Effect of MnOx/TiO2 Oxidation State on Ozone Concentration in a Nonthermal Plasma-Driven Catalysis Reactor

Manganese oxides on titanium dioxide were prepared by impregnation method at various calcination temperatures and by deposition-precipitation method and the catalysts were characterized using TG-DTA, XRD, XPS, and N₂ adsorption. Various oxidation states for manganese were obtained and activity towards ozone decomposition inside a nonthermal plasma catalysis reactor was investigated. Activity tests show that with increasing manganese oxidation state, the greater the degree of ozone decomposition inside the reactor. MnOx/TiO₂ prepared by impregnation method calcined at 350 °C showed the highest decrease in ozone concentration.     

Three-dimensional rainbow schlieren measurements in underexpanded sonic jets from axisymmetric convergent nozzles

The rainbow schlieren deflectometry has been combined with the computed tomography to obtain three-dimensional density fields of shock containing free jets and we call the method the schlieren CT. Experiments on the schlieren CT have been performed at a nozzle pressure ratio of 4.0 by using an axisymmetric convergent nozzle with an inner diameter of 10 mm at the exit where the nozzle was operated at an underexpanded condition. Multidirectional rainbow schlieren pictures of an underexpanded sonic jet can be acquired by rotating the nozzle about its longitudinal axis in equal angular intervals and the three-dimensional density fields are reconstructed by the schlieren CT. The validity of the schlieren CT is verified by a comparison with the density fields reconstructed by the Abel inversion method. As a result, it is found that excellent quantitative agreement is reached between the three-dimensional jet density fields reconstructed from both methods.     

Fabrication of Bulk β-FeSi2 Crystal With ThreeDimensional Alignment by an Oscillating Magnetic Field

It has been reported that an anisotropic magnetic field could produce the three-dimensional alignment of fine single-crystal particles with the orthorhombic crystal structure.However,the three-dimensional alignment was achieved only in suspensions.Fabrication of bulk"single"materials that have the three-dimensional alignment of grains has been desired.This study proposes a procedure for the fabrication,which consists of slip casting under an oscillating magnetic field and sintering.Optimization of casting and sintering conditions achieved the three-dimensionally aligned bulkβ-FeSi₂.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Cooperative Control by System Voltage Control Equipments in Consideration of Reducing Capacity of STATCOM

In recent years, the number of renewable energy sources (RESs) such as photovoltaic generation systems and wind power generation systems connected to the grid has been increasing as a way of reducing negative effects on the environment. The outputs of these RESs vary rapidly because of the influence of the weather and the conditions of the location. Therefore, there are concerns that the point voltages in a distribution system may vary drastically and that the voltages may deviate from the appropriate voltage range as a result of the influence of the RES connected to the distribution system or to the diversification of loads. Furthermore, there are concerns about adverse effects on electric power quality, such as voltage imbalances and harmonics. In this paper, we propose a cooperative voltage control method for a distribution system using system voltage control equipment in order to reduce the capacity of the static synchronous compensator. Numerical calculations were performed in order to verify the validity of the proposed method.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.     

Uncooled InAs0.09Sb0.91 photoconductors with cutoff wave- length extended to 11.5 μm

Uncooled InAsSb photoconductors were fabricated. The photoconductors were based on InAs0.05Sb0.95 and InAs0.09Sb0.91 thick epilayers grown on InAs substrates by melt epitaxy (ME). Ge immersion lenses were set on the photoconductors. The cutoff wavelength of InAs0.09Sb0.91 detectors is obviously extended to 11.5 mm, and that of InAs0.05Sb0.95 detectors is 8.3 mm. At room temperature, the peak detectivity of Dλp at wavelength of 6.8 mm and modulation frequency of 1 200 Hz is 1.08×109 cm.Hz1/2.W-1 for InAs0.09Sb0.91 photoconductors, the detectivity D at wavelength of 9 mm is 7.56×108 cm.Hz1/2.W-1, and that at 11 mm is 3.92×108 cm.Hz1/2.W-1. The detectivity of InAs0.09Sb0.91 detectors at the wavelengths longer than 9 mm is about one order of magnitude higher than that of InAs0.05Sb0.95 detectors, which rises from the increase of arsenic (As) composition in InAs0.09Sb0.91 materials.     

Bactericidal effect of cationic hydrogels prepared from hydrophilic polymers

This study investigated whether hydrogels comprising hydrophilic cationic polymers have similar bactericidal effects. Bacteria were seeded on hydrogels and agar and their viability was assessed with time. Cationic hydrogels displayed bactericidal effects upon long-term bacterial contact. Furthermore, we assessed the areal density of cationic monomer unit of the cationic hydrogels, water content, and the initial elastic modulus. We examined correlations between each factor and bacterial death ratios; consequently, the bacterial death ratios were strongly correlated with the areal density of cationic hydrogel monomers. Elastic energy (W_el) generated at the cytomembrane ion-binding region and the cationic hydrogel and the cytomembrane interfacial energy (W_f) were estimated; consequently, W_el exceeded W_f at higher contact areas. The cationic hydrogel may extract cytomembranes with a reasonable adsorption area. Therefore, cationic hydrogels may be used as probes for ultrasonic echo to sterilize medical equipment.     

Supplementation of the diet of dairy cows with trehalose results in milk with low lipid peroxide and high antioxidant content

The objective of this study was to investigate the effect of dietary supplementation with the disaccharides trehalose and cellobiose on antioxidant activity in rumen fluid, blood, and milk of dairy cows. Nine Holstein dairy cows housed in a free-stall barn were divided into 3 groups, with each group receiving a different dietary treatment (a control diet, a 1% trehalose-supplemented diet, or a 1% cellobiose-supplemented diet) following a 3 × 3 Latin square design. Feed intake and milk production increased in cows receiving the trehalose-supplemented diet compared with those receiving the control and cellobiose-supplemented diets. The total protozoa numbers in the rumen fluid of cows fed trehalose- or cellobiose-supplemented diets were greater than those of the control group. The C18:0 and C18:1 fatty acid content was increased in the milk of cows fed the trehalose-supplemented diet compared with that of the control group, and the C18:3n-3 fatty acid content in the milk of cows fed the cellobiose-supplemented diet was less than that of the control group. Plasma biochemical parameters were unchanged among the different treatments. In rumen fluid, 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity and superoxide dismutase activity were increased 2 h after feeding in cows receiving the cellobiose-supplemented diet compared with the control group, and the concentration of thiobarbituric acid reactive substances in the rumen fluid of cows fed the cellobiose-supplemented diet was decreased. In contrast, the values of these parameters measured in the milk of cows fed the cellobiose-supplemented diet were no different from those of control cows. Dietary supplementation with trehalose did, however, bring about an improvement of the oxidative status of milk and blood in these animals compared with controls. These results provide the first evidence supporting the use of dietary disaccharides to decrease lipid peroxide levels and increase the antioxidant content of dairy cow milk. The findings suggest that disaccharides, particularly trehalose, might be useful as supplements for reducing oxidative stress and improving the quality of milk for human consumption, as well as possibly impairing the processes that give rise to lipid oxidation odor in dairy cow milk.