Processability and mechanical properties for binary blends of PP and LLDPE produced by metallocene catalyst

Processability at extrusion coating and mechanical properties of the films obtained are investigated by means of linear and nonlinear rheological measurements and tensile tests for blends of polypropylene (PP) and linear low‐density polyethylene (LLDPE). Both materials are produced by metallocene catalyst. The processability of PP is found to be improved by the addition of LLDPE; the blend shows low level of motor torque and head pressure in an extruder and small level of neck‐in as compared with pure PP. Further, the anisotropy of ultimate tensile strength, which is prominent for PP, is reduced by blending with LLDPE. As a result, the blend having 20 wt % of LLDPE shows appropriate properties in the molten state for extrusion coating and in the solid state as a film. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Photocatalytic decomposition of 2-propanol in air by mechanical mixtures of TiO2 crystalline particles and silicalite adsorbent: The complete conversion of organic molecules strongly adsorbed within zeolitic channels

Fundamental photocatalytic behaviors were investigated for mechanical mixtures of TiO₂ crystalline particles (P25) and MFI type zeolite (silicalite) in the decomposition reaction of 2-propanol vapor in air for the first time. Mechanical mixing enables reliable comparisons to be made between photocatalysts because the contents of TiO₂ and the adsorbent can be widely varied (51 times in this study) while keeping the particle size and crystallinity of TiO₂ unchanged. That is, the use of mechanical mixture highlights the behavior of molecules adsorbed in the microporous crystals, keeping the TiO₂ unchanged. In the case of the mixed photocatalysts, the initial 2-propanol concentration in the gas phase was significantly reduced because of adsorption into the zeolite. After photo-irradiation started, 2-propanol was decomposed to CO₂ with no (or trace amount of) acetone detected in the gas phase. The analysis of final amount of CO₂ formed by the decomposition demonstrated that just by the mechanical mixing of TiO₂ and zeolite, the TiO₂ photocatalyst decomposed completely the reactant and intermediate molecules strongly adsorbed into the zeolite. On the other hand, in reference experiments in which TiO₂ and zeolite were not mixed and were separately placed in a photoreactor, the organic compounds strongly adsorbed in the zeolite could not be decomposed to CO₂ by the photocatalyst. It is notable that the CO₂ formation rates for the mixed photocatalysts were mostly constant for those comprising 40 wt% or larger amounts of zeolite, while being slower than for pure TiO₂. The rate-determining step was discussed based on these data. The present study showed that the mixed photocatalyst could remove organic vapors by adsorption in the dark and decompose completely to CO₂ at moderate reaction rates under photo-irradiation with minimized evolution of intermediate molecules into the gas phase.     

Modeling of diffusive mass transport in micropores in cement based materials

In order to predict long-term leaching behavior of cement constituents for safety assessments of radioactive waste disposal, we modeled diffusive mass transport in micropores in cement based materials. Based on available knowledge on the pore structure, we developed a transport porosity model that enables us to estimate effective porosity available for diffusion (transport porosity) in cement based materials. We microscopically examined the pore structure of hardened cement pastes to partially verify the model. Effective diffusivities of tritiated water in hardened cement pastes were also obtained experimentally, and were shown to be proportional to the estimated transport porosity.     

Wet Atomisation of Gd‐doped CeO2 Electrolyte Slurries for Intermediate Temperatures' Microtubular SOFC Applications

A wet atomising system has been employed as a novel method to prepare ultrafine Gd‐doped CeO₂ (GDC) electrolyte slurries. By changing the fluid flow pressure and repeating the atomisation process several times for the same atomised slurries, we have obtained optimised ultrafine GDC slurry with high‐dispersed and homogeneous distribution. The sizes of the particles of GDC were in the range of tens of nanometres. A highly dense electrolyte layer (membrane) was prepared using the ultrafine GDC slurries for intermediate temperatures microtubular solid oxide fuel cell (SOFC) applications. The SOFC was fabricated by using supporting porous anode tubes of NiO and GDC, and the cathode consisted of La_0.6Sr_0.4Co_0.2Fe_0.8O_3–y and GDC. A dense 10 μm GDC electrolyte layer was obtained at a lower sintering temperature of 1,250 °C for 1 h. The SOFC was tested with humidified (3% H₂O) hydrogen as a fuel and the static air as an oxidant, and the tubular cell maintained its high performance even at 500 °C.     

Further Investigations on the Promoting Effect of Mesoporous Silica on Base-Catalyzed Aldol Reaction

Addition of an ordered mesoporous silica to a mixture of an aldol reaction, comprising 4-nitrobenzaldehyde with acetone catalyzed by organic amines, caused significant increase in the reaction rate to afford the β-hydroxyketone in high yield. A cooperative effect between the surface silanol and amine was considered to be the likely reason for the rate-enhancement, which was supported by FTIR spectroscopy.     

Highly unsaturated fatty acid might act as an antioxidant in emulsion system oxidized by azo compound

Now it is recognized that DHA is oxidatively stable fatty acid compared with linoleic acid (LA) in emulsified system, although DHA is oxidatively unstable in a bulk system. In fact, an emulsified mixture of DHA and LA behaves as in a bulk system, namely the oxidative stability of DHA becomes lower than that of LA. Therefore, in this study, tridocosahexaenoate (DDD) and glycerol trilinoleate (LLL) were separately emulsified using TritonX-100 as an emulsifier and DDD emulsion was mixed with the oxidizing LLL emulsion using a water-soluble radical initiator, 2,2'-azobis(2-aminopropane) dihydrochloride. As a result, DHA suppressed the oxidation of LA, while DHA was not significantly oxidized. This suppression ability was examined using glycerol trieicosapentaenoate, glycerol trilinolenate, or glycerol trioleate instead of DDD and it was found that this activity was increased with the increasing number of double bonds in the structure. Furthermore, the same type of experiment was carried out using a lipid-soluble radical initiator, 2,2'-azobisisobutyronitrile and the similar result was obtained. These results indicated that a highly polyunsaturated fatty acid might act as an antioxidant in an emulsion system oxidized by an azo compound.     

Precision die-casting of optical MU/SC conversion sleeve

The performance of MU/SC conversion sleeve produced by bulk metallic glass (Zr₅₅Al₁₀Ni₅Cu₃₀) was examined. A precision die-casting method was applied to improve size accuracy. The size accuracy of the conversion sleeve produced by the precision die-casting method was ±1 μm, and optical insertion loss (Li) was less than 0.3 dB for a standard value. The wear resistance of metallic glass is improved by surface oxidation treatment in air at 673 K. The MU/SC conversion sleeve produced from bulk metallic glass has superior characteristics for optical parts.     

3D Structures of IgA,IgM, and Components

Immunoglobulin G (IgG) is currently the most studied immunoglobin class and is frequently used in antibody therapeutics in which its beneficial effector functions are exploited. IgG is composed of two heavy chains and two light chains, forming the basic antibody monomeric unit. In contrast, immunoglobulin A (IgA) and immunoglobulin M (IgM) are usually assembled into dimers or pentamers with the contribution of joining (J)-chains, which bind to the secretory component (SC) of the polymeric Ig receptor (pIgR) and are transported to the mucosal surface. IgA and IgM play a pivotal role in various immune responses, especially in mucosal immunity. Due to their structural complexity, 3D structural study of these molecules at atomic scale has been slow. With the emergence of cryo-EM and X-ray crystallographic techniques and the growing interest in the structure-function relationships of IgA and IgM, atomic-scale structural information on IgA-Fc and IgM-Fc has been accumulating. Here, we examine the 3D structures of IgA and IgM, including the J-chain and SC. Disulfide bridging and N-glycosylation on these molecules are also summarized. With the increasing information of structure–function relationships, IgA- and IgM-based monoclonal antibodies will be an effective option in the therapeutic field.     

EXAFS Study on Structural Change of Charcoal-supported Ruthenium Catalysts during Lignin Gasification in Supercritical Water

Lignin gasification in supercritical water over charcoal supported ruthenium trivalent salts was studied using a batch reactor at 673 K. Ruthenium (III) nitrosyl nitrate on charcoal (Ru(NO)(NO₃)₃/C) was more active than ruthenium (III) chloride on charcoal (RuCl₃/C) for the gasification reaction. EXAFS analysis revealed that ruthenium metal particles were formed in both RuCl₃/C and Ru(NO)(NO₃)₃/C catalysts during the lignin gasification and that the size of ruthenium metal in Ru(NO)(NO₃)₃/C was smaller than that in RuCl₃/C. It was concluded that well-dispersed ruthenium metal particles were active for the lignin gasification in supercritical water.     

Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008