Culture characteristics of carotenoid-producing filamentous fungus T-1, and carotenoid production

The culture characteristics, carotenoid production, and associated biosynthetic pathway of strain T-1 were examined. As a result of examining the culture temperature and light irradiation, an increase of neurosporaxanthin and neurosporaxanthin beta-D-glucopyranoside was observed at a low temperature and 0 lx. It was suggested that highly polar carotenoids, such as neurosporaxanthin, and carotenoid glycosides were involved in the stabilization of membrane during nutrition storage other than the defense function of fungus bodies. Strain T-1 produced lycopene, beta-carotene, gamma-carotene, torulene, neurosporaxanthin, and neurosporaxanthin beta-D-glucopyranoside, as assessed by HPLC, LC-MS, and NMR analysis. Carotenoid biosynthesis begins with neurosporene, passing to lycopene and gamma-carotene through cyclization, and produces beta-carotene. In addition, it is saturated, gamma-carotene is converted to torulene, and neurosporaxanthin is produced. Thus, the carotenoid biosynthetic pathway in strain T-1 was estimated.     

Effect of tacticity of poly(methyl methacrylate) on interfacial region with silica in polymer nanocomposite

The effect of tacticity on the interfacial region between poly(methyl methacrylate) (PMMA) and silica in a PMMA/silica nanocomposite was investigated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The glass transition temperature (T_g) values of the syndiotactic (st-) and atactic (at-) PMMA/silica nanocomposites are higher than those of the neat PMMA. Conversely, the T_g of the isotactic (it-) PMMA/silica nanocomposite is slightly higher than that of the neat it-PMMA. DSC and XRD results suggest that the restriction of the PMMA chain mobility in the silica nanoparticle interfacial region heightens as the syndiotactic content increases. FT-IR results show that this phenomenon is caused by the interaction between the carbonyl group of PMMA and the silanol group on the silicon dioxide surface. Therefore, it can be concluded that the syndiotactic-rich PMMA has a significantly different molecular mobility from that of the neat PMMA in the interfacial region with silica nanoparticle surface than isotactic-rich PMMA.     

The effect of ethane on the performance of commercial polyphenylene oxide and Cardo-type polyimide hollow fiber membranes in CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation applications

Impurities such as hydrogen sulfide, water vapor and heavy hydrocarbons in natural gas have considerable effects on the membrane performance. Small amounts of condensable and polymer soluble components in the feed gas cause swelling or plasticization of glassy membranes, leading to a reduction in membrane selectivity. In the present research the influence of ethane was investigated on the permeance and selectivity of two commercially available hollow fiber membranes, namely Cardo-type polyimide and PPO hollow fibers for CO₂/CH₄ separations. It was concluded that the gas mixture permeation rate was increased in the presence of C₂H₆. However, the CO₂/CH₄ separation factors remained almost the same in the presence and absence of the C₂H₆.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Fabrication of Bulk β-FeSi2 Crystal With ThreeDimensional Alignment by an Oscillating Magnetic Field

It has been reported that an anisotropic magnetic field could produce the three-dimensional alignment of fine single-crystal particles with the orthorhombic crystal structure.However,the three-dimensional alignment was achieved only in suspensions.Fabrication of bulk"single"materials that have the three-dimensional alignment of grains has been desired.This study proposes a procedure for the fabrication,which consists of slip casting under an oscillating magnetic field and sintering.Optimization of casting and sintering conditions achieved the three-dimensionally aligned bulkβ-FeSi₂.     

The roles of the Trommsdorff–Norrish effect in phase separation of binary polymer mixtures induced by photopolymerization

Influence of the Trommsdorff–Norrish (T–N) effect on the phase separation of methyl methacrylate (MMA)/poly(ethyl acrylate) (PEA) mixtures undergoing photo-polymerization was examined by a combination of several experimental techniques. By FT-IR spectroscopy, it was found that the polymerization conversion explosively increases at the onset of this T–N effect. The characteristic irradiation time τ at which this effect occurs, strongly depends on the light intensity and gradually shifts to early time as the irradiation intensity increases. The shrinkage of the mixture observed in situ by laser-scanning confocal microscopy exhibits a transition at a particular irradiation time which is slightly longer than the characteristic time τ. By gel permeation chromatography (GPC), it was found that the molecular weight of the resulting PMMA was almost unchanged before τ and suddenly increases about an order of magnitude after the onset of the auto-acceleration effect. Finally, the characteristic length scales of the morphology also quickly increase with irradiation time and are eventually frozen by this T–N effect. These experimental results indicate that the Trommsdorff–Norrish effect plays an important role in the kinetic processes of polymerization-induced phase separation, suggesting an efficient tool to control the morphology of the polymerizing mixture.     

Nanostructured poly(3-hexylthiophene-2,5-diyl) films with tunable dimensions through self-assembly with polystyrene

Poly(3-hexylthiophene-2,5-diyl) is among the most widely used conjugated polymers for opto-electronic applications. To enhance its properties, researchers have attempted to nanostructure this polymer using various processes including breath figure arrays, nanolithography and elaborated organic synthesis. We here demonstrate a simple process to nanostructure the conjugated polymer using self-assembly with polystyrene and selective removal of one of the phases. The influence of the molecular weight of each polymer on the thin film morphology was systematically studied by atomic force microscopy. Using this approach, we observe two types of nanostructure, namely, nanoporous and nanoisland structures, of which the dimensions can be tuned by modifying the molecular weight of each polymer in the blend. This simple process introduces a cost-effective alternative to produce thin films of conjugated polymer with average nano-features from 100 nm up to 500 nm which could be used in a wide range of applications.     

Porous polyethersulfone hollow fiber membrane in gas–liquid contacting processes

Porous polyethersulfone hollow fiber membranes were fabricated via dry–wet phase inversion method with the polymer concentration in the spinning dope either 13 wt% or 15 wt%. The fabricated hollow fiber membranes were characterized by different test methods and the performance of membranes in contactor applications was tested by CO₂ absorption. The mean pore size, effective surface porosity and membrane porosity decreased while the membrane density and Liquid Entry Pressure (LEPw) increased as polymer concentration increased. The CO₂ absorption flux of the fabricated membranes was measured in two cases; i.e. when the absorbent, distilled water, was in the lumen side or in the shell side. The CO₂ flux for the membrane, fabricated from 13 wt% PES solution, was compared with some commercial and in-house made membranes. The former membrane had 111% higher flux than a commercial PTFE membrane.     

Preparation and characterization of polyvinylidene fluoride hollow fiber membranes for ultrafiltration

Polyvinylidene fluoride (PVDF) hollow fiber membranes were prepared using the solvent spinning method. N,N-dimethylacetamide was the solvent and ethylene glycol was employed as non-solvent additive. The effect of the concentration of ethylene glycol in the PVDF spinning solution as well as the effect of ethanol either in the internal or the external coagulant on the morphology of the hollow fibers was investigated. The prepared membranes were characterized in terms of the liquid entry pressure of water measurements, the gas permeation tests, the scanning electron microscopy, the atomic force microscopy, and the solute transport experiments. Ultrafiltration experiments were conducted using polyethylene glycol and polyethylene oxides of different molecular weights cut-off as solutes. A comparative analysis was made between the membrane characteristic parameters obtained from the different characterization techniques.     

Kinetics and reaction scheme of coal liquefaction over molten tin catalyst

Rates of formation of gases, oils, asphaltenes and preasphaltenes during non-solvent liquefaction of coal over molten tin catalyst have been measured. A probable reaction scheme and the rate constants for the pathways comprising the scheme have been presented. The results show that the catalyst greatly accelerates the conversion of preasphaltenes to asphaltenes. It also accelerates two other reactions, i.e., coal to preasphaltenes and coal to asphaltenes. By contrast, the catalyst does little to promote gasification and formation of oils.