A new erasing method for a single-voltage long-endurance flashmemory

A new method to erase a standard (double-poly, stacked-gate NOR-type) flash cell is proposed. The method, still using the tunneling mechanism to extract electrons from the floating gate, is based on the concept of keeping the electric field constant during the whole erasing operation. The new method has two main advantages with respect to the conventional one: (1) it does not depend on the supply voltage variation and (2) it allows a better reliability in terms of endurance-induced stress. Results have shown that flash device performances are greatly improved in terms of stability and endurance reliability up to one million cycles     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

A novel method for elimination of line-current harmonics insingle-stage PFC switching regulators

This paper studies a particular single-stage power-factor-correction (PFC) switching regulator employing a discontinuous-conduction-mode (DCM) boost-input cell and a continuous-current-mode (CCM) forward output cell. Although this single-stage PFC regulator can provide a reasonably high power factor when its PFC stage is operating in discontinuous mode, substantial reduction in line-current harmonics is possible by applying a suitable frequency-modulation scheme. This paper derives a frequency-modulation scheme and proposes a practical implementation using a simple translinear analog circuit. A quantitative analysis on the total harmonic distortion (THD) of the line current when the circuit is subject to a limited range of frequency variations is presented along with some considerations for practical design. Experimental data obtained from a prototype confirms the effectiveness of the proposed frequency-modulation scheme. The proposed analog translinear circuit allows custom integrated circuit implementation, making it a viable low-cost solution to the elimination of line-current harmonics in switching regulators     

Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs     

Efficacy and pharmacokinetics of gallopamil in patients with coronary artery disease

We prospectively studied 10 patients with stable exertional ischaemia, selected from a larger group of patients referred for suspected coronary artery disease or to detect residual ischaemia after myocardial infarction, to evaluate pharmacokinetic changes during chronic treatment with gallopamil and its correlation with clinical efficacy in patients with coronary artery disease. Our study consisted of a 1-week run-in single-blind placebo treatment and a 4-week single-blind gallopamil treatment. At the end of the run-in period patients underwent two different exercise tests, the first 2 hours and the second 7 hours after placebo administration. During active treatment all patients underwent two different exercise tests, the first 2 hours and the second 7 hours after gallopamil (50 mg) administration on the 1st and 28th days of gallopamil therapy. On the same days in eight of the patients we evaluated gallopamil pharmacokinetic changes. Our data revealed a rapid increase of unchanged gallopamil and its metabolite (norgallopamil) in the plasma, and a peak concentration of these substances about 2 hour after oral administration on both the 1st and 28th day of observation. Moreover, our results demonstrated an increase between the first and 28th day of treatment in peak concentration of unchanged gallopamil in the plasma, and of AUC 0-infinity and AUC o-c values during chronic treatment with gallopamil. Our clinical data showed an improvement in exercise results during gallopamil therapy related to increased concentration of the drug.     

A Biologically-Parameterized Feather Model

Feathers, unlike other cutaneous appendages such as hair, fur, or scales have a definite structure. Variation in feather structure creates a wide range of resulting appearances. Collectively, feather structure determines the appearance of the feather coat, which can largely affect the resulting look of a feathered object (bird). In this paper we define the structure of individual feathers using a parameterization based on biological structure and substructures of actual feathers. We show that our parameterization can generate a large variety of feathers at multiple levels of detail and provide an initial step to semi‐automatically generating a wide range of feather coats. his is achieved by specifying an intuitive interpolation between different structures and ages of feathers.