Transversely compressed bonded joints

The load capacity of bonded joints can be increased if transverse pressure is applied at the interface. The transverse pressure is assumed to introduce a Coulomb-friction contribution to the cohesive law for the interface. Response and load capacity for a bonded single-lap joint was derived using non-linear fracture mechanics. The results indicated a good correlation between theory and tests. Furthermore, the model is suggested as theoretical base for determining load capacity of bonded anchorages with transverse pressure, in externally reinforced concrete structures.     

Symmetric Assumptions in the Theory of Disruptive Innovation: Theoretical and Managerial Implications

The literature on disruptive innovation has convincingly explained why many established firms encounter problems under conditions of discontinuous change. Incumbents fail to invest in new technologies that are not demanded by their existing customers. This argument is grounded in resource dependency theory and the associated assumption that existing customers control a firm's internal resource allocation processes. While the problem of disruptive innovation has been convincingly explained, there is still a need for managerial solutions. We argue that a key reason why such solutions are lacking can be found in the asymmetric assumptions made in the original theory of disruptive innovation. Specifically, we identify two related forms of asymmetry. First, the focal (incumbent) firm is treated as a collection of heterogeneous actors with different preferences, incentives and competencies, whereas firms in the surrounding environment are treated as if they contained no such heterogeneity. Second, the theory of disruptive innovation describes incumbents as controlled by their environment, but has failed to recognize that the environment can also be influenced. In this paper we argue that a more symmetric theory of disruptive innovation – i.e. one that treats all similar entities in the same way – opens up for a range of interesting managerial solutions.     

Combination of Reaction and Separation in Heterogeneous Catalytic Hydrogenation of Ethylformate

Continuous hydrogenation reaction of ethyl benzoylformate was studied over a (–)‐cinchonidine (CD)‐modified Pt/Al₂O₃ catalyst. The catalyst showed a good stability, and high enantioselectivity was achieved in the fixed‐bed reactor. Chromatographic separation of (R)‐ and (S)‐ethyl mandelate originating from a post‐continuous hydrogenation reaction of ethyl benzoylformate over the (–)‐CD‐modified Pt/Al₂O₃ catalyst was investigated in the same reaction mixture. A commercial column filled with a chiral selector resin was chosen as a perspective preparative‐scale adsorbent. Since adsorption equilibrium isotherms were linear within the entire investigated range of concentrations, they were determined by pulse experiments for the isomers present in a post‐reaction mixture. Breakthrough curves were measured and described successfully by the dispersive plug‐flow model with linear driving force approximation.     

Bark as feedstock for dual fluidized bed gasifiers—Operability,efficiency, and economics

The demand for biofuels and biochemicals is expected to increase in the future, which will in turn increase the demand for biomass feedstock. Large gasification plants fueled with biomass feedstock are likely to be a key enabling technology in a resource‐efficient, bio‐based economy. Furthermore, the costs for producing biofuels and biochemicals in such plants could potentially be decreased by utilizing inexpensive low‐grade residual biomass as feedstock. This study investigates the usage of shredded tree bark as a feedstock for the production of biomethane in the GoBiGas demonstration plant in Gothenburg, Sweden, based on a 32 MW_th industrial dual fluidized bed gasification unit. The plant was operated with bark feedstock for 12 000 hours during the period 2014 to 2018. Data from the measurement campaign were processed using a stochastic approach to establish the plant's mass and energy balances, which were then compared with operation of the plant with wood pellets. For this comparison, an extrapolation algorithm was developed to predict plant performance using bark dried to the same moisture content as wood pellets, ie, 8%_w.b. Plant operation with bark feedstock was evaluated for operability, efficiency, and feedstock‐related cost. The gas quality achieved during the test period was similar to that obtained for operation with wood pellets. Furthermore, no significant ash sintering or agglomeration problems were observed more than 750 hours of operation. The calculated biomass‐to‐biomethane efficiency is 43% to 47% (lower heating value basis) for operation with wet bark. However, the predicted biomass‐to‐biomethane efficiency can be increased to 55%–65% for operation with bark feedstock dried to 8% moisture content, with corresponding feedstock costs in the range of 24.2 to 32.7 EUR/MWh; ie, a cost reduction of about 40% compared with wood pellets.     

Finite-time consensus protocols for multi-dimensional multi-agent systems

A finite-time consensus protocol is proposed for multi-dimensional multi-agent systems, using direction-preserving signum controls. Filippov solutions and nonsmooth analysis techniques are adopted to handle discontinuities. Sufficient and necessary conditions are provided to guarantee infinite-time convergence and boundedness of the solutions. It turns out that the number of agents which have continuous control law plays an essential role in finite-time convergence. In addition, it is shown that the unit balls introduced by ?p norms, where p∈[1,∞], are invariant for the closed loop.     

The Cut and the Continuum: Sophie Ristelhueber’s Anatomical Atlas

From her early photographs of the ruinous aftermath of the Lebanon War in Beirut (1982) to her more recent images of bomb craters in Eleven Blowups (2006), the French artist Sophie Ristelhueber has been intent to maintain, in her own metaphor, ‘the analytical distance of an anatomy lesson’. Exhibiting the evidence of warfare but withholding their explanation, Ristelhueber’s provocative gesture of making art of war, removing human conflicts from their political contexts to render them as still-lifes, ready-mades, earthworks, or surrealist poems, is patently anti-journalistic. In keeping with the artist’s surgical analogy, this article explores Ristelhueber’s aesthetic mode of address as one that shares its fundamental operation with that of photography – namely, to make a cut. Retracing the morphology of recurring imprints and injuries that appear across the terrestrial and corporeal expanses traversed in her work, the article considers the ways in which these cuts pertain to the transformative power of violence and images alike.     

Time-synchronised hardware-in-the-loop simulation — Applied to sheet-metal press line optimisation

This paper presents an off-line process parameter tuning method, focussing on complex control functions for automated manufacturing systems. The proposed method is based on a combination of simulation-based optimisation and time-synchronised hardware-in-the-loop simulation. Real industrial control systems, e.g., PLCs, are included in the simulation, executing the unchanged control code from the manufacturing plant. This approach allows all plant control functions to be included, even time-critical feedback loops and vendor secret blocks such as motion control. Consequently, the method suggested manages the problems identified in previously presented simulation-based approaches. Furthermore, a case study of an automotive sheet-metal press line has been performed to verify the proposed method, with successful results.     

Fundamental influences of particles on stirred and unstirred venting processes of foaming systems

Venting is the common safety measure to protect plant equipment against excessive overpressure. So far, scenarios in which particles were part of the system and should have been accounted for did ignore their presence; the scenarios were treated like a two-phase system. Current research shows that particles can have a major influence on the venting behaviour. Experimental results indicate that particles affect level swell and relief flow especially of foamy systems. Based on those results four different layers of influence of the particle have been identified and are presented in a first model. Based on this model recommendations for the development of new and more complex models are given.