Crude oil aggregation by microscopy and dynamic light scattering

This research is focused on establishing a methodology to evaluate the aggregation state of Mexican crude oil solutions from two different sources and SARA compositions, by using Dynamic Light Scattering (DLS). Different crude oil concentrations were established and monitored through time in order to determine their effects on the aggregation state. DLS results indicate that the aggregation state of the studied solutions is influenced by crude oil composition, specifically by the amount of resins. Particle size and elemental analysis of the aggregates were performed by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX), respectively. Results from these techniques reveal particulated low-porosity smooth surfaces due to the presence of resin, as well as the determination of the characteristic elements found in asphaltenes. High-Resolution Transmission Electron Microscopy (HTEM) indicated the presence of asphaltene aggregates constituted by nanometric particles and asphaltene stacking as well as ultrafine nanocrystalline-oriented structures.     

Simultaneous determination of neonicotinoid insecticides in sunflower-treated seeds (hull and kernel) by LC-MS/MS

A validated analytical method to determine seven neonicotinoids (dinotefuran, nitenpyram, thiamethoxam, clothianidin, imidacloprid, acetamiprid and thiacloprid) in sunflower seeds (hull and kernel) using HPLC coupled to electrospray ionisation mass spectrometry (ESI-MS) is presented. Sample clean-up based on a solid–liquid extraction, and the removal of lipid fraction, in the case of kernels, is proposed and optimised. Low limits of detection and quantification were obtained, ranging from 0.3 × 10^–3 to 1.2 × 10^–3 µg g^–1 and from 1.0 × 10^–3 to 4.0 × 10^–3 µg g^–1, with good precision, and recovery values ranged from 90% to 104% for hulls and kernels. The method was applied for the analysis of five thiamethoxam-dressed sunflower seeds and four non-treated seeds, where, besides thiamethoxam, residues of the other neonicotinoid, clothianidin, were also detected and confirmed via tandem mass spectrometry (LC-ESI-MS/MS). Finally, the presence of residues of thiamethoxam and clothianidin in collected sunflower seeds (hulls) coming from coated seeds confirmed the translocation of these neonicotinoids through the plant up to these seeds.     

Analysis of the velocity field of granular hopper flow

We report the analysis of radial characteristics of the flow of granular material through a conical hopper. The discharge is simulated for various orifice sizes and hopper opening angles. Velocity profiles are measured along two radial lines from the hopper cone vertex: along the main axis of the cone and along its wall. An approximate power law dependence on the distance from the orifice is observed for both profiles, although differences between them can be noted. In order to quantify these differences, we propose a Local Mass Flow Index that is a promising tool in the direction of a more reliable classification of the flow regimes in hoppers.     

Characterization and properties of blended cement matrices containing activated bamboo leaf wastes

The worldwide production of bamboo generates large volumes of leaf wastes, which are deposited in landfills or burned in an uncontrolled manner, with negative effects in the environment. The ash obtained by calcining of the bamboo leaf waste, shows good qualities as supplementary cementing material for the production of blended cements.The current paper shows a detailed scientific study of a Brazilian bamboo leaf ash (BLA) calcined at 600 °C in small scale condition, by using different techniques (XRF, XRD, SEM/EDX, FT–IR, TG/DTG) and technical study in order to analyse the behaviour of this ash in blended cements elaborated with 10% and 20% by mass of BLA. The results stated that this ash shows a very high pozzolanic activity, with a reaction rate constant K of the order of 10^?1/h and type I CSH gel was the main hydrated phase obtained from pozzolanic reaction. The BLA blended cements (10% and 20%) complied with the physical and mechanical requirements of the existing European standards.     

SAHPPA: a novel power pinch analysis approach for the design of off-grid hybrid energy systems

This work proposes a novel approach called stand-alone hybrid system power pinch analysis (SAHPPA), which is particularly applicable for the design of off-grid distributed energy generation systems. The enhanced graphical tool employs new ways of utilising the recently introduced demand composite curve and supply composite curve while honouring and adapting fundamental energy systems engineering concepts. The SAHPPA method is capable of optimising the capacity of both the power generators and energy storage for biomass (i.e. non-intermittent) and solar photovoltaic (i.e. intermittent) energy technologies, which is a contribution to the emerging area of power pinch analysis. In addition, the procedure considers all possible efficiency losses in the overall system encompassing the charging–discharging and current inversion processes.     

Gelatin microparticles aggregates as three-dimensional scaffolding system in cartilage engineering

A three-dimensional (3D) scaffolding system for chondrocytes culture has been produced by agglomeration of cells and gelatin microparticles with a mild centrifuging process. The diameter of the microparticles, around 10 μ, was selected to be in the order of magnitude of the chondrocytes. No gel was used to stabilize the construct that maintained consistency just because of cell and extracellular matrix (ECM) adhesion to the substrate. In one series of samples the microparticles were charged with transforming growth factor, TGF-β1. The kinetics of growth factor delivery was assessed. The initial delivery was approximately 48 % of the total amount delivered up to day 14. Chondrocytes that had been previously expanded in monolayer culture, and thus dedifferentiated, adopted in this 3D environment a round morphology, both with presence or absence of growth factor delivery, with production of ECM that intermingles with gelatin particles. The pellet was stable from the first day of culture. Cell viability was assessed by MTS assay, showing higher absorption values in the cell/unloaded gelatin microparticle pellets than in cell pellets up to day 7. Nevertheless the absorption drops in the following culture times. On the contrary the cell viability of cell/TGF-β1 loaded gelatin microparticle pellets was constant during the 21 days of culture. The formation of actin stress fibres in the cytoskeleton and type I collagen expression was significantly reduced in both cell/gelatin microparticle pellets (with and without TGF-β1) with respect to cell pellet controls. Total type II collagen and sulphated glycosaminoglycans quantification show an enhancement of the production of ECM when TGF-β1 is delivered, as expected because this growth factor stimulate the chondrocyte proliferation and improve the functionality of the tissue.     

Effects of ozone and chlorine postharvest treatments on quality of fresh‐cut red bell peppers

The effects of chlorine (200 μL L^?1), ozonated water (1 μL L^?1) and gaseous ozone (0.7 μL L^?1) on physicochemical attributes and microbial quality of minimally processed red bell peppers were studied. In all the experiments, O₂ continuously decreased and CO₂ concentration increased, the pH augmented and a significant softening was observed in all the fruits. By day 14, L* values decreased in all the fruits, with the greatest changes found in the chlorinated samples (approximately 12 units). Peppers treated with the aqueous solutions showed greater changes in the quality attributes with increasing washing times and especially when chlorine was used. The exposure for three min to gaseous O₃ reduced the mesophiles, psychrotrophes and fungal populations of the fresh‐cut peppers in 2.5, 3.3 and 1.8 log units, respectively. Combined with modified atmosphere, this could be an appropriate method to maintain the quality and extend the storage period of minimally processed red bell peppers.     

Nonlinear dynamics of a class-a two-photon laser with injected signal in cascade systems

Abstract

The dynamics of a two-photon laser with injected signal (TPLIS) in the limit of high quality cavity (class-A laser) is analysed by explicitly considering the underlying multi-level structure of the amplifying medium. A three-level cascade system is considered which retains the basic physics of the microscopic lasing processes. In this way the usual two-photon laser equations are consistently modified by the appearance of different dynamic frequency shifts dependent on the two-photon population inversion and on the laser intensity (ac-Stark shift). Although the basic instability scenarios are not qualitatively modified with respect to the effective two-level TPLIS, from the quantitative point of view, population-induced shifts heavily affect the threshold of appearance of instabilities.