Normal uterus and FIGO stage I endometrial carcinoma: dynamic gadolinium-enhanced MR imaging

Dynamic magnetic resonance (MR) imaging was performed on a 1.5-T superconducting unit for evaluation of 26 stage I endometrial carcinomas. To establish the appearance of the normal uterus, 27 normal uteri were also evaluated. After rapid injection of gadopentetate dimeglumine, dynamic images were obtained every 30 seconds with the spin-echo technique in the sagittal plane. On dynamic studies of endometrial carcinoma, the tumor-myometrial contrast was marked at 120 seconds after administration of gadopentetate dimeglumine (contrast-to-noise ratio [C/N], 26.0). The tumor-myometrial contrast on the dynamic study was more marked than that on postcontrast T1-weighted images (C/N, 10.0) and on T2-weighted images (C/N, 2.14). Dynamic and postcontrast MR images were superior in enabling differentiation of viable tumors from necrosis or residual secretion in the endometrial cavity. In the evaluation of presence of tumor and myometrial invasion, the accuracy of T2-weighted imaging and dynamic imaging was 67.9% and 84.9%, respectively.     

Patients with ultrasonic coarse-nodular cirrhosis who are anti-hepatitis C virus-positive are at high risk for hepatocellular carcinoma

BACKGROUND: The relationship between echosonographic patterns of patients with cirrhosis who are antihepatitis C virus (HCV)-positive, the DNA synthesis of hepatocytes, and the risk for HCC were studied. METHODS: Thirty-eight patients with anti-C-100 antibody-positive and Child's grade A posthepatitic cirrhosis were studied. DNA synthesis activity was measured by a bromodeoxyuridine (BrdU, a thymidine analogue)-labeling index (LI), using the BrdU-anti-BrdU in vitro method, and the patients were followed prospectively by frequent liver ultrasonography for 3 years. The ultrasound patterns were classified into fine, coarse, and coarse-nodular (CN) patterns, and the reproducibility of the classification in practical use also was confirmed. RESULTS: Of the 21 patients with high DNA synthesizing cirrhosis (BrdU LI > or = 1.5%), 10 (48%) showed coarse-nodular, 5 (24%) coarse, and 6 (29%) fine pattern in ultrasonography. Conversely, of the 17 patients with low DNA synthesizing LC (BrdU LI < 1.5%), only 1 (6%) showed coarse-nodular, 2 (12%) coarse, and 14 (82%) fine pattern. A significant relationship was found between the two groups of BrdU LI and ultrasound imaging patterns (P < 0.05). The incidence of CN pattern was significantly higher (P < 0.01) in the high DNA synthesizing group than in low DNA synthesizing group. Of the 11 patients with CN pattern by ultrasound imaging, 10 (91%) were in the high DNA synthesizing group, and 9 (82%) developed HCC during the follow-up period, compared with 3 of 7 (43%) with coarse, and only one of 20 (5%) with fine pattern developed HCC. The incidence of HCC was significantly higher (P < 0.01) in patients with a CN cirrhosis pattern than in those with a fine pattern. CONCLUSIONS: In patients with cirrhosis who are anti-HCV-positive, the CN pattern by ultrasound imaging indicates increased DNA synthesis of hepatocytes and a high risk for developing HCC.     

The constrained total least squares technique and its applicationsto harmonic superresolution

The constrained total least squares (CTLS) method is a natural extension of TLS to the case when the noise components of the coefficients are algebraically related. The CTLS technique is developed, and some of its applications to superresolution harmonic analysis are presented. The CTLS problem is reduced to an unconstrained minimization problem over a small set of variables. A perturbation analysis of the CTLS solution is derived, and from it the root mean-square error (RMSE) of the CTLS solution, which is valid for small noise levels, is obtained in closed form. The complex version of the Newton method is derived and applied to determine the CTLS solution. It is also shown that the CTLS problem is equivalent to a constrained parameter maximum-likelihood problem. The CTLS technique is applied to estimate the frequencies of sinusoids in white noise and the angle of arrival of narrowband wavefronts at a linear uniform array. In both cases the CTLS method shows superior or similar accuracy to other advanced techniques     

Fate of the human liver after hemihepatic portal vein embolization: cell kinetic and morphometric study

The favorable therapeutic effect of preoperative portal vein embolization (PVE) was analyzed by assessing various volumetric, cell kinetic and morphometric parameters and examining histologically the embolized and nonembolized lobes of 15 patients who underwent extended right lobectomy 2 to 3 weeks after PVE. Each lobar volume was calculated from computed tomography (CT) images, hepatocyte proliferation was evaluated by assessing proliferative cell nuclear antigen (PCNA) expression and mitosis, hepatocyte apoptosis was evaluated by the terminal deoxyribonucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) assay, and the hepatocyte numerical density as well as the sinusoidal volumetric ratio (Vvs) and the mean hepatocyte volume (Cv) were calculated using morphometric methods. PVE induced hepatocyte apoptosis and atrophy of the embolized lobe (from 798 +/- 213 to 708 +/- 222 cm3; P < .05). The increased sinusoidal volume in this lobe (17.7% +/- 4.5% and 21.7% +/- 5.7%, periportal and pericentral area, respectively) may have been attributable to hepatocyte deletion. Cells in the nonembolized lobe entered a highly active phase of proliferation within 2 weeks after PVE. Further evidence of cellular proliferation was provided by the increased nonembolized lobar volume (from 379 +/- 132 to 545 +/- 130 cm3; P < .01) and numerical density of hepatocyte nuclei (Nv) (5.38 +/- 1.26 vs. 3.11 +/- 0.85 x 10(5)/mm3; P < .01, nonembolized vs. embolized lobe, respectively). In conclusion, these results indicate that the favorable effect of PVE is attributable to a net gain of functional hepatocyte mass and/or early induction of hepatocyte proliferation following hepatectomy.     

A unified analysis of resonant converters

The general method of analysis for resonant power converters is presented. This analytical method generalizes the idea of state-space-averaging technique to overcome the limitations of the conventional state-space-averaging method. As the result, the characteristics of resonant power converters are clarified so that transfer functions and stability conditions are revealed. In addition, a computer program of analysis based on the proposed method is developed. The program can be applied to various resonant power converters, even when they have parasitic losses and higher-order resonant circuits     

Advanced concepts in electric vehicle design

In 1994, the Eco-Vehicle Project was begun to develop an electric vehicle (EV) using a ground-up design approach that incorporates unique designs specific to an EV. The Eco-Vehicle will be a high-performance, but ultrasmall, battery-powered vehicle. New designs for the Eco-Vehicle include an in-wheel motor drive system, a hollow load floor which will house the batteries, and a new battery management system. The Eco-Vehicle may also utilize other advanced concepts suitable especially for EVs, including solar panels for battery charging and intelligent crash avoidance and guidance systems     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Sintering of fibrous barium titanate powder compacts with preferred orientation

The sintering of fibrous BaTiO₃ powder particles was investigated. Special emphasis was given to the role of particle orientation in the compact on densification and microstructure development. Compacts were made by dry-pressing. During the initial stage of sintering, the fibrous particles rearranged and bundles of particles were formed. The volume of pores between bundles of particles decreased on further heating. Grain growth started when the sintered density reached ca. 56% of the theoretical density. Higher temperatures of sintering increased the degree of the crystal axis orientation. Thus, highly orientated sintered bodies with high densities were prepared by heating at 1500 °C.     

Expert system for dispatch control in restoration of ehv power system after complete blackout

Present-day power systems operate with high reliability, and it is rare that a blackout will extend over an entire system swiftly and securely. This paper considers automatic power supply to loads after a complete blackout of a system. First, taking into account characteristics of generators, loads, and initial power sources, a method is proposed of allocating several generators to each load in parallel to the system and supplying power to the load sequentially. Second, to remove the imbalance between supply and demand of power, a method is proposed of adjusting the amount of supply and generation according to a present imbalance and the sum of past ones. Third, to automatically issue orders for start-up, parallel, follow-up, stand-by, and stoppage of generators, several rules for each power station are set and an expert system is made based on them. Finally, the expert system is applied to a model power system, and it is verified that it can restore loads without any trouble for a complete blackout which occur at any time of a day and in any restoration pattern.     

Analysis of polarization plane rotation characteristic in 2D photonic crystal waveguide with chiral medium by condensed node spatial network

Using the photonic band gap in photonic crystals, the fundamental waveguide structures for the light wavelength range have been developed. Based on the fine structure of these many functional devices have been proposed by analytical or numerical simulation methods and the experiments of trial manufacture. In this paper, the treatment of chiral dielectric in the Condensed Node Spatial Network for the vector potential is explained, and we show the polarization plane rotation property in air‐hole and pillar type photonic crystal waveguide structures with the chiral medium substrate. Then, we show the fundamental advantage of the air‐hole type photonic crystal waveguide structure in application to a mode converter. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(1): 7–14, 2005; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20098