Effect of annealing on d.c. conductivity of V2O5-SnO-TeO2 glasses

The d.c. conductivity (σ) of V₂O₅-SnO-TeO₂ glasses prepared by the press-quenching method was studied at temperatures from room temperature (RT) to 473 K, and the effect of annealing on σ was investigated. The conductivity of 50V₂O₅·20SnO·30TeO₂ glass was determined to be 3.98×10⁻⁴ Scm⁻¹ at 473 K and was unchanged for annealing (6–48 h) at 493 K, lower than T_g = 501 K, while its density increased with annealing time. These glasses were found to be n-type semiconductors, and the conduction was confirmed to be due to adiabatic small polaron hopping for V₂O₅ ≧ 50 mol%, and non-adiabatic for V₂O₅ < 50 mol%. The activation energy for conduction, W, decreased with annealing time. Variations in oxygen molar volume of the glasses with annealing time inferred a change in glass structure, from loosely to closely packed, resulting in a decrease in vanadium ion spacing with annealing. This caused an increase in the polaron band width, producing a decrease in polaron hopping energy and W. The effect of annealing time on the density of 50V₂O₅·20SnO·30TeO₂ glass was explained adequately by Winter's formula.     

Discrimination of forearm''s motions by surface EMG signals using neural network

The effect of the antiviral, antitumoural xanthate D609 on the activity of phospholipase A2, C (PC- and Pi-specific) and D was investigated. D609 is the first model substance of a new concept of antiviral therapy that interferes with cellular regulation mechanisms, rather than with virus coded enzymes. Exclusively phosphatidylcholine (PC) specific phospholipase C (PC-PLC) was found to be inhibited in a dose-dependent manner. Enzyme activity was determined either as the rate of acid release from PC or as the rate of phosphorylcholine production form 3H labelled PC. Lineweaver-Burk plots revealed D609 as a competitive inhibitor of PC-PLC with a Ki of 6.4 microM. In addition, D609 competitively inhibited PC-PLC mediated cleavage of P-nitrophenylphosphorylcholine (p-NPP), a pseudo-substrate of PC-PLC with a Ki of 8.8 microM. These data suggest that D609 competes with the phosphorylcholine residue of PC for binding to PC-PLC.     

Kinetics of Iron Chlorination of Roasted Illmenite Ore,Fe2TiO5 in a Fluidized-Bed Reactor

The preferential chlorination reaction of iron constituents in roasted ilmenite ore was studied in an experimental fluidized bed reactor. The influence of the roasting temperature on the selectivity of chlorination reactions was also examined. It was found that preferential iron chlorination is dependent on roasted product morphology. Effects of chemical and process variables in the fluidized bed reactor, such as chlorination temperature, chlorine gas partial pressure, gas-solid contact time and the quantity of coke added, were investigated in order to study the kinetics of the preferential chlorination reaction. A modified bubble assemblage model was applied to analyze behavior of gases and solids in the reactor. The chlorination reaction rate constant was found to be a function of temperature and coke quantity present.     

Continuous intra-arterial infusion therapy via the occiptial artery for head and neck tumors: second choice treatment

We report three cases in which continuous intra-arterial infusion therapy via the occipital artery was combined with radiotherapy for head and neck tumors. An angiographic catheter was inserted into the feeding artery of the tumor retrogradely via the occipital artery under fluoroscopic guidance. Patients treated were maxillary sinus cancer, tongue cancer and hemangiosarcoma. No complications occurred due to this procedure in any of the three patients. This procedure was considered very useful when the approach from the superficial temporal artery was not possible due to prior treatment.     

Catalytic Behavior of Bis(Pyrrolide-Imine) and Bis(Phenoxy-Imine) Titanium Complexes for the Copolymerization of Ethylene with Propylene, 1-Hexene,or Norbornene

This contribution reports the catalytic behavior of bis(pyrrolide-imine)Ti complexes 1 and 2 , [2-(RNCH)-C₄H₃N]₂TiCl₂ ( 1 , R = Ph; 2 , R = cyclohexyl), and bis(phenoxy-imine)Ti complex 3 , [2-(Ph-NCH)-3-t Bu-C₆H₃O]₂TiCl₂ for the copolymerization of ethylene with propylene, 1-hexene, or norbornene. An inspection of the X-ray structures of complexes 1–3 suggested that complexes 1 and 2 with pyrrolide-imine ligands would provide more space for olefin polymerization than complex 3 with phenoxy-imine ligands. In addition, DFT calculations also showed that active species derived from complexes 1 and 2 possess higher electrophilicity of the Ti center compared to that from complex 3 . Complexes 1 and 2 on activation with methylalumoxane (MAO) had higher affinity for propylene and 1-hexene and incorporated higher amounts of propylene ( 1 ; 30.5 mol%, 2 ; 23.4 mol%) and 1-hexene ( 1 ; 1.9 mol%, 2 ; 1.7 mol%) than complex 3 (propylene; 4.5 mol%, 1-hexene; 0.4 mol%). The incorporation levels of propylene and 1-hexene displayed by complexes 1 and 2 were lower than those for Cp₂TiCl₂ (propylene; 41.6 mol%, 1-hexene; 5.1 mol%) under identical conditions. In contrast, complexes 1 and 2 exhibited higher incorporation ability for norbornene and produced copolymers with much higher norbornene contents ( 1 ; 32.0 mol%, 2 ; 26.5 mol%) than Cp₂TiCl₂ (1.2 mol%) under the same conditions. Additionally, complex 3 also promoted higher norbornene incorporation (4.3 mol%) than Cp₂TiCl₂ and provided a copolymer with extremely narrow molecular weight distribution (M_w/M_n 1.14). A correlation exists between electrophilicity of the Ti center in active species and norbornene incorporation.     

Correlation between friction of articular cartilage and reflectance intensity from superficial images

The lubrication mechanism of articular cartilage is characterized by an efficient performance. In this work, friction of articular cartilage was evaluated with in-site images of articular surface. The images were captured with the laser light reflected at the interface between a prism and articular cartilage. The attenuation of reflectance was associated with the increase of the contact of collagen network of articular cartilage. The light reflectance and friction coefficient for short sliding presented a significant positive correlation. Friction tests were also carried out for short (30 s) and long (300 s) preloading times. The results indicate that depletion of fluid film is responsible for the increase of friction and the recovery of the fluid film was observed for the long preloading after the early stage of sliding.     

MATLAB在异步电动机直接转矩控制系统仿真中的应用

应用ＭＡＴＬＡＢ语言进行软件编制,能方便快捷地解决矩阵的多种运算及异步电机的直接转矩控制系统的仿真研究。     

Construction of an inverse model with cutoff filter and its application to a model feedback control system

An inverse system for a given time‐invariant system has been used as a compensator. However, in control systems which include traditional inverse systems, the adverse effects of sensor noise may seriously influence the systems, because the inverse system generally has high gain in the high‐frequency area. Therefore, in these control systems other compensators than the inverse system must be constructed with complex properties. In this paper, a method of design of a new inverse model with cutoff filter for the Model Feedback Control System (MFCS) is proposed. The inverse model designed by the proposed method is an approximate inverse model for a given model. The approximation can be evaluated by the norm criterion for the difference between the model and the biproper transfer function used for construction of the inverse model. In order to demonstrate the usefulness of the proposed inverse model, this inverse model is applied to the MFCS. By theoretical and numerical analysis it can be shown that the proposed inverse model can reduce sufficiently the effects of sensor noise in the MFCS. © 2000 Scripta Technica, Electr Eng Jpn, 133(4): 79–90, 2000