Chemical vapor deposition of boron- and nitrogen-containing graphene thin films

Boron and nitrogen-incorporated graphene thin films were grown on polycrystalline Ni substrates by thermal chemical vapor deposition using separate boron- and nitrogen-containing feedstocks. Boron and nitrogen atoms were incorporated in the film in almost equal amounts and the total content reached ∼28%. The film predominantly consisted of separate graphene and boron nitride domains. Carrier concentration in the graphene domains was estimated to be about 1 × 10⁻³ e/atom (3.8 × 10¹² cm⁻²) from G band shift in Raman spectra.     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Effect of the atmosphere on chemical composition and electrochemical properties of solid electrolyte interface on electrodeposited Li metal

Many efforts have been paid to realize the superior anodes for future Li batteries in either the dry Ar atmosphere or the dry air atmosphere. In this work, in order to clarify the effects of such atmospheres, the most reactive anodes of Li were freshly electrodeposited under the dry Ar or under the dry air condition. The Solid Electrolyte Interface (SEI) formed during the electrodeposition of Li anodes is revealed to have a different chemical composition and protective feature. The Li deposited under the dry air was revealed to have longer cycle life in the electrolyte than that deposited in Ar, even in the electrolyte containing ionic liquid. From the XPS results, the SEI formed in dry air is proved to be different from that formed in Ar gas atmospheres, that is, the SEI formed in dry air consists of Li₂CO₃ and Li nitride. In order to improve the performance of the anodes, the atmosphere for the initial preparation of the anode/electrolyte interface should be tuned.     

Methylcyclohexane dehydrogenation for hydrogen production via a bimodal catalytic membrane reactor

The dehydrogenation of methylcyclohexane (MCH) to toluene (TOL) for hydrogen production was theoretically and experimentally investigated in a bimodal catalytic membrane reactor (CMR), that combined Pt/Al₂O₃ catalysts with a hydrogen‐selective organosilica membrane prepared via sol‐gel processing using bis(triethoxysilyl) ethane (BTESE). Effects of operating conditions on the membrane reactor performance were systematically investigated, and the experimental results were in good agreement with those calculated by a simulation model with a fitted catalyst loading. With H₂ extraction from the reaction stream to the permeate stream, MCH conversion at 250°C was significantly increased beyond the equilibrium conversion of 0.44–0.86. Because of the high H₂ selectivity and permeance of BTESE‐derived membranes, a H₂ flow with purity higher than 99.8% was obtained in the permeate stream, and the H₂ recovery ratio reached 0.99 in a pressurized reactor. A system that combined the CMR with a fixed‐bed prereactor was proposed for MCH dehydrogenation. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1628–1638, 2015     

Boronic acid‐based thin films that show saccharide‐responsive multicolor changes

A novel saccharide sensor that displays a distinct color change resembling a “traffic signal” was developed. By copolymerizing boronic acid and amine monomers on a glass plate, a boronic acid‐containing thin film was obtained. Anionic blue and yellow dyes were adsorbed on the thin film, and the film was immersed in aqueous saccharide solutions containing a cationic red dye. With increase in the saccharide concentration in the solution, the thin film changes color from green to red via yellow. The observed distinct changes in color were attributed to a stepwise release and binding of dyes. The sensitivity of the saccharide sensor was dependent on the monomer composition of the thin film and increased with increasing the boronic acid content. The pH of the saccharide solution was another key factor affecting the sensing behavior, and glucose‐responsive color changes were significantly enhanced at pH 7.8. By optimizing these conditions, significant color changes in response to glucose were achieved. Saccharide selectivity was found to be in the following order: fructose > glucose > galactose = mannose > sucrose. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42679.     

Measurement method of plasma current and density in atmospheric pressure plasma jet

We present a measurement method of the plasma current and density in an atmospheric‐pressure plasma generated using a quartz tube, helium gas, and copper foil electrode by applying a high RF voltage. The plasma in the form of a bullet is released as a plume or jet into the atmosphere. To study the characteristics of the atmospheric‐pressure plasma, the plasma current is measured using a current probe, and the drift velocity of plasma plume is measured using a photodetector. The current of the plasma plume is estimated by subtracting the ground line current from the power line current in the circuit. The density of plasma plume n is estimated from the plasma plume current I and the drift velocity v as I = envS, where S is the cross section of plasma plume. The density of the released plasma into the atmosphere is estimated as ∼10¹⁸ m⁻³ by the method. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of biobased microwave absorbing composites with various magnetic metals and carbons

The preparation and characterization of a biobased electromagnetic absorbing composites derived from natural lacquer as a renewable resource with microwave‐absorption fillers, including Ni–Zn ferrite and carbonyl iron (CI) as magnetic metals and soot and carbon nanotube (CNT) as carbon materials, were investigated in terms of the gel content, hardness, drying properties, and electromagnetic absorption properties. Interestingly, composites with ferrite and CI contained up to 320 and 550 wt %, respectively, of these compounds. This quite high loading capacity of the metal fillers in a natural‐lacquer base could have been due to the high compatibility between the filler and the natural lacquer; this indicated that the natural lacquer worked as a binder for these metals. The morphology of the biobased composite was characterized by scanning electron microscopy. The electromagnetic absorption properties of composites were characterized in the frequency range from 0.05 and 20 GHz by the reflection loss (RL) measurement method in terms of the kind of fillers and filler loading. The natural lacquer did not affect the absorption properties of the fillers. Biobased composites showed over 99% electromagnetic absorption in the frequency range 3.0–4.0 GHz for 280 wt % ferrite and 8.9–9.7 GHz for 200 wt % CI. Conversely, 10 and 20 wt % soot exhibited good performance (RL < ?20 dB) between 16.5 and 17.3 and between 8.8 and 9.2 GHz, respectively. The areas with RL values of less than ?20 dB of the CNT composites were 10.4–11.0 GHz for 5 wt % and 14.6–15.2 GHz for 10 wt %. Hence, natural lacquer can be used as a binder material for electromagnetic absorption composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44131.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Boiling heat transfer characteristics of a sulfuric-acid flow in thermochemical iodine–sulfur cycle

The Japan Atomic Energy Agency has been conducting research and development on the thermo-chemical iodine–sulfur (IS) process, which is one of the most attractive water-splitting hydrogen production methods that uses nuclear thermal energy. The sulfuric acid decomposer is one of the key components of the IS process. The boiling heat transfer coefficients of sulfuric acid solutions are required to design the sulfuric acid decomposer. These coefficients were measured in aqueous solutions where the mole fraction of H₂O ranged from 0.17 to 0.37 (heat flux range from 16.9 kW/m² to 5.6 kW/m²) and compared with the empirical correlations formulated for binary mixtures. A combination of the Stephan–Körner correlation, using the empirical constant A₀ = 2.00, and the Nishikawa–Fujita correlation was used to predict the experimental results with an accuracy of ±10%.