogen production from the methanolysis of ammonia borane.     

Valorization of Olive Pomace Oil with Enzymatic Synthesis of 2‐Monoacylglycerol

2‐Monoacylglycerols (2‐MAG) with a high content of oleic acid at sn‐2 position was synthesized by enzymatic ethanolysis of refined olive pomace oil, which is a byproduct of olive oil processing. Six lipases from different microbial sources were used in the synthesis of 2‐MAG. Immobilized lipase from Candida antarctica gave the highest product yield among the selected lipases. Response surface methodology was applied to optimize reaction conditions; time (4 to 10 h), temperature (45 to 60 °C), enzyme load (10 to 18 wt%), and ethanol:oil molar ratio (30:1 to 60:1). The predicted highest 2‐MAG yield (84.83%) was obtained at 45 °C using 10 (wt%) enzyme load and 50:1 ethanol:oil molar ratio for 5 h reaction time. Experiments to confirm the predicted results at optimum conditions presented a 2‐MAG yield of 82.54%. The purification yield (g 2‐MAG extracted/100 g of total product) was 80.10 and 69.00 for solvent extraction and low‐temperature crystallization, respectively. The purity of the synthesized 2‐MAG was found to be higher than 96%.     

Synthesis, electrochemistry and in situ spectroelectrochemistry of soluble lead phthalocyanines

The synthesis, characterization and voltammetric and spectroelectrochemical properties of newly synthesized lead phthalocyanines bearing tetra-(1,1-(dicarbpenthoxy)-2-(4-biphenyl)-ethyl), tetra-(1,1-(dicarbpenthoxy)-2-(1-naphthyl)-ethyl and tetra-((1,1,2-(tricarbopentoxyethyl)) substituents have been presented in this work for the first time. The characterization of the complexes was made by elemental analysis, ¹H NMR, FT-IR, UV-vis and Maldi-TOF. The solution redox properties and spectroelectrochemical investigation of the complexes are studied using various electrochemical techniques in DCM on a platinum electrode. Cyclic voltammetry and differential pulse voltammetry studies show that the complexes give three one-electron ligand-based reductions and two one-electron oxidation couples having diffusion-controlled mass transfer character. Assignments of the redox couples were confirmed by spectroelectrochemical measurements. Spectroelectrochemical studies reveal that all complexes are demetallized during the spectroelectrochemical measurement under the applied potentials at the first reduction and oxidation potentials of the complexes. Different ring substituents of the complexes affect the easy demetallization processes of the complexes.     

From heterogeneous to homogeneous nucleation of isotactic poly(propylene) confined to nanoporous alumina

The crystallization of highly isotactic polypropylene confined in self-ordered nanoporous alumina is studied by differential scanning calorimetry. A transformation from a predominantly heterogeneous to predominantly homogeneous nucleation takes place if the pore diameter is smaller than 65 nm. Crystallization is suppressed with decreasing pore size, and the absence of nucleation below 20 nm pores indicates the critical nucleus size. The results reported here might enhance the understanding of nanocomposites containing semicrystalline polymers and reveal design criteria for polymeric nanofibers with tailored mechanical and optical properties.     

Nanostructuring polymeric materials by templating strategies

This contribution summarizes efforts in designing, assembling/synthesizing, and structurally and functionally characterizing nanostructured materials using anodized aluminum oxide (AAO) as a thin-film template. Optical waveguide spectroscopy, using a nanoporous template as the guiding structure, is a particularly powerful analytical tool. The layer-by-layer approach for the fabrication of multilayer assemblies is shown to allow the fabrication of nanotube arrays. In addition to using dendrimers as building blocks, semiconducting nanomaterial (e.g., quantum dot) hybrid architectures with very interesting photophysical properties can be assembled. These can be employed, for example, in biosensing applications. Other strategies for using the AAO layers as templates include the growth of polymeric nanorod arrays from different functional monomers, which, after the dissolution of the template, are still able to guide light. This opens up novel concepts for integrated optics platforms with nanostructured materials.     

Antioxidant activities of organic grape, pomace, juice, must, wine and their correlation with phenolic content

The highest values of antioxidant activity (AOA), inhibition of low‐density lipoproteins (LDL‐diene, LDL‐MDA) and total phenols were determined in pomace (82.30 and 82.60%), grapes (68.91%) and must [2750 mg L^?1 gallic acid equivalents (GAE)], respectively. For all parameters (AOA, iLDL‐diene, iLDL‐MDA, total phenols) the highest values were obtained in Cabernet Sauvignon and Merlot grape varieties. Positive correlations were determined between AOA and iLDL‐diene (r = 0.809); AOA and total phenols (r = 0.528); total phenols and iLDL‐diene (r = 0.451) with significance of P < 0.005. The results of principal component analysis demonstrated that the location of iLDL‐diene and AOA is the same for pomace, must and red wines. The total phenols are found in the same place in red wines, red grapes, pomace and must. The results emphasize the importance of must, pomace and red wine for inhibiting LDL‐oxidation.     

Transient protein-protein interactions

Transient complexes are crucial for diverse biological processes such as biochemical pathways and signaling cascades in the cell. Here, we give an overview of the transient interactions; the importance of transient interactions as drug targets; and the structural characterization of transient protein-protein complexes based on the geometrical and physicochemical features of the transient complexes' interfaces. To better understand and eventually design transient protein-protein interactions (TPPIs), a molecular perspective of the protein-protein interfaces is necessary. Obtaining high-quality structures of protein-protein interactions could be one way of achieving this goal. After introducing the association kinetics of TPPIs, we elaborate on the experimental techniques detecting TPPIs in combination with the computational methods which classify transient and/or non-obligate complexes. In this review, currently available databases and servers that can be used to identify and predict TPPIs are also compiled.     

Effects of structural parameters on compressibility and soiling properties of machine woven carpets

Compressibility performance of the machine woven carpet after a static or dynamic loading expresses the texture deformation tendency of the carpet. This study is an experimental attempt to investigate the effects of pile height and pile density on compressibility and soiling property by dynamic loading, prolonged heavy static loading, compression recovery and artificial soiling tests. In this study, a total of 12 carpet samples with three different pile heights and four different pile densities were tested. As a result of this study, it was seen that higher pile density provides a lower thickness loss and so a lower level of texture deformation. On the other hand, pile height has a preventing effect for texture deformation for static loading and compression recovery tests whereas there is no considerable effect on dynamic loading test. There is no considerable difference between the soiling properties of the samples.     

The Effect of Antibacterial Particle Incorporation on the Mechanical Properties,Biodegradability, and Biocompatibility of PLA and PHBV Composites

The composites based on polylactide (PLA) and poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) with the addition of antibacterial particles: silver (Ag) and copper oxide (CuO) are characterized. Basic mechanical properties and biodegradation processes, as well as biocompatibility of materials with human cells are determined. The addition of Ag or CuO to the polymers do not significantly affect their mechanical properties, flammability, or biodegradation rate. However, several differences between the base materials are observed. PLA‐based composites have higher tensile and impact strength values, while PHBV‐based ones have a higher modulus of elasticity, as well as better mechanical properties at elevated temperatures. Concerning biocompatibility, each of the tested materials support the growth of fibroblasts over time, although large differences are observed in the initial cell attachment. The analysis of hydrolytic degradation effects on the structure of materials shows that PHBV degrades much faster than PLA. The results of this study confirm the good potential of the investigated biodegradable polymer composites with antibacterial particles for future biomedical applications.     

Investigation of the Thermal Behavior of Polypyrrole/Carbon Nanotube Composites and Utilization as Capacitive Material or Support for Catalysts

In this study, polypyrrole (PPy)/carbon nanotube (CNT) composites were synthesized by in situ chemical oxidative polymerization of a pyrrole monomer on CNT. Two different types of CNT having different structural properties were used. The composites were characterized using BET surface area analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) techniques. Thermal decomposition kinetics of PPy/CNT composites was studied by thermal gravimetric analysis techniques (TG/DTG (differential thermal gravimetric)) at different heating rates (2.5, 5, 7.5, and 10?K min^?1). Kinetic parameters of the composites were obtained from the TG and DTG curves using the Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) models. The electrochemical capacitive properties of the composites were investigated by the cyclic voltammetry (CV) technique. Pt nanoparticles were decorated on the plain CNTs and composite materials via the microwave irradiation method.