Surface passivation of the thin‐film LAPS with perhydropolysilazane‐derived silica treated by O2 plasma

Here, we describe a novel method for surface passivation of the thin‐film light addressable potentiometric sensor (LAPS). To form a uniform passivation layer, perhydropolysilazane (PHPS) was utilized as a spin‐coatable precursor of silica. After transformation of PHPS into silica by baking, we introduced an O₂ plasma treatment aiming for enhancement of the water resistance of the PHPS‐derived silica (PDS) film by completing the PHPS‐to‐silica conversion. To confirm the effect of the O₂ plasma treatment, the PDS film was deposited on a thin‐film LAPS electrode and tested by immersion in a cell culturing medium. The immersion test demonstrated that the plasma‐treated PDS film could keep the electrode stable longer than the untreated could. With the treated PSD film of 600 nm in thickness, a lifetime of the thin‐film LAPS was estimated at over 2 weeks, which is sufficient for cell culturing experiments. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Growth of β-Ga2O3 nanocolumns crossing perpendicularly each other on MgO (1 0 0) surface

β-Ga₂O₃ nanocolumns straightened and crossed perpendicularly each other were deposited on MgO (1 0 0) substrate by vapor phase transport method. Growth of the nanocolumns was examined at steps of 1000, 1050, and 1200 °C in elevation of source-boat temperature. We have drawn out the substrate from deposition-tube at each source-boat temperatures of 1000, 1050, and 1200 °C. Scanning electron microscopy of the sample with source-boat temperature of 1200 °C demonstrated that the straightened and elongated nanocolumns are crossing perpendicularly each other. Typical lengths of the nanocolumns were in the range of several hundreds nanometers below 1050 °C, and those of 1200 °C were in the range of ten to fifteen hundreds nanometers. Diameters of the nanocolumns stayed in the range of few hundreds nanometers, notwithstanding variation of the source temperature. X-ray diffraction and transmission electron microscopy with energy dispersive X-ray spectroscopy revealed that the nanocolumns are monoclinic β-Ga₂O₃ crystal, and the (4 0 0) plane of β-Ga₂O₃ nanocolumns is parallel to the (1 0 0) plane of MgO substrate.     

Rapid discharge performance of composite electrode of hydrated sodium manganese oxide and acetylene black

Hydrated sodium manganese oxide was synthesized by reducing permanganate ion using ethanol by a sol–gel method. By including acetylene black in the synthetic reaction, we obtained composite materials in which sodium manganese oxide hydrate particles were small and mixed well with the acetylene black. We evaluated those composites as a lithium battery cathode and found that they showed 170 mA h g⁻¹ under 5 mA g⁻¹ and 117 mA h g⁻¹ under 5 A g⁻¹ on the basis of composite weight. This rapid discharge performance was probably caused by the favorable contact condition of the composite constituents.     

Knoop Microhardness Anisotropy and the Indentation Size Effect on the Basal Plane of Single-Crystal Alumina (Sapphire)

The Knoop microhardness anisotropy profile was determined for the basal plane of a Czochralski grown alumina single crystal for indentation test loads from 100 through 1000 g. Microhardness maxima occur at low indentation test loads for the long axis of the Knoop indenter parallel to the 〈2[Onemacr][Onemacr]0〉. Minima exist for the long axis parallel to the 〈10[Onemacr]0〉. This low indentation test load profile is attributed to slip on the primary slip system, the (0001)〈[Onemacr][Onemacr]20〉, as previously noted by Brookes and co-workers. The degree of the microhardness anisotropy decreases for higher indentation test loads. This results from the activation of multiple slip systems to accommodate the greater amounts of plastic flow required by the larger indentation sizes. The microhardness profile becomes more uniform with increasing indentation test load until the Knoop microhardness approaches a test-load-independent, orientation-independent microhardness of 1167 ± 34 kg/mm². The indentation size effect (ISE) was further investigated through lubricated indentation hardness measurements. Lubrication of the test specimen surface significantly reduces the ISE. Results indicate that friction between the test specimen surface and the indenter facets is a major portion of the ISE.     

Preparation and Electric Properties of Dense Nanocrystalline Zinc Oxide Ceramics

This communication reports on the preparation and electric properties of dense nanocrystalline ZnO ceramics. By spark plasma sintering, nanocrystalline (∼100 nm) ZnO ceramics with a high density of 98.5% were obtained at a very low temperature of 550°C. Electric property measurement revealed a novel conduction nonlinearity in the sample sintered at 500°C. This phenomenon is due to the nanometerization of ZnO crystal and the grain boundary layer with an amorphous interfacial layer.     

Structure–Property Relationship in BT-Based Dielectrics for Ni-MLCC: Modification of Grain Boundary

Structure–property relationship in BaTiO₃ (BT)-based dielectrics for multi-layer ceramic capacitors with nickel internal electrode was investigated using samples having various HoO_3/2 concentrations by measuring temperature characteristics of capacitance, voltage–current characteristics, lifetime at highly accelerated life test, high-resolution analytical electron microscope, and frequency response at elevated temperature and ultra-low frequency. It was concluded that the addition of Ho affected the shell and grain boundary (GB) characteristics. Incorporation of Ho into BT perovskite lattice and the change in GB characteristics along with the doped concentration of HoO_3/2 were discussed to better understand the role of doped Ho₂O₃.     

Narrow multi-walled carbon nanotubes produced by chemical vapor deposition using graphene layer encapsulated catalytic metal particles

The use of graphene layer encapsulated catalytic metal particles for the growth of narrower multi-walled carbon nanotubes (MWCNTs) has been studied using plasma-enhanced chemical vapor deposition and conventional thermal CVD. Ni–C or Fe–C composite nanoclusters were fabricated using the dc arc discharge technique with metal–graphite composite electrodes carrying a current of 100–200 A in a stainless-steel chamber filled with He and CH₄ mixture gas at 27 kPa. Nano-sized grains with diameters less than 10 nm were fabricated and deposited on a Si substrate, and were used as a catalyst for MWCNT growth. Structural analyses of the composite nanoclusters and MWCNTs were carried out using transmission electron microscopy. The results show that the diameters of the MWCNTs were reduced from 50–100 nm for a conventional Ni thin film-evaporated Si substrate to a minimum of roughly 2–4 nm in the present study.     

Preparation of micro-dot electrodes of LiCoO2 and Li4Ti5O12 for lithium micro-batteries

Fabrications of micro-dot electrodes of LiCoO₂ and Li₄Ti₅O₁₂ on Au substrates were demonstrated using a sol-gel process combined with a micro-injection technology. A typical size of prepared dots was about 100 μm in diameter, and the dot population on the substrate was 2400 dots cm⁻². The prepared LiCoO₂ and Li₄Ti₅O₁₂ micro-dot electrodes were characterized with scanning electron microscopy, X-ray diffraction, micro-Raman spectroscopy, and cyclic voltammetry. The prepared LiCoO₂ and Li₄Ti₅O₁₂ micro-dot electrodes were evaluated in an organic electrolyte as cathode and anode for lithium micro-battery, respectively. The LiCoO₂ micro-dot electrode exhibited reversible electrochemical behavior in a potential range from 3.8 to 4.2 V versus Li/Li⁺, and the Li₄Ti₅O₁₂ micro-dot electrode showed sharp redox peaks at 1.5 V.     

The Effects of Different Types of Maleic Anhydride-Modified Polypropylene on the Physical and Mechanical Properties of Polypropylene-based Wood/Plastic Composites

Maleic anhydride-modified polypropylene (MAPP) is a compatibilizer used to improve the physical and mechanical properties of many wood/plastic composites (WPCs). The properties of WPCs containing MAPP differ according to the characteristics of the specific MAPP that it is used. In this study, the physical and mechanical properties, including shear viscosity, of polypropylene-based WPCs containing different types of MAPP were investigated before and after water absorption. The shear viscosity of MAPP increased with increasing molecular weight, but remained nearly constant for WPCs containing different types of MAPP. In dry conditions, the strongest WPC contained the MAPP with the highest acid value. The highest flexural modulus was observed with the WPC containing the MAPP with the highest molecular weight. In wet conditions, the WPC exhibiting the best mechanical properties contained a MAPP with a molecular weight of 58,000.