Size Measurement of Polystyrene Latex Particles Larger than 1 Micrometer using a Long Differential Mobility Analyzer

We describe a newly constructed annular-type differential mobility analyzer (DMA) with an effective electrode length of 60 cm, which is longer than that of our original DMA (40 cm length). This long DMA was developed to extend the classification size of particles measuring up to 1.5 μm. As an application of this DMA, the mean diameters and standard deviations were determined for six samples of monodisperse polystyrene latex (PSL) particles ranging from 0.94 to 1.27 μm in nominal diameter. These PSL particles suspended in double-distilled water were aerosolized by a glass nebulizer and then introduced into the DMA. The mean diameters and standard deviations of these PSL particles were calculated by Ehara's method and compared with the nominal diameters and uncertainties. There was good correlation between the nominal diameters of these samples—particularly for recently certified samples—and the measured diameters. Classification of aerosol particles more than 1 micrometer in diameter using this DMA will be useful for many purposes.     

The content of tocopherols and oxidative quality of oils prepared from sunflower (Helianthus annuus L.) seeds roasted in a microwave oven

Sunflower seeds ((Helianthus annuus were roasted for 6, 12, 20 or 30 min at a frequency of 2450 MHz using a domestic microwave oven. After the kernels were separated from the sunflower seeds, the quality characteristics and the compositions of the oils were investigated in relation to their tocopherol distributions, and they were further evaluated as compared with an unroasted oil sample. Only minor increases (p < 0.05) in chemical and physical changes of the oils, such as the carbonyl value, the p‐anisidine value and the color development, occurred at a prolonged roasting period. Significant decrease (p < 0.05) was observed in the amounts of phospholipids in the oils after microwave roasting. Nevertheless, compared to the original level, more than 92 wt‐% tocopherols still remained after 30 min of roasting. With a few exceptions, these results indicate that the exposure of sunflower seeds to microwaves for 12 min caused no significant (p < 0.05) loss or change in the content of tocopherols and polyunsaturated fatty acids in the kernels.     

Radiation detector made of a high-quality polycrystalline diamond

Radiation detector was made of a high-quality CVD polycrystalline diamond composed of frost column like structure diamond grains, and induced charge distribution spectra and drift velocities were measured by using alpha particles. As a result, the CVD polycrystalline achieved maximum induced charge of 83% of HP/HT type IIa diamond. Moreover, the CVD crystal had lower charge loss on electrons compared with the HP/HT type IIa diamond. Drift velocities of electrons and holes were v_e = 7.7 × 10⁴ and v_h = 7.3 × 10⁴cm/s at an electric field of 20 kV/cm, respectively. In addition, response function measurement for 14 MeV neutrons was carried out.     

新型高Zn超高强铝合金扁锭铸造工艺研究

采用仿真模拟和试验相结合的方法,研究了一种Zn含量高于AA7055合金的新型超高强铝合金的半连续铸造工艺。结果表明,在满足综合性能要求的前提下,适当降低Zn、Cu含量,提高Mg含量,降低Fe、Si、Mn等杂质元素的含量,有利于铸造成形。工艺研究表明,新型铝合金固-液相区温度范围较宽(170℃),铸造时极易开裂,通过施加挡水板进行模拟及试验研究,成功铸造出180mm×360mm规格无裂纹铸锭。     

Inhibitory Effects of Cholesterol Derivatives on DNA Polymerase and Topoisomerase Activities, and Human Cancer Cell Growth

This paper describes the inhibitory activities of cholesterol derivatives such as cholesterol, sodium cholesteryl sulfate, cholesteryl-5α, 6α-epoxide, cholesteryl chloride, cholesteryl bromide, and cholesteryl hemisuccinate (compounds 1–6, respectively) against DNA polymerase (pol), DNA topoisomerase (topo), and human cancer cell growth. Among the compounds tested, compounds 2 and 6 revealed themselves to be potent inhibitors of animal pols, and the IC₅₀ values for pols were 0.84–11.6 and 2.9–148 μM, respectively. Compounds 2, 3 and 6 inhibited the activity of human topo II, with IC₅₀ values of 5.0, 12.5 and 120 μM, respectively. Compounds 2, 3 and 6 also suppressed human cancer cell (promyelocytic leukemia cell line, HL-60) growth, and LD₅₀ values were 8.8, 20.2 and 72.3 μM, respectively, suggesting that cell growth inhibition had the same tendency as the inhibition of topos rather than pols. Compounds 2 and 6 arrested the cells in S and G2/M phases, compound 3 arrested the cells in the G2/M phase, and these compounds also increased sub-G1 phase in the cell cycle. These results suggested that the effect of cell cycle arrest might be effective on both pols and topos activities. From these findings, the action mode of cholesterol derivatives as anti-cancer compounds is discussed.     

Porphylipoprotein Accumulation and Porphylipoprotein Photodynamic Therapy Effects Involving Cancer Cell-Specific Cytotoxicity

In photodynamic therapy (PDT) for neoplasms, photosensitizers selectively accumulate in cancer tissue. Upon excitation with light of an optimal wavelength, the photosensitizer and surrounding molecules generate reactive oxygen species, resulting in cancer cell-specific cytotoxicity. Porphylipoprotein (PLP) has a porphyrin-based nanostructure. The porphyrin moiety of PLP is quenched because of its structure. When PLP is disrupted, the stacked porphyrins are separated into single molecules and act as photosensitizers. Unless PLP is disrupted, there is no photosensitive disorder in normal tissues. PLP can attenuate the photosensitive disorder compared with other photosensitizers and is ideal for use as a photosensitizer. However, the efficacy of PLP has not yet been evaluated. In this study, the mechanism of cancer cell-specific accumulation of PLP and its cytotoxic effect on cholangiocarcinoma cells were evaluated. The effects were investigated on normal and cancer-like mutant cells. The cytotoxicity effect of PLP PDT in cancer cells was significantly stronger than in normal cells. In addition, reactive oxygen species regulated intracellular PLP accumulation. The cytotoxic effects were also investigated using a cholangiocarcinoma cell line. The cytotoxicity of PLP PDT was significantly higher than that of laserphyrin-based PDT, a conventional type of PDT. PLP PDT could also inhibit tumor growth in vivo.     

Differences between Human and Mouse IgM Fc Receptor (FcµR)

Both non-immune “natural” and antigen-induced “immune” IgM are important for protection against pathogens and for regulation of immune responses to self-antigens. Since the bona fide IgM Fc receptor (FcµR) was identified in humans by a functional cloning strategy in 2009, the roles of FcµR in these IgM effector functions have begun to be explored. In this short essay, we describe the differences between human and mouse FcµRs in terms of their identification processes, cellular distributions and ligand binding activities with emphasis on our recent findings from the mutational analysis of human FcµR. We have identified at least three sites of human FcµR, i.e., Asn66 in the CDR2, Lys79 to Arg83 in the DE loop and Asn109 in the CDR3, responsible for its constitutive IgM-ligand binding. Results of computational structural modeling analysis are consistent with these mutational data and a model of the ligand binding, Ig-like domain of human FcµR is proposed. Serendipitously, substitution of Glu41 and Met42 in the CDR1 of human FcµR with mouse equivalents Gln and Leu, either single or more prominently in combination, enhances both the receptor expression and IgM binding. These findings would help in the future development of preventive and therapeutic interventions targeting FcµR.     

Effect of microstructure on discharge performance of Al–0.8Sn–0.05Ga–0.9Mg–1.0Zn (wt%) alloy as anode for seawater-activated battery

The electrochemical performance and discharge behavior of Al–0.8Sn–0.05Ga–0.9Mg–1.0Zn (wt%) alloys in as-cast, homogenized, and annealed states were investigated through electrochemical means, corrosion rate test, and discharge test in a 3.5 wt% NaCl solution. Results suggest that the discharge performance of this alloy is enhanced by rolling and subsequent annealing treatment. This is attributed to the fact that the microstructure of the alloy is greatly improved through rolling and subsequent annealing treatment. The 400°C-annealed alloy exhibits the most excellent discharge activity than alloys in other states, which is due to more regions being activated by a finer and more uniform Sn-rich phase. Furthermore, the anode efficiency of the 400°C-annealed alloy is higher than that of as-cast and homogeneous alloys due to the more uniform distribution of Sn in the aluminum matrix.     

Expertise and age-related changes in components of intelligence.

In a sample of 263 male GO players at 48 levels of expertise and ranging from 18 to 78 years of age, it was found that factors of expertise deductive reasoning (EDR) and expertise working memory (EWM) were independent of factors of fluid reasoning (Gf) and short-term working memory (STWM) that, along with cognitive speed (Gs), have been found to characterize decline of intelligence in adulthood. The main effects of analyses of cross-sectional age differences indicated age-related decline in EDR and EWM as well as in Gf, STWM, and Gs. However, interaction and partialing analyses indicated that decline in EDR and EWM decreased to no decline with increase in level of expertise. The results thus suggest that with increase in factors known to raise the level of expertise—particularly, intensive, well-designed practice there may be no age-related decline in the intelligence that is measured in the abilities of expertise. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Novel Phase Transition in BaPr2Mn2O7

The rare earth manganite BaLn2Mn2O7 (Ln=rare earth element) has a Sr3Ti2O7-type layered perovskite structure with double-block oxygen octahedra belonging to the Ruddlesden-Popper-type homologous series AO(ABO3)2. In Pr-manganite, a novel phase transition was first observed in situ at 1040 K by a thermal transmission electron microscope. At 1040 K, reflections began to split along the c-direction in the selected area diffraction pattern. This indicates that a new phase appears in the original phase matrix; the c length of the new phase is 1.5% longer than that of the original phase. After about 5 min, the original phase disappears. No change in the crystal symmetry (space group I4/mmm) is observed above 1040 K.