Bitterstoffe beim Erhitzen von Saccharose, Maltose und Prolin 2. Mitteilung

Summary In addition to the mono- and dipyrrolidinohexosereductones described recently (Z Lebensm Unters Forsch (1984) 178:356) two further bittertasting compounds were isolated from heated mixtures of proline and sucrose (molar ratio 3: 1, 190 °C, 30 min) and also synthesized, namely 2,3-bis-(1-pyrrolidinyl)2-cyclopenten-l-one and 2,3-bis(1-pyrrolidinyl)-5methyliden-2-cyclopenten-l-one. The recognition thresholds (mmol/1) are 0.15–0.25 and 0.06–0.12 respectively. Both compounds have a burning bitter taste character. From a maltose-proline reaction mixture 2--glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-one was isolated. When the dihydroxypyranone VI was heated with proline, 2,5-dihydroxy-5-methyl-4-prohnyl-2-cyclopenten-1-one and the cyclopent(b)azepinones XI and XII were among the compounds formed. These compounds also have a bitter taste character.Zusammenfassung Zusätzlich zu den kürzlich beschriebenen Mono- and Dipyrrolidinohexosereduktionen (Z Lebensm Unters Forsch (1984) 178:356) wurden zwei weitere bittere Verbindungen aus erhitzten Mischungen von Prolin and Saccharose (Molverhältnis 3:1, 190 °C, 30 min) isoliert and synthetisiert. Es handelt sich um 2,3-Bis-(1-Pyrrolidinyl)-2-cyclopenten-1-on und 2,3-Bis-(1-Pyrrolidinyl)-5-methyliden-2-cyclopenten-1-on. Die Erkennungsschwellenwerte (mmol/1) sind 0,15-0,25 and 0,06-0,12. Beide Verbindungen haben einen brennend-bitteren Geschmack. Aus einem Maltose-Prolin-Umsetzungsgemisch gelang die Isolierung des 2--Glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-ons. Bei der Reaktion des Dihydropyranons VI mit Prolin wurden u. a. das 2,5-Dihydroxy-5-methyl-4-prolinyl2-cyclopenten-1-on sowie die Cyclopent(b)azepinone XI and XII gebildet. Diese Verbindungen sind ebenfalls mehr oder weniger stark bitter.     

Accumulation of nitrite and sulfite in yeast cells and synergistic depletion of the intracellular ATP content

Summary When nitrite or sulfite are applied to yeast cells below pH 5.0, an enormous intracellular accumulation occurs. It is assumed that nitrite and sulfite penetrate the cell membrane in their undissociated forms as nitrous acid (pK = 3.3) or sulfurous acid (pK =1.8), respectively. Due to the neutral intracellular pH they are trapped inside the cell in their anionic forms, which are impermeable to the cell membrane. It has previously been shown that sulfite causes a rapid depletion of the ATP content of yeast cells [Schimz, K. L. and Holzer, H. (1979) resp. Hinze et al. as above]. Similarly, millimolar concentrations of nitrite decrease the ATP level to less than 10% of the initial value. Nitrite and sulfite in combination deplete the ATP content of yeast cells much stronger than expected for the sum of the separate effects of these compounds (synergistic effect).

---

Akkumulation von Nitrit und Sulfit in Hefezellen und synergistischer Abfall des intrazellulären ATP-Gehalts

Zusammenfassung Wenn Hefezellen mit Nitrit oder Sulft bei pH-Werten unter 5,0 inkubiert werden, beobachtet man eine starke intracelluläre Akkumulation von Nitrit, bzw. Sulfit. Es ist anzunehmen, daß Nitrit und Sulfit in ihrer undissoziierten Form als salpetrige Säure (pK=3,3) bzw. schweflige Säure (pK=1,8) penetrieren und dann in den Zellen durch Neutralisation zu den anionischen Formen, die die Zellmembran nicht mehr permeieren können, abgefangen werden. Ähnlich dem früher beschriebenen raschen Abfall des ATP-Gehaltes nach Zusatz von Sulfit in Hefe [Schimz, KL und Holzer H (1979) Arch Microbiol 121:225–229] und in Bakterien [Hinze H, Maier K, Holzer H (1981) Z Lebensm Unters Forsch 172:389-392] verursacht auch Nitrit einen raschen Abfall des ATP-Gehaltes in Hefe auf weniger als 10 % des Anfangswertes. Werden Nitrit und Sulfit in Kombination verabreicht, so beobachtet man einen wesentlich stärkeren Abfall des ATP-Gehaltes als er aus der Summe der Einzeleffekte von Nitrit, bzw. Sulfit zu erwarten wäre (Synergistischer Effekt).

     

Control of yeast neutral trehalase by distinct polyphosphates and ribonucleic acid

Summary The activity of yeast trehalase when assayed at pH 7 in a crude extract was found to increase 2- to 3-fold upon incubation with 0.1 % (v/v) polyethyleneimine or other polycations such as polylysine (0.075-mMol) and calf thymus histories (0.08 mMol). Incubation with 3 mM-Mn²⁺ and 5 mM-Ca²⁺ also led to 3- and 1.6-fold increases in trehalase activity, respectively. The activities of 11 other enzymes assayed in the crude yeast extract did not increase after addition of polyethylene imine. At concentrations of polyethylenemine that maximally stimulated trehalase activity, 97% of the total RNA present in the crude extract, 40% of total protein, and 60% of the polyphosphate (assayed as inorganic phosphate liberated during 7 min incubation at 95 °C and pH O) were found to be precipitated. A similar finding was made with trehalase-stimulating concentrations of Mn²⁺. Activation of trehalase by polyethylene imine rendered this enzyme susceptible to inhibition by a preparation of total yeast RNA, inorganic polyphosphates, and related polyanions. We present further evidence that the removal of a distinct RNA and/or polyphosphate is the basic principle of polyetyleneimine-induced activation of trehalase.A more pronounced stimulation of trehalase activity (4-fold) could be obtained by enzymatic phosphorylation with ATP in the presence of cyclic AMP and Mg²⁺ as described by van Solingen and van der Plaat (1975) [9]. Thus, trehalase 2-fold activated by polyethylene imine was further activated by another 2-fold increase by enzymatic phosphorylation. Conversely, no additional stimulation by polyethylene imine was obtained for the maximally active, phosphorylated enzyme. We conclude that phosphorylation-mediated activation of trehalase is a two-step event, one being the removal of an inhibitor, which can be achieved by polyethylene imine or related cations independent on phosphorylation. The most likely candidate for the inhibitor appears to be a distinct RNA.

---

Kontrolle der neutralen Hefen-Trehalase durch bestimmte Polyphosphate und RNA

Zusammenfassung Die in einem rohen Extrakt aus Hefe bei pH 7 gemessene Aktivität von Trehalase nimmt bei der Inkubation mit 0,1% Polyethylenimin oder mit anderen Polykationen, wie Polylysin (0,075 mmol) oder Histon aus Kalbsthymus (0,08 mmol) auf das zwei- bis dreifache zu. Auch die Inkubation mit 3 mmol Mn²⁺ oder 5 mmol Ca²⁺ führt zu einer 3-, bzw. 1,6fachen Zunahme der Trehalase-Aktivität. Die Aktivität von 11 anderen Enzymen, die im rohen Extrakt aus Hefe bestimmt wurden, nimmt nach Zusatz von Polyethylenimin nicht zu. Bei der Inkubation mit Polyethylenimin, das eine maximale Stimulierung der Trehalase-Aktivität bewirkt, werden 97% der gesamten Ribonucleinsäure, 40% des gesamten Proteins und 60% des Polyphosphats (bestimmt als anorganisches Phosphat, das in 7 min bei 95 °C und pH O freigesetzt wird) präcipitiert. Eine gleichartige Präcipitation wurde bei der Inkubation mit Trehalase-stimulierenden Konzentrationen von Mn²⁺ beobachtet. Mit Polyethylenimin aktivierte Trehalase wird durch Ribonucleinsäure aus Hefe, anorganisches Polyphosphat und verwandte Polyanionen gehemmt. Vermutlich führt die Entfernung einer bestimmten Ribonucleinsäure-Fraktion und/oder von Polyphosphat zu der Polyethylenimin-induzierten Aktivierung der Trehalase.Wie von van Solingen und van der Plaat 1975 beschrieben [9], wird eine 4fache Stimulierung von Trehalase durch enzymatische Phosphorylierung mit ATP in der Gegenwart von cyclischem AMP und Mg²⁺ erreicht. Das so durch Phosphorylierung maximal aktivierte Enzym kann durch Zusatz von Polyethylenimin nicht weiter aktiviert werden. Das mit Polyethylenimin 2fach aktivierte Enzym kann jedoch noch einmal 2fach weiter aktiviert werden durch enzymatische Phosphorylierung. Aus diesen Beobachtungen wird geschlossen, daß die durch enzymatische Phosphorylierung bewirkte Aktivierung der Trehalase ein zweistufiger Vorgang ist: Zuerst findet die Entfernung eines Inhibitors statt (dies kann auch mit Polyethylenimin oder mit verwandten Kationen unabhängig von der enzymatischen Phosphorylierung erreicht werden), hierauf folgt weitere Aktivierung durch Konformationsänderung des Enzyms. Wahrscheinlich handelt es sich bei dem durch Phosphorylierung bzw. Behandlung mit Polyethylenimin abgetrennten Inhibitor um eine gewisse Ribonucleinsäure-Fraktion.

---

Abbreviation PEI polyethylene imine The followingenzymes are mentioned in the text: Alcohol dehydrogenase Glyceraldehyde-3-phosphate dehydrogenase (1.1.1.12), Malate dehydrogenase (1.1.1.37), Glucose-6-phosphate dehydrogenase (1.1.1.49), Glutamate dehydrogenase (NAD) (1.4.1.2), Glutamate dehydrogenase (NADP) (1.4.1.4), Aspartate -ketoglutarate aminotransferase (2.6.1.1), 6-Phosphofructokinase (2.7.1.11), Neutral trehalase (3.2.1.28), Pyruvate decarboxylase (4.1.1.1), Phosphoenolpyruvate carboxykinase (4.1.1.49).This paper is dedicated to Prof. Dr. Karl Decker on the occasion of his 60th birthday     

Oxidation of Hydrogen Sulfide by Quinones: How Polyphenols Initiate Their Cytoprotective Effects

We have shown that autoxidized polyphenolic nutraceuticals oxidize H₂S to polysulfides and thiosulfate and this may convey their cytoprotective effects. Polyphenol reactivity is largely attributed to the B ring, which is usually a form of hydroxyquinone (HQ). Here, we examine the effects of HQs on sulfur metabolism using H₂S- and polysulfide-specific fluorophores (AzMC and SSP4, respectively) and thiosulfate sensitive silver nanoparticles (AgNP). In buffer, 1,4-dihydroxybenzene (1,4-DB), 1,4-benzoquinone (1,4-BQ), pyrogallol (PG) and gallic acid (GA) oxidized H₂S to polysulfides and thiosulfate, whereas 1,2-DB, 1,3-DB, 1,2-dihydroxy,3,4-benzoquinone and shikimic acid did not. In addition, 1,4-DB, 1,4-BQ, PG and GA also increased polysulfide production in HEK293 cells. In buffer, H₂S oxidation by 1,4-DB was oxygen-dependent, partially inhibited by tempol and trolox, and absorbance spectra were consistent with redox cycling between HQ autoxidation and H₂S-mediated reduction. Neither 1,2-DB, 1,3-DB, 1,4-DB nor 1,4-BQ reduced polysulfides to H₂S in either 21% or 0% oxygen. Epinephrine and norepinephrine also oxidized H₂S to polysulfides and thiosulfate; dopamine and tyrosine were ineffective. Polyphenones were also examined, but only 2,5-dihydroxy- and 2,3,4-trihydroxybenzophenones oxidized H₂S. These results show that H₂S is readily oxidized by specific hydroxyquinones and quinones, most likely through the formation of a semiquinone radical intermediate derived from either reaction of oxygen with the reduced quinones, or from direct reaction between H₂S and quinones. We propose that polysulfide production by these reactions contributes to the health-promoting benefits of polyphenolic nutraceuticals.     

Rationally designed inhibitors as tools for comparing the mechanism of squalene-hopene cyclase with oxidosqualene cyclase

The inhibition of squalene-hopene cyclase (SHC) (E.C. 5.4.99.-), an enzyme of bacterial membranes catalyzing the formation of pentacyclic sterol-like triterpenes, was studied by using different classes of compounds originally developed as inhibitors of oxidosqualene cyclase (OCS) (E.C. 5.4.99.7), the enzyme of eukaryotes responsible for the formation of tetracyclic precursors of sterols. The mechanism of cyclization of squalene by SHC, beginning with a protonation of the 2,3 double bond by an acidic residue of the enzyme, followed by a series of electrophilic additions of the carbocationic intermediates to the double bonds, is similar to the mechanism of cyclization of 2,3-oxidosqualene by OSC. The inhibitors studied included: (i) analogs of the carbocationic intermediates formed during cyclization, such as aza-analogs of squalene and 2,3-oxidosqualene; (ii) affinity-labeling inhibitors bearing a methylidene reactive group; and (iii) vinyldioxidosqualenes and vinylsulfide derivatives of the substrates. Comparison of the results obtained with the two enzymes, SHC and OSC, showed that many of the most effective inhibitors of OSC were also able to inhibit SHC, while some derivatives acted as specific inhibitors. Differences could be easily explained on the basis of the different substrate specificity of the two enzymes.     

Analytical studies on the temperature distribution in spiral plate heat exchangers: Straightforward design formulae for efficiency and mean temperature difference

The temperature distribution in spiral plate heat exchangers has been calculated numerically to obtain the efficiency and the logarithmic mean temperature difference (LMTD) correction factors F as a function of the number of transfer units N, the number of turns n, and the heat capacity rate ratio C. It has been found that the LMTD correction factors, when plotted against the number of transfer units per turn N/n, fall approximately on a single curve. That curve for balanced countercurrent operation (C = −1) can be very closely represented by the simple formula F = (n/N)tanh(N/n). From that simple analytic representation of our numerical results it was concluded that a simpler physical model might exist to represent the overall behaviour of a spiral plate heat exchanger equally well. In fact, a countercurrent cascade of n cocurrent heat exchangers does result exactly in the above-mentioned formula for the LMTD correction factor. From that model the F-factors for other heat capacity rate ratios C (−1 < C 0) can also be calculated and they are in sufficient agreement with the numerical results.