Influences of electroosmotic flows in nanopillar chips on DNA separation: Experimental results and numerical simulations

The various potential factors affecting the performance of nanopillar chips on DNA separation were investigated from the viewpoints of both numerical calculations and actual experiments. To yield higher performance and replace the conventional DNA separation techniques such as microchip electrophoresis, the phenomenon specific to the nanopillar chips should be deeply understood. In this paper, although various factors affecting the performance of the nanopillar chips are considered, we focused on the effect of electroosmotic flow, which is particularly noticeable in quartz-made nanopillar chips. High-resolution separation of DNA was realized when an electroosmotic flow was suppressed by simply using a higher concentration of buffer, but DNA separation failed in the presence of an electroosmotic flow. It was confirmed from the numerical simulations and the direct observations that the deformation of DNA band during the injection process was induced by electroosmotic flow and consequently led to a poor resolution.     

EPR study of the electronic states of β′-(BEDT-TTF)(TCNQ)

β′-(BEDT-TTF)(TCNQ) is a compound of BEDT-TTF (=ET) and TCNQ molecules aligned orthogonally with each other, forming two-dimensional sheets and one-dimensional columns of 1/4-filled π band, respectively. It is known that the metal-insulator transition occurs at 330 K at ambient pressure. We have measured the electronic spin susceptibility by means of the EPR-NMR method at 50 MHz, and the angular dependence of g-factor and line width of EPR both at Q (34 GHz) and W (94 GHz) band. We successfully confirmed that the antiferromagnetic transition occurs in ET sheets and TCNQ columns, independently.     

Characterization of GH3 cells overexpressing basic fibroblast growth factor (FGF-2)

Basic fibroblast growth factor (FGF-2) is not only a potent mitogen for various cells but also a multifunctional factor with angiogenic and chemotactic activity, and the capacity to induce the synthesis of various proteinases and to modulate endocrine function. To clarify the role played by FGF-2 in the progression of pituitary tumor, we fused rat FGF-2 cDNA to the promoter SR alpha, consisting of the early promoter of SV40 and HTLV(I)-LTR, and we cotransfected GH3 cells with pSV2-neo by an electroporation method. After selection by G418, we obtained 7 neomycin-resistant clones. Southern blot analysis of genomic DNA revealed the presence of transfected rat FGF-2 cDNA in 4 of the 7 clones. To measure FGF-2 molecules, we established a new immuno-fluorometric assay system, using 3 monoclonal antibodies against different portions of human FGF-2. This assay had a minimum sensitivity of 10 pg/ml and cross-reacted neither with acidic fibroblast growth factor (FGF-1) nor insulin-like growth factor 1 (IGF-1), even at a concentration of 100 ng/ml. Although FGF-2 was undetectable in the culture medium of any of the clones, the cell homogenate contained a significant amount of FGF-2 (7.2 ng/mg protein) in 1 of the 4 FGF-2-transfected clones (GH3FGF(+)), whereas FGF-2 was not detected (< 5.2 pg/mg protein) in the cell homogenates of either the parent GH3 cells or the control cells transfected with pSV2-neo alone (GH3FGF(-)), GH3FGF(+) grew as adherent cells and formed epithelial sheets with a growth rate similar to that of control cells. The amount of prolactin(PRL) released by TRH was greater in GH3FGF(+) than that in GH3 or GH3FGF(-). On the other hand, the sensitivity to SRIF was increased in GH3FGF(+) compared with that in other clones. The findings of these in vitro studies indicate that FGF-2, if it is expressed in pituitary tumor cells, plays little if any role in cell growth but may modulate certain cell functions such as responsiveness to hormones.     

Cost reduction of polycrystalline diamond compact bits through improved durability

This work reports the results of laboratory drilling tests conducted in order to measure improvements due to design and cutter modifications on PDC bits intended for use in geothermal well drilling. These tests, using 142.88 mm-dia. PDC full face bits, concentrated on improvements in bit life and cost performance. The tests were performed using granite drilling samples and a laboratory drilling machine at atmospheric conditions. The results from changes in bit and cutter shape are reported in the work.     

Switched-Capacitor Track-and-Hold Amplifiers With Low Sensitivity to Op-Amp Imperfections

This paper describes high-precision switched-capacitor (SC) track-and-hold amplifier (THA) stages. They use a novel continuous-time correlated double sampling (CDS) scheme to desensitize the operation to amplifier imperfections. Unlike earlier predictive-CDS amplifiers, the circuits do not need a sampled-and-held input signal for their operation. During the tracking period, an auxiliary continuous-time signal path is established, which predicts the output voltage during the holding period. This allows accurate operation even for low amplifier gains and large offsets over a wide input frequency range. Extensive simulations were performed to compare the performance of the proposed THAs with earlier circuits utilizing CDS. The results verify that their operation is far more robust than that of any previously described SC amplifiers     

Wideband and high-gain negative-feedback AGC amplifier for high-speed lightwave digital transmission systems

A negative-feedback AGC amplifier based on a new circuit configuration concept is proposed and monolithically integrated. The amplifier exhibits characteristics 2.5 times superior to those of the conventional AGC amplifier: 410 MHz bandwidth, 16 dB maximum gain and 18 dB gain dynamic range.     

Intrathoracic vagal nerve schwannoma preoperative diagnosis is correct because of clinical and characteristic CT findings--a case report and review of the literature

BACKGROUND: Blister formation and tissue damage in bullous pemphigoid have been attributed to the release of eosinophil granule proteins--namely, to eosinophil derived cationic protein (ECP) and major basic protein (MBP). In the present investigation these eosinophil granule proteins were studied in the conjunctiva of patients with ocular cicatricial pemphigoid (OCP). METHODS: Conjunctival biopsy specimens obtained from patients with subacute (n = 8) or chronic conjunctival disease (n = 13) were analysed histologically and immunohistochemically using antibodies directed against EG1 (stored and secreted ECP), EG2 (secreted ECP), MBP, CD45 (common leucocyte antigen), CD3 (pan T cell marker), and HLA-DR (class II antigen). RESULTS: Subepithelial mononuclear cells, mast cells, and neutrophils were detected in all specimens. The number of mononuclear cells, neutrophils, CD45+ cells, CD3+ cells, and the HLA-DR expression were significantly higher in the subacute than in the chronic disease group. Some eosinophils were found in specimens from five of eight patients with subacute OCP, but in none of the patients with chronic disease. The eosinophil granule proteins (ECP and MBP) were found in the epithelium and substantia propria in patients with subacute conjunctivitis. CONCLUSIONS: Subepithelial cell infiltration in the conjunctiva greatly differs between subacute and chronic ocular cicatricial pemphigoid specimens. The findings suggest that eosinophil granule proteins may participate in tissue damage in acute phase of inflammation in OCP.     

Three-dimensional organization of collagen fibrils during corneal stromal wound healing after excimer laser keratectomy

PURPOSE: To investigate the structural changes in corneal stromal collagen fibrils after excimer laser keratectomy in relation to the degree of corneal haze. SETTING: University of Tokyo Hospital, Tokyo, Japan. METHODS: Corneal haze was quantitatively measured by analyzing the light scattering in Scheimpflug images of the corneas of white rabbits after excimer laser keratectomy. Collagen fibril structure was examined using scanning electron microscopy after chemical digestion with sodium hydroxide solution; the same specimens were examined by transmission electron microscopy after re-embedding. RESULTS: Corneal haze reached a peak 4 weeks after excimer laser keratectomy and then gradually decreased. The collagen fibrils of the normal cornea were regularly arranged parallel to the surface of the cornea, with small interfibrillar distances. After excimer laser keratectomy, the arrangement was highly disordered, with increased interfibrillar distances. These structural changes were most prominent 4 weeks after excimer laser keratectomy. CONCLUSION: The structural changes in the collagen fibrils of the corneal stroma, especially the increase in interfibrillar distances and the disordered arrangement, were associated with corneal haze after excimer laser keratectomy.     

Building a CIM system for compound plant: Utilization of distributed processing system

The position of a production management system in a computer-integrated manufacturing (CIM) system is to serve as the nucleus of the plant CIM system that connects the plant production to other departments such as marketing, research and development, and distribution departments. A production management system that integrates the flow of goods with information in a plant, and thus manages production in it, was developed as the first step toward application of CIM to a powder plant. The method of building a distributed system is one way to build a CIM system. This method creates a system in the required function units, which are connected by a network to expand the system function. It offers advantages in extensibility, flexibility, and rapid implementation.